Steaming Ovens

Section Code 1690 :

Back To Directory Sections

#1903337

Range of floor standing atmospheric steaming ovens. The water supply is controlled via a float operated valve assembly and the product incorporates a double check valve (suitable for backflow protection against Fluid Category 3) with an integral isolation valve at the inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C. Cold water supply only.

Section:
1690 Steaming Ovens
WRAS Approval Number:
1903337
Expiry date:
31/03/2024
Note:
Discharge to drain must be via a type AA, AB or AD air gap or in accordance with EN1717.
Size:
½” BSP (M)
Marking:
Lincat on drip tray.
Installation Requirements:
R001
Model:
OE7503, OE7505, OG7502/N, OG7504/N, OG7502/P & OG7504/P.
Factor:
Lincat Ltd
Company Name
Lincat Ltd
Address
Whisby Road Lincoln Lincolnshire
Postcode
LN6 3QZ
Phone
+44 (0) 1522 875500
General Email
sales@lincat.co.uk

View All Listings by this Company

Print This Approval


#1910340

BX range of floor standing atmospheric steaming ovens. The water supply is controlled via a solenoid valve assembly. Product incorporates a manually adjustable pressure reducing valve and in line filter assembly. The unit can be supplied with or without a washing system depending on model variant. Product is supplied with a double check valve assembly (suitable for backflow protection against Fluid Category 3) Maximum working pressure 5.0 bar. Maximum operating temperature 100°C.

Section:
1690 Steaming Ovens
WRAS Approval Number:
1910340
Expiry date:
31/10/2024
Size:
3/4” BSP (M)
Marking:
Angelo Po on front door.
Installation Requirements:
R001 R510
Model:
BX COMBI OVENS BX ovens without washing system: BX61G; BX61GR; BX61E; BX61ER; BX101G; BX101GR; BX101E; BX101ER; BX82G; BX82E; BX122G; BX122E BX ovens with washing system: BX61GW; BX61GWR; BX61EW; BX61EWR; BX101GW; BX101GWR; BX101EW; BX101EWR;
Manufacturer:
Angelo Po Grandi Cucine SpA
Company Name
Angelo Po Grandi Cucine SpA
Address
Romana Sud 90/F, 41012 Carpi (MO), Italy

View All Listings by this Company

Print This Approval


#2004350

Range of atmospheric steaming ovens. The water supply is controlled via a solenoid valve. The products are supplied with dual layer supply hoses with a grey PVC outer layer and black PVC inner layer. Maximum working pressure 4.0 bar. Cold supply only.

Section:
1690 Steaming Ovens
WRAS Approval Number:
2004350
Expiry date:
30/04/2025
Size:
¾” BSP captive nut (to supply hose)
Marking:
Fagor on control panel.
Installation Requirements:
R001 R160
Proviso:
Discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
Model:
FAGOR CONCEPT ACE-061 electric, FAGOR CONCEPT ACE-061 I electric, FAGOR CONCEPT ACE-101 electric, FAGOR CONCEPT ACE-101 I electric, FAGOR CONCEPT ACE-102 electric, FAGOR CONCEPT ACE-201 electric, FAGOR CONCEPT ACE-201-C electric, FAGOR CONCEPT ACE-202 electric, FAGOR CONCEPT ACE-202-C electric, FAGOR CONCEPT ACG-061 gas, FAGOR CONCEPT ACG-101 gas, FAGOR CONCEPT ACG-102 gas, FAGOR CONCEPT ACG-201 gas, FAGOR CONCEPT ACG-201-C gas, FAGOR CONCEPT ACG-202 gas, FAGOR CONCEPT ACG-202-C gas, FAGOR CONCEPT ACE-0632 gas.
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30

View All Listings by this Company

Print This Approval


#2103329

Range of atmospheric steaming ovens having a 25 litre, 70 litres or two 25 litres capacity chambers. The water supply is controlled via a solenoid valve and incorporates a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar & maximum operating temperature 23°C.

Section:
1690 Steaming Ovens
WRAS Approval Number:
2103329
Expiry date:
31/03/2026
Size:
¾” BSP(M)
Marking:
Hobart, manufacturers address, model, serial no, date of manufacture and other technical information on panel. Serial number, manufacturing date code and other technical information.
Installation Requirements:
R001 R574
Model:
Bonnet model numbers are 205GB, 205TB, 305GB, 305TB & 2228B Hobart model numbers are 205GH, 205TH, 305GH, 305TH & 2228H
Manufacturer:
Hobart Manufacturing UK
Company Name
Hobart Manufacturing UK
Address
Braunton Road Barnstaple Devon
Postcode
EX31 1GD

View All Listings by this Company

Print This Approval


#2110369

‘Concept’ & ‘Advance’ ranges of atmospheric steaming ovens. The products incorporate a retractable triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The water supply is controlled via a solenoid valve. The retractable hose has its own dedicated supply also controlled via a solenoid valve. The products are supplied with dual layer supply hoses (grey PVC outer layer/black PVC inner layer) with ¾” captive nut end connections, and chrome plated DZR brass ½” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet. Maximum working pressure 4.0 bar. Cold supply only.

Section:
1690 Steaming Ovens
WRAS Approval Number:
2110369
Expiry date:
31/10/2026
Note:
Cleaning chemicals and detergents used in the automatic spray washing function must not represent a Fluid Category risk higher than Fluid Category 3. The Fluid Category of risk associated with the retractable hose and self-closing trigger supplied with this appliance can only be determine by the Water Regulations/Byelaws (Scotland) department of the local Water Supplier in the area of installation, which will require a site specific risk assessment. Under Regulation/Byelaw 3 and schedule 2 paragraph 15, the installer must ensure sufficient backflow protection is provided in line with the findings of the risk assessment. R008 applies to the solenoid inlet.
Size:
¾” BSP (M) (to solenoid)
Marking:
Fagor, Serial No., Model No., Ref No., manufacturing date (MM/YY) and other technical information on top panel. Fagor on front casing. Range name on front panel.
Installation Requirements:
R001 R008 R009 R160
Proviso:
Discharge to drain must be via a Type AA, AB or AD air gap or in accordance with EN 1717.
Model:
‘Concept’ & ‘Advance’ range: C-061-E-D, C-061-E-I, CW-061-E-D, CW-061-E-I, A-061-E-D, A-061-E-I, AW-061-E-D, AW-061-E-I, C-101-E-D, C-101-E-I, CW-101-E-I, CW-101-E-D, A-101-E-D, A-101-E-I, AW-101-E-D, AW-101-E-I, C-102-E-D, C-102-E-I, CW-102-E-D, CW-102-E-I, A-102-E-D, A-102-E-I, AW-102-E-D, AW-102-E-I, C-201-E, C-201-E-C, CW-201-E, CW-201-E-C, A-201-E, A-201-E-C, AW-201-E, AW-201-E-C, C-202-E, C-202-E-C, CW-202-E, CW-202-E-C, A-202-E, A-202-E-C, AW-202-E, AW-202-E-C, C-0623-E-D, CW-0623-E-D, A-0623-E-D, AW-0623-E-D, C-061-G-D, C-061-G-I, CW-061-G-D, CW-061-G-I, A-061-G-D, A-061-G-I, AW-061-G-D, AW-061-G-I, C-101-G-D, C-101-G-I, CW-101-G-D, CW-101-G-I, A-101-G-D, A-101-G-I, AW-101-G-D, AW-101-G-I, C-102-G-D, C-102-G-I, CW-102-G-D, CW-102-G-I, A-102-G-D, A-102-G-I, AW-102-G-D, AW-102-G-I, C-201-G, C-201-G-C, CW-201-G, CW-201-G-C, A-201-G, A-201-G-C, AW-201-G, AW-201-G-C, C-202-G, C-202-G-C, CW-202-G, CW-202-G-C, A-202-G, A-202-G-C, AW-202-G, AW-202-G-C, Where: C prefix = Concept models. A prefix = Advance models. E = Electric oven. G = Gas oven. W = Oven with automatic washing system. Numbers denote the capacity of the oven: 0623: 6 trays GN-2/3. 061: 6 trays GN-1/1 - 12 trays GN-1/2. 101: 10 trays GN-1/1 - 20 trays GN-1/2. 102: 10 trays GN-2/1 - 20 trays GN-1/1. 201: 20 trays GN-1/1 - 40 trays GN-1/2. 202: 20 trays GN-2/1 - 40 trays GN-1/1. I = Left door opening. R = Right door opening. C = Model with trolley.
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30

View All Listings by this Company

Print This Approval


#2311064

Range of electronic steaming ovens with flow controlled via solenoid valve. Maximum working pressure 6 Bar Cold water use

Section:
1690 Steaming Ovens
WRAS Approval Number:
2311064
Expiry date:
30/11/2028
Size:
Stainless steel braided HDPE lined flexible hose assembly with 3/4" BSP captive nut end connections
Marking:
Wiesheu logo on front of body. Wiesheu logo, model, date of manufacture (YYYYMM), voltage and other technical information on adhesive label on side of body.
Installation Requirements:
R001 R160
Model:
X3000 Dibas blue2 S X3100 Dibas blue2 M X3200 Dibas blue2 L X4000 E3 S X4200 E3 L
Manufacturer:
Wiesheu GmbH
Company Name
Wiesheu GmbH
Address

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.