Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #2012325

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012325
Expiry date:: 31/12/2025
Size:: See model
Marking:: PPI, WRAS & date of manufacture (YYYY) on crimp connector.
Installation Requirements:: R001
Model:: DN8 bore diameter hose. BZG-A-B-C-XXXX Where A-B-C-XXXX can be replaced by the following options: BZG – Connection A - Connection B – Outer braided material – Length A-B Connection A and Connection B (from 01 to 13): 01=F1/2 02=F1/2 Conical Connection 03=F3/8 04=F3/4 05=15mm compression fitting (17-100) 06=F15 07= F10 08= M8*1 (L=12-100) 09= M10*1 (L=12-100) 10= M12*1 (L=12-100) 11= M12*1 (two O ring) 12= M14*1 13=T connection (L=2-110） C= Outer braided material: SS = stainless steel wire. NY= grey or black nylon wire. SR= stainless steel wire plus red nylon wire. SB= stainless steel wire plus blue nylon wire. NR= grey or black nylon wire plus red nylon wire. NB= grey or black nylon wire plus blue nylon wire. XXXX Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.
Manufacturer:: PPI Xiamen Industry Co Ltd

Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

WRAS Approval Number: #2104043

Range of stainless-steel braided EPDM lined flexible hose assemblies, incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104043
Expiry date:: 30/04/2026
Size:: FS-BH-F1/2*M10: ½” captive nut x M10. FS-BH-F3/8*M10: ⅜” captive nut x M10. FS-BH-F9/16*M10: 9/16” captive nut x ½” captive nut. FS-BH-F1/2*1/2: ½” captive nut x ½” captive nut.
Marking:: Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: FS-BH-F1/2*M10 (φ 11, φ 12. Length: 250mm-1500mm). FS-BH-F3/8*M10 (φ11. Length: 250mm-1500mm). FS-BH-F9/16*M10 (φ11. Length: 250mm-1500mm). FS-BH-F1/2*1/2 (φ 11, φ 12, φ 14. Length: 250mm-1500mm).
Manufacturer:: Kaiping Fushun Sanitary Ware Co., Ltd

Company Name
Kaiping Fushun Sanitary Ware Co., Ltd
Address
The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City
Country
China
Phone
0750-2707296

View All Listings by this Company

WRAS Approval Number: #2104308

Range of PEX lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104308
Expiry date:: 30/04/2026
Size:: See model.
Marking:: Kloe, WRAS, date of manufacture (M/Y Month = A to L, Year L to W).
Installation Requirements:: R001 R008
Model:: KLOE-PEX01 series/ Ø12(DN8) available with connections: 3/8''FIP 3/8''FIP(Elbow) ½"FIP(Ø12,Ø14) ½"MIP ½"FIP(Elbow)(Ø12) ¾"FIP M8*1(Short) M8*1(Long) M10*1(Short) M10*1(Long) M12*1(Short) M12*1(Long) 15MM Ø14(DN10) available with connections: 3/8''FIP ½"FIP(Ø12,Ø14) ¾"FIP M12*1(Short) M12*1(Long) 15MM M15*1(Female) Ø17(DN12) available with connections: ½"FIP(Ø17) ½"MIP ½"FIP(Elbow)(Ø17) ¾"FIP 15MM 22MM
Manufacturer:: Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name
Taizhou Kloe Dafeng Plumbing Co, Ltd.
Address

View All Listings by this Company

WRAS Approval Number: #2104309

Range of EPDM lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104309
Expiry date:: 30/04/2026
Size:: See model.
Marking:: Kloe, WRAS, date of manufacture (M/Y, Month = A to L, Year L to W).
Installation Requirements:: R001
Model:: KLOE-EPDM01 series: Ø12(DN8) available with connections: 3/8''FIP 3/8''FIP(Elbow) ½"FIP(Ø12,Ø14) ½"MIP ½"FIP(Elbow)(Ø12) ¾"FIP M8*1(Short) M8*1(Long) M10*1(Short) M10*1(Long) M12*1(Short) M12*1(Long) 15MM Ø14(DN10) available with connections: 3/8''FIP ½"FIP(Ø12,Ø14) ¾"FIP M12*1(Short) M12*1(Long) 15MM M15*1(Female) Ø17(DN12) available with connections: ½"FIP(Ø17) ½"MIP ½"FIP(Elbow)(Ø17) ¾"FIP 15MM 22MM
Manufacturer:: Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name
Taizhou Kloe Dafeng Plumbing Co, Ltd.
Address

View All Listings by this Company

WRAS Approval Number: #2104328

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104328
Expiry date:: 30/04/2026
Note:: R008 applies to hoses fitted with white plastic push fittings.
Size:: See model.
Marking:: Tucai, NT, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:: R001 R008
Model:: TAQ MINI // TAQ MINI ACB: hose bore=DN6, End connections= M15X1 Captive Nut, M8X1, 1/2" Captive Nut, M10X1, 3/8 " Captive Nut, 3/8" Elbow, M15X1, Clip10, 1/2" Elbow, Pipe end 10mm, Pipe end 15mm, Clip11. TAQ // TAQ ACB: hose bore=DN8, End connections= M10X1, M15X1, Clip11 , 1/2" Captive Nut, 3/8” Captive Nut, 3/8” Elbow, Compression fitting 12mm, M12X1, 3/8" BSP, 1/2" BSP, Compression fitting 10mm, Compression fitting 15mm, Pipe end 10mm, Pipe end 15mm, 1/2" Elbow, 1/2" valve, Clip10, M15x1 Captive nut, M8X1. TAQ FORTE // TAQ FORTE ACB: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) TAQ SUPER // TAQ SUPER ACB: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.
Factor:: Tucai S.A.

Company Name
Tucai S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:: Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #2105038

Chrome plated interlocked stainless steel shower hose with an EPDM inner liner and EPDM gaskets. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2105038
Expiry date:: 31/05/2026
Note:: Open outlet use only.
Size:: ½” BSP captive nut x ½” BSP captive nut.
Marking:: Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: FS001-shower hose (500mm-2000mm).
Manufacturer:: Kaiping Fushun Sanitary Ware Co., Ltd

Company Name
Kaiping Fushun Sanitary Ware Co., Ltd
Address
The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City
Country
China
Phone
0750-2707296

View All Listings by this Company

WRAS Approval Number: #2107803

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2107803
Expiry date:: 31/07/2026
Size:: See model
Marking:: FQR, year of manufacture (YY) DN & WRAS on ferrule.
Installation Requirements:: R001
Model:: DN6 – DN6W, P6W series: 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN8 – DN8W, P9W series: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN10 – DN10W series: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2” DN13 – DN13W series: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva
Manufacturer:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100

View All Listings by this Company

WRAS Approval Number: #2108803

UWILL range of PVC and PEX lined shower hoses (model UW-MS1003 is PEX lined), (models UW-MS1003 and UW-MS1005) incorporate corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2108803
Expiry date:: 30/06/2026
Note:: Open outlet use only.
Size:: ½” captive nut end connections
Marking:: UWILL, WRAS, Year of manufacture (YYYY)
Installation Requirements:: R001
Model:: UW-MS1003XX UW-MS1005XX UW-SC2003 End connector size for all models is G1/2 XX means the different outer finish ,XX=01,02,03,04,05,06： 01=CP chrom plating 02=EA electropolishing 03=Brushed nickel plating 04=ORB 05=matte black 06= Natural Brass
Manufacturer:: Xiamen Uwill Sanitary Ware Co. Ltd.

Company Name
Xiamen Uwill Sanitary Ware Co. Ltd.
Address
3rd Floor, No. 82th Building, Guankouzhonglu, Jimei District
Country
Xiamen,

View All Listings by this Company

WRAS Approval Number: #2104339

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104339
Expiry date:: 30/04/2026
Note:: R008 applies to hoses fitted with white plastic push fittings.
Size:: See model.
Marking:: Kingfisher brand logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:: R001 R008
Model:: FLOMASTA: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) FLOMASTA: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.
Factor:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 PaddingtonSquare, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2109052

Range of stainless steel braided, EPDM lined flexible hose assemblies available in a range of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2109052
Expiry date:: 30/09/2026
Size:: DN6 bore diameter hose available with end connections: 3/8” BSP (F), 1/2” BSP (F), M8X1 (M), M10X1 (M), M15X1 (M) or M15X1 (F) DN8 bore diameter hose available with end connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), M8X1 (M), M10X1 (M), M12X1 (M), 15mm Compression or M15X1 (F)
Marking:: WRAS, Hengle and date of manufacture (YYYY) on sleeve
Installation Requirements:: R001
Model:: HL-SS-E
Manufacturer:: Zhejiang Hengle Sanitary Co., Ltd.

Company Name
Zhejiang Hengle Sanitary Co., Ltd.
Address
Ganjiang Industrial, Yuhuan, Zhejiang
Country
China

View All Listings by this Company