Viega GmbH & Co. KG Approvals


#2003356

WC dual flush valves incorporating a plastic body with a silicone seal. The valves are operated via plastic levers for either a full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2003356
Expiry date:
31/03/2025
Size:
Ø 67mm
Marking:
Viega on body.
Installation Requirements:
R001 R571
Model:
8580.138
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn

View All Listings by this Company

Print This Approval


#2103302

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103302
Expiry date:
31/03/2026
Size:
½” BSP (M) inlet connection
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Model:
8502.38 WC cistern (without frame) 8522.38 with dry wall frame height 1120mm 8524.38 with dry wall frame height 1120mm 8530.38 with dry wall frame height 980mm
Factor:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn

View All Listings by this Company

Print This Approval


#2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103303
Expiry date:
31/03/2026
Size:
½” BSP (M) inlet connection.
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Model:
8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
Factor:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.