Range of pressure transmitters with stainless steel bodies and EPDM ‘O’-rings. Maximum working pressures: 520 XXX range 100.0 bar, 522 XXX range & 540 XXX range 60.0 bar. Maximum operating temperature 520 XXX & 522 XXX range 99°C & 540 XXX range 80°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2004017

Expiry date:

30/04/2025

Size:

G½” sealed at front with manometer, G½” sealed at front, 7/16” -20 UNF sealing cone, ¼” -18 NPT sealing thread, G¼” sealed at front, G¼” sealed at back DIN 3852-E, R¼” sealing thread EN 10226, ¼” -18 NPT inside sealing thread, M20x1.5 sealed at front with manometer, ¼” -14 NPT inside sealing thread, G¼” sealed at front with manometer, 1/8” -27 NPT sealing thread, G1/8” sealed at front, G¼” sealed at front, G¼” sealed at back DIN 3852-E with manometer, 7/16” -20 UNF inside sealed at front SAE J1926-1 / ISO 11926-1, 7/16” -20 UNF inside sealing cone with Schrader, 7/16” -20 UNF inside sealing cone, ½” -14 NPT sealing thread, G¼” sealed back.

Marking:

520 and 522 models: HUBA CONTROL, article number and date of manufacture (YY/MM/DD) on body. 540 models: HUBA CONTROL on adhesive label on face. Article number and date of manufacture (YY/MM) on adhesive label on body.

Installation Requirements:

R001

Model:

520 XXX, 522 XXX & 540 XXX ranges. ‘XXX’ is replaced with various numbers denoting pressure range, application, power supply, electrical connections and other parameters which do not relate to water contact

Factor:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Crane brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2008700

Expiry date:

31/08/2025

Size:

¼" BSP (M) taper threaded.

Marking:

Crane logo, WRAS and temperature on plastic tag.

Installation Requirements:

R001

Model:

Crane P84 Pressure Test Points.

Factor:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Phone

01473 277 364

General Email

bwiggins@crane-ltd.co.uk

View All Listings by this Company

Hattersley brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2008701

Expiry date:

31/08/2025

Size:

¼" BSP (M) taper threaded.

Marking:

Hatterlsley logo, WRAS and temperature on plastic tag.

Installation Requirements:

R001

Model:

Hattersley Fig 631 PRESSURE TEST POINTS

Factor:

Hattersley

Company Name

Hattersley

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

View All Listings by this Company

‘Cart’ range of plastic flow regulators within a plastic housing and either silicone, EPDM or NBR sealing gaskets and optional stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005300

Expiry date:

31/05/2025

Size:

14.68mm OD

Marking:

Neoperl on body.

Installation Requirements:

R001

Model:

cart - AB.CDEF.GHIJK Where: AB – denotes 31 CDEF – manufacturers sequential number GHIJK – packaging variations

Manufacturer:

Neoperl UK

Company Name

Neoperl UK

Address

View All Listings by this Company

Wall plate elbow (105° angle) with a brass body. Maximum operating temperature 100°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2005327

Expiry date:

31/05/2025

Note:

Open outlet use only.

Size:

½” BSP (F) x 15mm compression serrated hose connection.

Marking:

Interplast logo on body

Installation Requirements:

R001 R040

Model:

800011620

Manufacturer:

Interplast SA

Company Name

Interplast SA

Address

10th KM National Road THessaloniki Katerni PO Box 62

Country

57400 Sindos

Phone

+30 2310 795531 Fax: +30 31 795373

View All Listings by this Company