Range of cold water supply booster sets, incorporating a stainless steel manifold system and between 1 and 4 pumps depending on model. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels. Maximum working pressure 10.0 bar or 16.0 bar, dictated by the pump model(s) fitted. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2006073

Expiry date:

30/06/2025

Note:

Please consult the technical information located on the pump to determine the maximum working pressure of the booster set.

Size:

Manifold connections (suction and discharge): 1”, 1 ¼”, 1 ½”, 2”, 2 ½” or 3” BSP (M).

Marking:

Lowara or Goulds Water Technology, model, serial number and technical information on adhesive label on control panel.

Installation Requirements:

R001 R415

Model:

GHV10, GHV20, GHV30 or GHV40 series. Full model code format: GHVzzyy/A/xxxxxxxxxx/wv/uuuu/tt/ss Where: zz = number of pumps: 10 = 1 pump. 20 = 2 pumps. 30 = 3 pumps. 40 = 4 pumps. yy = Non return valve position: Left blank = delivery side. RA = suction side. xxxxxxxxxx = pump model fitted: 10 digit code. w = power supply: 2 = single phase 1 x 230V. 3 = three phase 3 x 230V. 4 = three phase 3 x 400V. v = additional card. Left blank = no card, c = premium card. uuuu = material used: [ _ ] = Standard version. [A304] = special AISI 304. [B304] = special AISI 304. [C304] = special AISI 304. [A316] = special AISI 316. [B316] = special AISI 316. [C316] = special AISI 316. tt/ss = options: [BAP]. [2S]. [PQ]. [3A]. [SC]. [PA]. [3B]. [SR]. [60]. Example code: GHV10RA/A/5SV08F011T/2C/A304/PA/SR

SMB10, SMB20 or SMB30 series. Full model code format: SHVzzyy/A/xxxxxxxxxx/vv/UK/uuuu/tt/ss Where: zz = number of pumps: 10 = 1 pump. 20 = 2 pumps. 30 = 3 pumps. yy = Non return valve position: Left blank = delivery side. RA = suction side. xxxxxxxxxx = pump model fitted: 10 digit code. w = power supply: M2 = single phase 1 x 230V. T3 = three phase 3 x 230V. T4 = three phase 3 x 400V. v = additional card. Left blank = no card, c = premium card. uuuu = material used: [ _ ] = Standard version. [A304] = special AISI 304. [B304] = special AISI 304. [C304] = special AISI 304. [K304] = special AISI 304. [A316] = special AISI 316. [B316] = special AISI 316. [C316] = special AISI 316. tt/ss = options: [3A]. [SM]. [3B]. [RE]. [SQ]. [BAP]. [IP65]. [SA]. [SR]. [C9]. [PA]. [SC]. [CM]. [PE]. [SCA]. [DR1]. [SCM]. [WM]. Example code: SMB20RA/A/5SVE08R015/M2/A304/PE/RE

Factor:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Lombardi 14, 36075 Montecchio Maggiore VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Self-priming electric booster pump with plastic body incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 8.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012700

Expiry date:

31/12/2025

Size:

1” BSP (F)

Marking:

DAB, model number and other technical info on adhesive label on front of body.

Installation Requirements:

R001 R415

Model:

E.sybox electronic water pressure system

Factor:

DAB Pumps Spa

Company Name

DAB Pumps Spa

Address

Via Marco Polo 35035 Mestrino (PD) Italy

Phone

Tel: +39 0499 048811 Fax: +39 0499 000179

View All Listings by this Company

Pent-A-Boost domestic break tank and booster set incorporating a single or dual pump stage pump set assembly and break cistern (incorporating an AG air gap arrangement). Inlet level sensors control the water supply via solenoid valves with inline strainers fitted (see manufacturers data sheet for optional arrangements). The unit also incorporates an expansion vessel. Flow from the break tank is via a single check valve suitable for fluid category 2 to a booster pump arrangement (see manufacturers data sheet for optional arrangements). Maximum working pressure 10 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2005341

Expiry date:

31/05/2025

Size:

See model

Marking:

Pent-a-boost, arrow valves, contact details, serial no, product code and other technical information on control box.

Installation Requirements:

R001 R415

Model:

Single Pump, Single Filling Solenoid - Inlet ¾” BSP (F) S/S Hose captive nut x ¾” BSP (F) S/S Hose captive nut: BTAF3-5 BTAF3-7 BTAF3-10 BTAF1-5 BTAF1-6 BTAF1-7 BTAF1-8 BTAF1-9 BTAF1-10 Single Pump, Two Filling Solenoids – Inlet 1 ¼” x 1” Reducing nipple: BTAF5-4 BTAF5-10 BTAF2-5 BTAF5-16 BTAF2-7 BTAF2-8 Dual Pump, 24 Litre Break Tank (up to 2.0 Lt/s) – Inlet 1 ¼” x 1” Reducing Nipple: BTAF3-7S BTAF3-10S BTAF5-4S BTAF5-8S BTAF3-5A BTAF3-7A BTAF3-10A Dual Pump, 100 Litre Break Tank (3.0 Lt/s) – Inlet 1” FxF Elbow: BTAF5-8A

Manufacturer:

Arrow Valves Ltd

Company Name

Arrow Valves Ltd

Address

York House Northbridge Road Berkhamsted Hertfordshire

Postcode

HP4 1TA

Country

Herts

Phone

01442 823 123

View All Listings by this Company