Water Regulations Approval Scheme Ltd

Pumps

Section Code 1610 : Wholesome water use.

WRAS Approval Number: #2305078

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: FGV30, FGV45 - 32.0 bar, FGV65, FGV95 - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2305078
Expiry date:: 31/05/2028
Size:: DN65 - DN100
Marking:: Fourgroup, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body. Flow arrow on body.
Installation Requirements:: R001 R415
Model:: FGV range. Code example (FGV range): FGV 30 /13 A B C D E F G H J K L M N. Where: FGV = Pump model FGV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). FGV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); FGV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); FGV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); FGV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).
Factor:: FOURGROUP

Company Name
FOURGROUP
Address
via E. Fermi 8, 35020 Polverara (PD)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2204361

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2204361
Expiry date:: 30/04/2027
Size:: 1” BSP (F)
Marking:: SPCO and model number other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: SMART PLUS 370-25-A, (370W), 25m (Rated Head), SMART PLUS 550-24-A, (550W), 24m (Rated Head), SMART PLUS 750-30-A, (750W), 30m (Rated Head), SMART PLUS 550-22-Z-A, (550W), 22m (Rated Head), SMART PLUS 750-28-Z-A, (750W), 28m (Rated Head), SMART PLUS 850-30-A, (850W), 65m (Rated Head).
Factor:: Swiss Pump Company AG

Company Name
Swiss Pump Company AG
Address
Moosweg 36,3645 Thun - Gwatt
Country
Switzerland

View All Listings by this Company

WRAS Approval Number: #2305084

Range of vertical multistage pumps with cast iron bodies with a black electrodeposition coating, stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: MVX 30 & MVX 45- 32.0 bar, MVX 65 & MVX95 VR - 25.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2305084
Expiry date:: 31/05/2028
Size:: DN65 - DN100
Marking:: Sea-Land SRL, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.
Installation Requirements:: R001 R415
Model:: Code example - MVX range: MVX 30 /13 A B C D E F G H J K L M N. Where: MVX = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). MVX30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); MVX45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); MVX65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); MVX95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).
Factor:: Sea-Land Srl

Company Name
Sea-Land Srl
Address
Via E Mattei 25 35038 Torreglia Italy

View All Listings by this Company

WRAS Approval Number: #2204362

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2204362
Expiry date:: 30/04/2027
Size:: 1” BSP (F)
Marking:: HW (Company logo) and model number other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: HMPP V JVS 10 (370W), 25m (Rated Head), HMPP V JVS 15 (550W), 24m (Rated Head) & HMPP V JVS 65 (750W), 30m (Rated Head) Water Booster Pumps.
Factor:: HWS PUMPS & VALVES CANADA INC.

Company Name
HWS PUMPS & VALVES CANADA INC.
Address
398-2416 MAIN ST VANCOUVER BC V5T 3E2 CANADA

View All Listings by this Company

WRAS Approval Number: #2309343

Range of circulating pumps with a bronze body, plastic impeller and EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2309343
Expiry date:: 30/09/2028
Size:: 1” BSP (M) or 1½” BSP (M).
Marking:: Rating plate on body including: Wilo, class, PN, model no. and date of production (YYWW).
Installation Requirements:: R001
Model:: Z Range: Z15/6-* **130**, Z15/7-* **130**, Z20/2-* **130**, Z20/2-* **140**, Z20/5-* **140**, Z20/6-* **140**, Z20/7-* **140**, Z25/6-* **180**, Z25/7-* **180**. Where: 15/20/25 = connection size: 15 or 20 = 1” BSP (M), 25 = 1½” BSP (M). 2/5/6/7 = motor power (head in mWC). * = speed number: 1,2 or 3. 1st ** = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130/140/180 = Pump body dimension (height in mm). 2nd ** = terminal box position: 12,3,6 or 9 o’clock. Example code: Z25/6-3 PL 180 12.
Factor:: Wilo Intec

Company Name
Wilo Intec
Address
50 Avenue Eugene Casella, 18700 Aubigny Sur Nere, France
Phone
+332 48 81 62 62

View All Listings by this Company

WRAS Approval Number: #2309919

‘SCALA1’ range of booster pumps with plastic bodies, plastic impellers, EPDM and NBR ‘O’-rings. The product incorporates a non-return valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2309919
Expiry date:: 30/09/2028
Note:: Cold water use only.
Size:: 1” BSP (M) inlet/outlet.
Marking:: Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, model no., and other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: SCALA1 3-25. SCALA1 3-35. SCALA1 3-45. SCALA1 5-25. SCALA1 5-35. SCALA1 5-55. Where 3 or 5 = flow rate in m³/h, 25-55 = max. head (m).
Factor:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

WRAS Approval Number: #2310307

Range of pumps, single and 4-stage, with stainless steel bodies and plastic impellers. The pumps are housed within a plastic casing. The outlets of the WGZ15-20EA, WGZ15-45EA and WGZ15-45EAB models incorporate a non-return valve. The WGZ15-35EA.and WGZ15-35EAB models have a twin pump arrangement which incorporates a non-return valve within the connecting pipe between the pumps. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2310307
Expiry date:: 31/10/2028
Size:: 1” BSP (F).
Marking:: Zhejiang Wigo Intelligence Pump Co., Ltd.GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), Model No. and other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: Frequency conversion booster pumps with 4 stages: WGZ15-45EA, WGZ15-45EAB. Frequency conversion booster pumps with single stage: WGZ15-20EA, WGZ15-35EA, WGZ15-35EAB.
Manufacturer:: Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name
Zhejiang Wigo Intelligence Pump Co., Ltd.
Address
No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2310317

Range of circulation pumps with a stainless steel body, plastic impeller and a silicone ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2310317
Expiry date:: 31/10/2028
Size:: ½” BSP (F).
Marking:: GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), type, pressure, WRAS and other technical information on adhesive label on pump face. Flow arrow on body
Installation Requirements:: R001
Model:: RS12/1.2EM. RS12/1.2EMB.
Manufacturer:: Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name
Zhejiang Wigo Intelligence Pump Co., Ltd.
Address
No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2310916

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2310916
Expiry date:: 31/10/2028
Size:: CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.
Marking:: Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.
Installation Requirements:: R001 R415
Model:: Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.
Factor:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

WRAS Approval Number: #2311312

Range of two stage horizontal water pumps with plastic bodies, stainless steel impellers and shaft, incorporating EPDM gaskets and seals. The products also incorporate a non-return valve (not suitable for backflow protection) and an shock arrestor expansion vessel. Maximum working pressure 1.8 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2311312
Expiry date:: 30/11/2028
Size:: 1” BSP (F).
Marking:: Wilo and Wilo address, model number + date of manufacture (/ YYwWW), e.g., 3082244 / 23w16 and technical information on adhesive label on body.
Installation Requirements:: R001 R415
Model:: 3082244 - PE-410MA (60Hz), 302076 - PE-350EA (50Hz), 3075656 - Medana PE3-350EA (50Hz).
Manufacturer:: WILO Pumps Ltd.

Company Name
WILO Pumps Ltd.
Address

View All Listings by this Company