Flushing Mechanisms

Section Code 1305 : WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

Back To Directory Sections

#1911018

Range of dual flush WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
1911018
Expiry date:
30/11/2024
Size:
See model.
Marking:
HY601BL: Huiyuan, model ‘601’, date of manufacture (clock type) on body. HY603AL: Huiyuan, model ‘603’ on body.
Installation Requirements:
R001 R571
Model:
HY601BL; 65mm, HY603AL; 82mm.
Manufacturer:
Guangdong Huiyuan Technology Co., Ltd
Company Name
Guangdong Huiyuan Technology Co., Ltd
Address
Shimu Shi Road Area, Dacheng Village, Fengtang Town
Country
Chaozhou City,

View All Listings by this Company

Print This Approval


#1911033

Dual flush WC outlet valve incorporating a plastic body and silicon seal. The valve is operated by a cable linked push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
1911033
Expiry date:
30/11/2024
Size:
1½” BSP (M)
Marking:
Flomasta (brand of the Kingfisher Group) on top cap.
Installation Requirements:
R001 R571
Model:
F-F-1056-1 - 1½" Dual Flush Valve
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2001017

‘Easyflush Direct’ range of WC flush valves. Flow is controlled via solenoid valve which is actuated via an infrared sensor. The assembly incorporates a plastic flow regulator on the outlet of the solenoid. The product is supplied with an additional brass 1½” BSP (M) x 1” BSP (F) flush pipe coupling. Maximum working pressure 5.0 Bar. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2001017
Expiry date:
31/01/2025
Note:
No pressure flushing valve shall be installed: (i) in a house, or (ii) in any building not being a house where a minimum flow rate of 1.2 litres per second cannot be achieved at the appliance
Size:
1” BSP (F) inlet/1½” BSP (M) outlet.
Marking:
Cistermiser on sensor face. Cistermiser on label on valve.
Installation Requirements:
R001 R008 R120 R090
Model:
EFD - Easyflush Direct 'Wave' EFD/BRUSH - Easyflush Direct 'Wave' EFD/WALK - Easyflush Direct 'Walkaway' EFD/WALK-BRUSH - Easyflush Direct 'Walkaway'
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Country
Woodley
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2001901

Dudley Cascade Plus dual flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2001901
Expiry date:
31/01/2025
Size:
1½” Outlet, Syphon heights 7” to 9½”. Sizes added November 2021 - 1½” Outlet, Syphon heights 9½” to 11".
Marking:
The cap of the syphon has Cascade + and Thomas Dudley Ltd or Cronex (Cronex is a brand name of Cronexrabo which is a subsidiary company of Thomas Dudley Limited) moulded into it.
Installation Requirements:
R001 R556
Model:
Dudley Cascade Plus
Manufacturer:
Thomas Dudley Ltd
Company Name
Thomas Dudley Ltd
Address
Dauntless Works PO Box 28 New Birmingham Road
Postcode
DY1 4SN
Country
Dudley
Phone
Tel: 0121 557 5411 Fax: 0121 557 5345

View All Listings by this Company

Print This Approval


#1911030

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating pressure 8.0 bar. For cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
1911030
Expiry date:
30/11/2024
Size:
2” BSP (M)
Marking:
UNITOP, cUPC, CE, WRAS and A31 on body.
Installation Requirements:
R001
Model:
A31
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 19

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.