Water Regulations Approval Scheme Ltd

Miscellaneous Fittings

Section Code 1530 :

WRAS Approval Number: #1909006

Pressure boosting system suitable for direct connection to a wholesome water supply. The product discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a quadruple layered flexible inlet hose consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and white PVC outer layer. The water downstream of the AB airgap assembly is not for wholesome use. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 1909006
Expiry date:: 30/09/2024
Size:: ¾” BSP captive nut (to inlet hose)
Marking:: Triton (range name), model and serial number on label on rear of body.
Installation Requirements:: R001 R574
Model:: Triton Water Booster DE16-0440 & DE16-0434
Factor:: Depatie Fluid Power

Company Name
Depatie Fluid Power
Address

View All Listings by this Company

WRAS Approval Number: #1909323

Range of combined bath filler and/or waste and overflow assemblies in various finishes. Maximum operating temperature 60ºC.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 1909323
Expiry date:: 30/09/2024
Note:: Open outlet use only. No testing performed on pop-up waste (SK122YY.XX model).
Size:: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections (except for the SK14YY.XX & SK14-1.XX models, which are only a waste and overflow).
Marking:: WRAS approved, CGS logo, product code on face plate
Installation Requirements:: R001 R090 R160
Model:: Combined bath filler, click waste and overflow: SK134YY.XXWRAS, SK134-1.XX. Models added August 2020: Combined bath filler, pop-up waste and overflow: SK122YY.XX. Combined bath filler, click waste and overflow: SK132YY.XX, SK157YY.XX Models added March 2024: Click waste and overflow: SK14YY.XX, SK14-1.XX ‘YY’ denotes the pipe length up to max. 80cm. The pipe length of the SK134-1.X & SK14-1.XX models is max. 125cm. ‘XX’ denotes finish and is replaced with: 01 - Standard Chrome, 05 - PVD Chrome, 06 - Black Chrome, 12 - Gold, 15 - Rose Gold, 17 - PVD Gold, 25 - Brushed Bronze, 26 - Brushed Copper, 33 - White Matt, 35 - White, 43 - Black Matt, 45 - Black, 40 - Brushed Nickel
Manufacturer:: CGS Srl

Company Name
CGS Srl
Address
Via Torino 9/A 28060 Cureggio (NO)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #1907917

In-line plastic flow regulator housed within a brass body incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 1907917
Expiry date:: 31/07/2024
Size:: ¾” BSP (M) inlet and outlet
Marking:: HL2024 (brand of HGP), flow arrow, flow rate, model (3P) and size on adhesive label on body.
Installation Requirements:: R001 R120
Model:: HL2024 Inline 3P 3-4 M-M From August 2020 the model will change to HL2024 Inline 3P 3-4 M-M change to HL2024 Inline Cartridge 3P 3/4’’ Model added August 2020: HL2024 Control Flow 3P 3/4’’
Manufacturer:: HaGePe International B.V (HGP International)

Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen
Country
Netherlands

View All Listings by this Company

WRAS Approval Number: #1907915

In-line plastic flow regulator housed within a brass body (chrome plated) incorporating a plastic strainer and an EPDM ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 1907915
Expiry date:: 31/07/2024
Size:: ½” BSP (F) inlet x ½” BSP (M) outlet
Marking:: HL2024 (brand of HGP) and flow arrow on body. Marking from June 2021: HL2024 (brand of HGP), KIWA Z OL and flow arrow on body.
Installation Requirements:: R001 R040
Model:: HL2024 Shower regulator
Manufacturer:: HaGePe International B.V (HGP International)

Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen
Country
Netherlands

View All Listings by this Company

WRAS Approval Number: #1907380

Thermostatic circulation valve incorporating a DZR brass body and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 1907380
Expiry date:: 31/07/2024
Size:: ½” BSP (F) (DN15), ¾” BSP (F) (DN20) & 1” BSP (F) (DN25).
Marking:: ALBION VALVES LOGO, flow arrow, DN, PN & CN ON BODY
Installation Requirements:: R001
Model:: ART 32
Factor:: Albion Valves (UK) Limited

Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley South Yorkshire
Postcode
S75 3LS
Country
United Kingdom

View All Listings by this Company