Water Meter Manifolds

Section Code 1510 :

Back To Directory Sections

#2110358

Range of water meter assemblies which incorporating DZR brass bodies, spherical valve and pressure reducing valve (1.5 to 6.0 bar range). The products incorporate two approved, in-line single check valve cartridges, (verified by test, suitable for backflow protection against Fluid Category 3). Fitting is also supplied with a pressure guage. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2110358
Expiry date:
31/10/2026
Size:
¾” with straight connector or meter connection. 1” with straight connector or meter connection.
Marking:
Essco Controls, CR, flow arrow and size on body.
Installation Requirements:
R001
Model:
ESS-90501035 PRV-CON. ESS-90501101 PRV-CON. ESS-90501035 CARRIER PRV-CON. ESS-90501101 CARRIER PRV-CON.
Factor:
Essco Controls Ltd
Company Name
Essco Controls Ltd
Address
Unit 5, Nelson Ind Park Herald Road Hedge End
Postcode
SO30 2JH
Country
Southampton

View All Listings by this Company

Print This Approval


#2111325

Range of water meter manifolds (also known as double box valves) for use with MDPE pipe (manufactured to BS EN 12201). The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2111325
Expiry date:
30/11/2026
Size:
25mm & 32mm push-fit
Marking:
Talis, Talis logo & flow arrow on body.
Installation Requirements:
R001
Model:
‘Talbot Double Box Valves’: MB57425U Matrix Double Box Inlet 2 x 25mm PF, Outlet 2 x 25mm PF. MB5743225U Matrix Double Box Inlet x 32mm PF Tee, Outlet 2 x 25mm PF. MB5743232U Matrix Double Box inlet 1 x 32mm PF Tee, Outlet 2 x 32mm PF. MB57432U matrix Double Box Inlet 2 x 32mm PF, Outlet 2 x 32mm PF.
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2112037

Range of ‘Resident Valves’ with a DZR brass body consisting of water meter manifold, an isolation valve on the inlet, a pressure reducing valve (adjustable between 1.5 and 6.0 bar) and 2 non-return valves which are located on the outlet of the water meter manifold. The ‘Plus’ models are also supplied with an isolation valve on the outlet, which incorporates a drain tap. Maximum supply pressure 16.0 Bar. Cold water above ground use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2112037
Expiry date:
31/12/2026
Size:
See model.
Marking:
Main body: Pegler (Pegler is a brand of Aalberts integrated piping systems Ltd.), Pegler logo, flow arrow, size, pressure and CR on body. Isolation valve: Pegler and Pegler logo, CR and PN on body.
Installation Requirements:
R001 R120 R511
Model:
Pegler RES1 Resident Valve 3/4x1 MF (5A3001): ¾” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES1 Resident Valve 1X1 MF (5A3002): 1” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES2 Resident Valve Plus 3/4 FF (5A3021): ¾” BSP (F) inlet/outlet. Pegler RES2 Resident Valve Plus 1 FF (5A3022): 1” BSP (F) inlet/outlet.
Factor:
Aalberts IPS Ltd.
Company Name
Aalberts IPS Ltd.
Address
St. Catherines Avenue Doncaster
Postcode
DN4 8DF

View All Listings by this Company

Print This Approval


#2201344

Range of water meter manifolds (plastic body). Model WB31520CG incorporates a single check valve cartridge and model WB31520CGDCV two single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2201344
Expiry date:
31/01/2027
Size:
¾” BSP (F)
Marking:
Talis on base. Flow arrow on manifold box.
Installation Requirements:
R001 R008
Model:
Talbot Matrix: WB31520CG WB31520CGDCV
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2203314

Range of water meter manifolds with gun metal bodies and ball valve with either a quarter turn stop valve or screw down stop valve. The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2203314
Expiry date:
31/03/2027
Note:
R008 applies to te plastic cap
Size:
see model
Marking:
Ebco logo, flow arrow, Foundry I.D. (QL) & date of manufacturer (MM/YY) on body.
Installation Requirements:
R001 R008
Model:
1" BSP (M) x ¾” BSP (F) models: MB1030403BM MB1030403EM MANI0461V MANI0461VW MANI0461VMCP20 MVB0250MCP40 MVB0240 MVB0241 MVB0250 MVB0255 ¾ BSP (F) x ¾” BSP (F) models: MBB0460V MBB0470V MBB0461V MBB0481V MBB0040V MBB0060V MVB0210 MVB0200 MVB0220 ¾” BSP (M) x ¾” BSP (M) models: MVB0020 MVB0030 MVB0040 MVB0045 1" BSP (M) x 1” BSP (M) MVB0230
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.