Flushing Mechanisms
Section Code 1305 : WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test.
When installed in combination with a WC cistern and pan, further performance tests will be required.
Back To Directory Sections
WRAS Approval Number: #2001017
‘Easyflush Direct’ range of WC flush valves. Flow is controlled via solenoid valve which is actuated via an infrared sensor.
The assembly incorporates a plastic flow regulator on the outlet of the solenoid.
The product is supplied with an additional brass 1½” BSP (M) x 1” BSP (F) flush pipe coupling.
Maximum working pressure 5.0 Bar. Cold water use only.
- Section:
- 1305 Flushing Mechanisms
- Section Subtitle:
- WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test.
When installed in combination with a WC cistern and pan, further performance tests will be required.
- WRAS Approval Number:
- 2001017
- Expiry date:
- 31/01/2025
- Note:
- No pressure flushing valve shall be installed:
(i) in a house, or
(ii) in any building not being a house where a minimum flow rate of 1.2 litres per second cannot be achieved at the appliance
- Size:
- 1” BSP (F) inlet/1½” BSP (M) outlet.
- Marking:
- Cistermiser on sensor face.
Cistermiser on label on valve.
- Installation Requirements:
- R001 R008 R120 R090
- Model:
-
EFD - Easyflush Direct 'Wave'
EFD/BRUSH - Easyflush Direct 'Wave'
EFD/WALK - Easyflush Direct 'Walkaway'
EFD/WALK-BRUSH - Easyflush Direct 'Walkaway'
- Manufacturer:
- Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1
Woodley Park Estate
59/69 Reading Road
Postcode
RG5 3AN
Country
Woodley
Phone
+44 118 969 1611
Fax: 0118 944 1426
View All Listings by this Company
WRAS Approval Number: #2001901
Dudley Cascade Plus dual flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.
- Section:
- 1305 Flushing Mechanisms
- Section Subtitle:
- WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test.
When installed in combination with a WC cistern and pan, further performance tests will be required.
- WRAS Approval Number:
- 2001901
- Expiry date:
- 31/01/2025
- Size:
- 1½” Outlet, Syphon heights 7” to 9½”.
Sizes added November 2021 - 1½” Outlet, Syphon heights 9½” to 11".
- Marking:
- The cap of the syphon has Cascade + and Thomas Dudley Ltd or Cronex (Cronex is a brand name of Cronexrabo which is a subsidiary company of Thomas Dudley Limited) moulded into it.
- Installation Requirements:
- R001 R556
- Model:
-
Dudley Cascade Plus
- Manufacturer:
- Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works
PO Box 28
New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411
Fax: 0121 557 5345
View All Listings by this Company
WRAS Approval Number: #1911030
Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.
Maximum operating pressure 8.0 bar. For cold water use only.
- Section:
- 1305 Flushing Mechanisms
- Section Subtitle:
- WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test.
When installed in combination with a WC cistern and pan, further performance tests will be required.
- WRAS Approval Number:
- 1911030
- Expiry date:
- 30/11/2024
- Size:
- 2” BSP (M)
- Marking:
- UNITOP, cUPC, CE, WRAS and A31 on body.
- Installation Requirements:
- R001
- Model:
-
A31
- Manufacturer:
- Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building
No. 469 Jinyuan West Road
Xinglin
Country
Jimei District
Phone
+86 592 6379968
View All Listings by this Company
WRAS Approval Number: #1911036
Dual flush, WC outlet valve. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow.
- Section:
- 1305 Flushing Mechanisms
- Section Subtitle:
- WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test.
When installed in combination with a WC cistern and pan, further performance tests will be required.
- WRAS Approval Number:
- 1911036
- Expiry date:
- 30/11/2024
- Size:
- 2" BSP (M)
- Marking:
- Siamp logo moulded on the stirrup
- Installation Requirements:
- R001 R571
- Model:
-
Optima 50 Dual Flush Valve
- Factor:
- Siamp
Company Name
Siamp
Address
4 Quai Antoine Premier
BP 219
MC 98007
Country
Monaco
Phone
Tel: +377 9315 5375
Fax: +377 9205 7104
General Email
info@siamp.co.uk
View All Listings by this Company
WRAS Approval Number: #2003356
WC dual flush valves incorporating a plastic body with a silicone seal. The valves are operated via plastic levers for either a full or reduced flush and incorporate an internal overflow.
Cold water use only.
- Section:
- 1305 Flushing Mechanisms
- Section Subtitle:
- WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test.
When installed in combination with a WC cistern and pan, further performance tests will be required.
- WRAS Approval Number:
- 2003356
- Expiry date:
- 31/03/2025
- Size:
- Ø 67mm
- Marking:
- Viega on body.
- Installation Requirements:
- R001 R571
- Model:
-
8580.138
- Manufacturer:
- Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1
D-57439 Attendorn
Country
Germany
View All Listings by this Company
Back To Directory Sections Page 2 of 18