Aquaflow range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207382

Expiry date:

31/07/2027

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

Aquaflow, PN & size on nut.

Installation Requirements:

R001

Model:

324A*****Q TEE REDUCING-AQUAFLOW 320******Q ADAPTOR MALE-AQUAFLOW 320A*****Q ADAPTOR FEMALE-AQUAFLOW 320B*****Q END PLUG-AQUAFLOW 321******Q COUPLING-AQUAFLOW 321A*****Q REDUCING COUPLING-AQUAFLOW 322******Q ELBOW-AQUAFLOW 322A*****Q ELBOW THREADED MALE-AQUAFLOW 322B*****Q ELBOW THREADED FEMALE-AQUAFLOW 322C*****Q ELBOW POP-UP-AQUAFLOW 322D*****Q WALL ELBOW-AQUAFLOW 323******Q TEE THREADED FEMALE-AQUAFLOW 323A*****Q TEE THREADED MALE-AQUAFLOW 323C*****Q CROSS TEE-AQUAFLOW 324******Q TEE 90°-AQUAFLOW 324B*****Q TEE INCREASING-AQUAFLOW 320C*****Q FLANGED ADAPTOR -AQUAFLOW 320D*****Q FLANGED ADAPTOR-AQUAFLOW 321B*****Q REPAIR COUPLING-AQUAFLOW 321C*****Q CONVERSION REDUCER/UNIVERSAL ADAPTOR-AQUAFLOW 321D***** GLOBAL TRANSITION COUPL. -AQUAFLOW Where XXX-YYY-ZZZ for product family codes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e alter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Factor:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill

Postcode

B11 2NJ

Country

Birmngham

General Email

george.argiropoulos@elysee.com.cy

View All Listings by this Company

Range of ‘Superseal’ and ‘Speedfit’ push-fit fittings with acetal body’s (black or light grey) and NBR ‘O’ rings. For use with John Guest LLDPE tubing (Speedfit port only) and 316 stainless steel tubing manufactured to EN10088 (Superseal push-fit port only). Pipe inserts must be used for the LLDPE tube sizes 3/8” and ½”. Maximum working pressure: See models below. For cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2301017

Expiry date:

31/01/2028

Note:

Only black JG LLDPE tube should be installed with these fittings in areas exposed to light.

Size:

See models.

Marking:

JG LOGO on body. Size on collet.

Installation Requirements:

R001

Model:

SM010802S - 5/16" Superseal OD x 1/4" BSPT (M) STRAIGHT ADAPTOR 16 Bar, SM010812S - 5/16" Superseal OD x 1/4" BSP (M) STRAIGHT ADAPTOR 16.0 Bar, SM0108F4S - 5/16" Superseal OD x 1/4" MFL STRAIGHT ADAPTOR 16.0 Bar, SM410808E - 5/16" Superseal OD x 5/16" Superseal OD STRAIGHT ADAPTOR 16.0 Bar, SM040808S - 5/16" Superseal OD x 5/16" Speedfit OD STRAIGHT CONNECTOR 16.0 Bar, SI041012S - 5/16" Superseal OD x 3/8" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041016S - 5/16" Superseal OD x 1/2" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041210S - 3/8" Superseal OD x 5/16" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041212S - 3/8" Superseal OD x 3/8" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041216S - 3/8" Superseal OD x 1/2" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SM040608E - 6MM Superseal OD x 8MM Speedfit OD STRAIGHT CONNECTOR 16.0 Bar, SM400808S - 5/16" Superseal OD x 5/16" Superseal OD ELBOW CONNECTOR 16.0 Bar, SI401210S - 3/8" Superseal OD x 5/16" Superseal OD ELBOW CONNECTOR 10.0 Bar, SI401212S - 3/8" Superseal OD x 3/8" Superseal OD ELBOW CONNECTOR 10.0 Bar, SI030812S - 1/4" Superseal OD x 3/8" Speedfit OD ELBOW CONNECTOR 10.0 Bar, SM030808S - 5/16" Superseal OD x 5/16" Speedfit OD ELBOW CONNECTOR 16.0 Bar, SI031012S - 5/16" Superseal OD x 3/8" Speedfit OD ELBOWCONNECTOR 10.0 Bar, SI031210S - 3/8" Superseal OD x 5/16" Speedfit OD ELBOWCONNECTOR 10.0 Bar, SI031212S - 3/8" Superseal OD x 3/8" Speedfit OD ELBOW CONNECTOR 10.0 bar, SM420808S - 5/16" Superseal OD x 5/16" Speedfit OD FLOWBEND CONNECTOR 16.0 Bar, SI421012S - 5/16" Superseal OD x 3/8" Speedfit OD FLOW BEND CONNECTOR 10.0 Bar, SI421212S - 3/8" Superseal OD x 3/8" Speedfit OD FLOW BEND CONNECTOR 10.0 Bar, SI270808S - 1/4" Superseal OD x 1/4" ID BARB CONNECTOR 16.0 Bar, SI271008S - 5/16" Superseal OD x 1/4" ID BARB CONNECTOR 16.0 Bar, SI271208S - 3/8" Superseal OD x 1/4" ID BARB CONNECTOR 10.0 Bar, SM120808S - 5/16" Superseal OD x 5/16" Speedfit OD BULKHEAD CONNECTOR 16.0 Bar.

Manufacturer:

Reliance Worldwide Corporation UK Ltd

Company Name

Reliance Worldwide Corporation UK Ltd

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

View All Listings by this Company

Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303335

Expiry date:

31/03/2028

Size:

see model

Marking:

YS, size on body

Installation Requirements:

R001

Model:

STRAIGHT COUPLING SM3270 316L001515 – 15 mm SM3270 316L001818 – 18mm SM3270 316L002222 – 22mm SM3270 316L002828 – 28mm SM3270 316L003535 – 35mm SM3270 316L004242 – 42mm SM3270 316L005454 – 54mm SM3270 316L006666 – 66.7mm SM3270 316L007676 – 76.1mm SM3270 316L008888 – 88.9mm SM3270 316L00X8X8 – 108mm SLIP COUPLING SM3274 316L001515 – 15mm SM3274 316L001818 – 18mm SM3274 316L002222 – 22mm SM3274 316L002828 – 28mm SM3274 316L003535 – 35mm SM3274 316L004242 – 42mm SM3274 316L005454 – 54mm SM3274 316L006666 – 66.7mm SM3274 316L007676 – 76.1mm SM3274 316L008888 – 88.9mm SM3274 316L00X8X8 – 108mm 90 DEGREE EQUAL ELBOW SM3090 316L001515 – 15mm SM3090 316L001818 – 18mm SM3090 316L002222 – 22mm SM3090 316L002828 – 28mm SM3090 316L003535 – 35mm SM3090 316L004242 – 42mm SM3090 316L005454 – 54mm SM3090 316L006666 – 66.7mm SM3090 316L007676 – 76.1mm SM3090 316L008888 – 88.9mm SM3090 316L00X8X8 – 108mm 90 DEGREE STREET ELBOW SM3092 316L001515 – 15mm SM3092 316L001818 – 18mm SM3092 316L002222 – 22mm SM3092 316L002828 – 28mm SM3092 316L003535 – 35mm SM3092 316L004242 – 42mm SM3092 316L005454 – 54mm SM3092 316L006666 – 66.7mm SM3092 316L007676 – 76.1mm SM3092 316L008888 – 88.9mm SM3092 316L00X8X8 – 108mm 45 DEGREE EQUAL ELBOW SM3041 316L001515 – 15mm SM3041 316L001818 – 18mm SM3041 316L002222 – 22mm SM3041 316L002828 – 28mm SM3041 316L003535 – 35mm SM3041 316L004242 – 42mm SM3041 316L005454 – 54mm SM3041 316L006666 – 66.7mm SM3041 316L007676 – 76.1mm SM3041 316L008888 – 88.9mm SM3041 316L00X8X8 – 108mm 45 DEGREE STREET ELBOW SM3040 316L001515 – 15mm SM3040 316L001818 – 18mm SM3040 316L002222 – 22mm SM3040 316L002828 – 28mm SM3040 316L003535 – 35mm SM3040 316L004242 – 42mm SM3040 316L005454 – 54mm SM3040 316L006666 – 66.7mm SM3040 316L007676 – 76.1mm SM3040 316L008888 – 88.9mm SM3040 316L00X8X8 – 108mm EQUAL TEE SM3130 316L151515 – 15mm SM3130 316L181818 – 18mm SM3130 316L222222 – 22mm SM3130 316L282828 – 28mm SM3130 316L353535 – 35mm SM3130 316L424242 – 42mm SM3130 316L545454 – 54mm SM3130 316L666666 – 66.7mm SM3130 316L767676 – 76.1mm SM3130 316L888888 – 88.9mm SM3130 316LX8X8X8 – 108mm REDUCING TEE SM3131 316L181815 – 18 x 18 x 15mm SM3131 316L222215 – 22 x 22 x 15mm SM3131 316L222218 – 22 x 22 x 18mm SM3131 316L282815 – 28 x 28 x 15mm SM3131 316L282818 – 28 x 28 x 18mm SM3131 316L282822 – 28 x 28 x 22mm SM3131 316L353515 – 35 x 35 x 15mm SM3131 316L353518 – 35 x 35 x 18mm SM3131 316L353522 – 35 x 35 x 22mm SM3131 316L353528 – 35 x 35 x 28mm SM3131 316L424215 – 42 x 42 x 15mm SM3131 316L424218 – 42 x 42 x 18mm SM3131 316L424222 – 42 x 42 x 22mm SM3131 316L424228 – 42 x 42 x 28mm SM3131 316L424235 – 42 x 42 x 35mm SM3131 316L545415 – 54 x 54 x 15mm SM3131 316L545418 – 54 x 54 x 18mm SM3131 316L545422 – 54 x 54 x 22mm SM3131 316L545428 – 54 x 54 x 28mm SM3131 316L545435 – 54 x 54 x 35mm SM3131 316L545442 – 54 x 54 x 42mm SM3131 316L666628 – 66.7 x 66.7 x 28mm SM3131 316L666635 – 66.7 x 66.7 x 35mm SM3131 316L666642 – 66.7 x 66.7 x 42mm SM3131 316L666654 – 66.7 x 66.7 x 54mm SM3131 316L767622 – 76.1 x 76.1 x 22mm SM3131 316L767628 – 76.1 x 76.1 x 28mm SM3131 316L767635 – 76.1 x 76.1 x 35mm SM3131 316L767642 – 76.1 x 76.1 x 42mm SM3131 316L767654 – 76.1 x 76.1 x 54mm SM3131 316L888822 – 88.9 x 88.9 x 22mm SM3131 316L888828 – 88.9 x 88.9 x 28mm SM3131 316L888835 – 88.9 x 88.9 x 35mm SM3131 316L888842 – 88.9 x 88.9 x 42mm SM3131 316L888854 – 88.9 x 88.9 x 54mm SM3131 316L888876 – 88.9 x 88.9 x 76.1mm SM3131 316LX8X822 – 108 x 108 x 22mm SM3131 316LX8X828 – 108 x 108 x 28mm SM3131 316LX8X835 – 108 x 108 x 35mm SM3131 316LX8X842 – 108 x 108 x 42mm SM3131 316LX8X854 – 108 x 108 x 54mm SM3131 316LX8X876 – 108 x 108 x 76.1mm SM3131 316LX8X888 – 108 x 108 x 88.9mm STOP END SM3301 316L000015 – 15mm SM3301 316L000018 – 18mm SM3301 316L000022 – 22mm SM3301 316L000028 – 28mm SM3301 316L000035 – 35mm SM3301 316L000042 – 42mm SM3301 316L000054 – 54mm SM3301 316L000066 – 66.7mm SM3301 316L000076 – 76.1mm SM3301 316L000088 – 88.9mm SM3301 316L0000X8 – 108mm FULL CROSSOVER SM3085 316L001515 – 15mm SM3085 316L001818 – 18mm SM3085 316L002222 – 22mm SM3085 316L002828 – 28mm PART CORSSOVER SM3086 316L001515 – 15mm SM3086 316L001818 – 18mm SM3086 316L002222 – 22mm SM3086 316L002828 – 28mm FLANGE SM3325 316L000015 – 15mm SM3325 316L000018 – 18mm SM3325 316L000022 – 22mm SM3325 316L000028 – 28mm SM3325 316L000035 – 35mm SM3325 316L000042 – 42mm SM3325 316L000054 – 54mm SM3325 316L000066 – 66.7mm SM3325 316L000076 – 76.1mm SM3325 316L000088 – 88.9mm SM3325 316L0000X8 – 108mm REDUCED COUPLING SM3240 316L001815 – 18 x 15mm SM3240 316L002215 – 22 x 15mm SM3240 316L002218 – 22 x 18mm SM3240 316L002815 – 28 x 15mm SM3240 316L002818 – 28 x 18mm SM3240 316L002822 – 28 x 22mm SM3240 316L003515 – 35 x 15mm SM3240 316L003518 – 35 x 18mm SM3240 316L003522 – 35 x 22mm SM3240 316L003528 – 35 x 28mm SM3240 316L004215 – 42 x 15mm SM3240 316L004218 – 42 x 18mm SM3240 316L004222 – 42 x 22mm SM3240 316L004228 – 42 x 28mm SM3240 316L004235 – 42 x 35mm SM3240 316L005415 – 54 x 15mm SM3240 316L005418 – 54 x 18mm SM3240 316L005422 – 54 x 22mm SM3240 316L005428 – 54 x 28mm SM3240 316L005435 – 54 x 35mm SM3240 316L005442 – 54 x 42mm SM3240 316L006628 – 66.7 x 28mm SM3240 316L006635 – 66.7 x 35mm SM3240 316L006642 – 66.7 x 42mm SM3240 316L006654 – 66.7 x 54mm SM3240 316L007642 – 76.1 x 42mm SM3240 316L007654 – 76.1 x 54mm SM3240 316L008854 – 88.9 x 54mm SM3240 316L008876 – 88.9 x 76.1mm SM3240 316L00X854 – 108 X 54mm SM3240 316L00X876 – 108 X 76.1mm SM3240 316L00X888 - 108 X 88.9mm FITTING REDUCER SM3243 316L001815 – 18 x 15mm SM3243 316L002215 – 22 x 15mm SM3243 316L002218 – 22 x 18mm SM3243 316L002815 – 28 x 15mm SM3243 316L002818 – 28 x 18mm SM3243 316L002822 – 28 x 22mm SM3243 316L003515 – 35 x 15mm SM3243 316L003518 – 35 x 18mm SM3243 316L003522 – 35 x 22mm SM3243 316L003528 – 35 x 28mm SM3243 316L004215 – 42 x 15mm SM3243 316L004218 – 42 x 18mm SM3243 316L004222 – 42 x 22mm SM3243 316L004228 – 42 x 28mm SM3243 316L004235 – 42 x 35mm SM3243 316L005415 – 54 x 15mm SM3243 316L005418 – 54 x 18mm SM3243 316L005422 – 54 x 22mm SM3243 316L005428 – 54 x 28mm SM3243 316L005435 – 54 x 35mm SM3243 316L005442 – 54 x 42mm SM3243 316L006628 – 66.7 x 28mm SM3243 316L006635 – 66.7 x 35mm SM3243 316L006642 – 66.7 x 42mm SM3243 316L006654 – 66.7 x 54mm SM3243 316L007642 – 76.1 x 42mm SM3243 316L007654 – 76.1 x 54mm SM3243 316L008854 – 88.9 x 54mm SM3243 316L008876 – 88.9 x 76.1mm SM3243 316L00X854 – 108 x 54mm SM3243 316L00X876 – 108 x 76.1mm SM3243 316L00X888 – 108 x 88.9mm C X MI COUPLING SM3253 316L015M12 – 15 x ½” BSP (M) SM3253 316L015M34 – 15 x ¾” BSP (M) SM3253 316L018M12 – 18 x ½” BSP (M) SM3253 316L018M34 – 18 x ¾” BSP (M) SM3253 316L022M12 – 22 x ½” BSP (M) SM3253 316L022M34 – 22 x ¾” BSP (M) SM3253 316L022M10 – 22 x 1” BSP (M) SM3253 316L028M34 – 28 x ¾” BSP (M) SM3253 316L028M10 – 28 x 1” BSP (M) SM3253 316L035M10 – 35 x 1” BSP (M) SM3253 316L035MA4 – 35 x 1 ¼” BSP (M) SM3253 316L042MA4 – 42 x 1 ¼” BSP (M) SM3253 316L042MA2 – 42 x 1 ½” BSP (M) SM3253 316L054MA2 – 54 x 1 ½” BSP (M) SM3253 316L054M20 – 54 x 2” BSP (M) SM3253 316L066M20 – 66.7 x 2” BSP (M) SM3253 316L076MA2 – 76.1 x 2 ½” BSP (M) SM3253 316L088M30 – 88.9 x 3” BSP (M) C X FI COUPLING SM3250 316L015F12 – 15 x ½” BSP (F) SM3250 316L015F34 – 15 x ¾” BSP (F) SM3250 316L018F12 – 18 x ½” BSP (F) SM3250 316L018F34 – 18 x ¾” BSP (F) SM3250 316L022F12 – 22 x ½” BSP (F) SM3250 316L022F34 – 22 x ¾” BSP (F) SM3250 316L022F10 – 22 x 1” BSP (F) SM3250 316L028F34 – 28 x ¾” BSP (F) SM3250 316L028F10 – 28 x 1” BSP (F) SM3250 316L035F10 – 35 x 1” BSP (F) SM3250 316L035FA4 – 35 x 1 ¼” BSP (F) SM3250 316L042FA4 – 42 x 1 ¼” BSP (F) SM3250 316L042FA2 – 42 x 1 ½” BSP (F) SM3250 316L054FA2 – 54 x 1 ½” BSP (F) SM3250 316L054F20 – 54 x 2” BSP (F) SM3250 316L066F20 – 66.7 x 2” BSP (F) SM3250 316L076FA2 – 76.1 x 2 ½” BSP (F) SM3250 316L088F30 – 88.9 x 3” BSP (F) SWIVEL COUPLING SM3260 316L015F12 – 15 x ½” BSP Captive nut SM3260 316L018F12 – 18 x ½” BSP Captive nut SM3260 316L022F34 – 22 x ¾” BSP Captive nut SM3260 316L028F10 – 28 x 1” BSP Captive nut SM3260 316L035FA4 – 35 x 1 ¼” BSP Captive nut SM3260 316L042FA2 – 42 x 1 ½” BSP Captive nut SM3260 316L054F20 – 54 x 2” BSP Captive nut C X C X MI TEE SM3230 316L215M12 – 15 x 15 x ½” BSP (M) SM3230 316L218M12 – 18 x 18 x ½” BSP (M) SM3230 316L218M34 – 18 x 18 x ¾” BSP (M) SM3230 316L222M12 – 22 x 22 x ½” BSP (M) SM3230 316L222M34 – 22 x 22 x ¾” BSP (M) SM3230 316L228M12 – 28 x 28 x ½” BSP (M) SM3230 316L228M34 – 28 x 28 x ¾” BSP (M) SM3230 316L228M10 – 28 x 28 x 1” BSP (M) SM3230 316L235M12 – 35 x 35 x ½” BSP (M) SM3230 316L235M34 – 35 x 35 x ¾” BSP (M) SM3230 316L235MA4 – 35 x 35 x 1 ¼” BSP (M) SM3230 316L242M34 – 42 x 42 x ¾” BSP (M) SM3230 316L242MA4 – 42 x 42 x 1 ¼” BSP (M) SM3230 316L242MA2 – 42 x 42 x 1 ½” BSP (M) SM3230 316L254M34 – 54 x 54 x ¾” BSP (M) SM3230 316L254MA2 – 54 x 54 x 1 ½” SM3230 316L254M20 – 54 x 54 x 2” SM3230 316L266M34 – 66.7 x 66.7 x ¾” SM3230 316L266M20 – 66.7 x 66.7 x 2” C X C X FI TEE SM3231 316L215F12 – 15 x 15 x ½” BSP (F) SM3231 316L218F12 – 18 x 18 x ½” BSP (F) SM3231 316L218F34 – 18 x 18 x ¾” BSP (F) SM3231 316L222F12 – 22 x 22 x ½” BSP (F) SM3231 316L222F34 – 22 x 22 x ¾” BSP (F) SM3231 316L228F12 – 28 x 28 x ½” BSP (F) SM3231 316L228F34 – 28 x 28 x ¾” BSP (F) SM3231 316L228F10 – 28 x 28 x 1” BSP (F) SM3231 316L235F12 – 35 x 35 x ½” BSP (F) SM3231 316L235F34 – 35 x 35 x ¾” BSP (F) SM3231 316L242F12 – 42 x 42 x ½” BSP (F) SM3231 316L242F34 – 42 x 42 x ¾” BSP (F) SM3231 316L254F12 – 54 x 54 x ½” BSP (F) SM3231 316L254F34 – 54 x 54 x ¾” BSP (F) SM3231 316L254F20 – 54 x 54 x 2” BSP (F) SM3231 316L266F34 – 66.7 x 66.7 x ¾” BSP (F) SM3231 316L266F20 – 66.7 x 66.7 x 2” BSP (F) SM3231 316L276F34 – 76.1 x 76.1 x ¾” BSP (F) SM3231 316L276F20 – 76.1 x 76.1 x 2” BSP (F) SM3231 316L288F34 – 88.9 x 88.9 x ¾” BSP (F) SM3231 316L288F20 – 88.9 x 88.9 x 2” BSP (F) SM3231 316L2X8F34 – 108 x 108 x ¾” BSP (F) SM3231 316L2X8F20 – 108 x 108 x 2” BSP (F) C X MI 90D ELBOW SM3190 316L015M12 – 15 x ½” BSP (M) SM3190 316L015M34 – 15 x ¾” BSP (M) SM3190 316L018M12 – 18 x ½” BSP (M) SM3190 316L022M12 – 22 x ½” BSP (M) SM3190 316L022M34 – 22 x ¾” BSP (M) SM3190 316L022M10 – 22 x 1” BSP (M) SM3190 316L028M34 – 28 x ¾” BSP (M) SM3190 316L028M10 – 28 x 1” BSP (M) SM3190 316L035M10 – 35 x 1” BSP (M) SM3190 316L035MA4 – 35 x 1 ¼” BSP (M) SM3190 316L042MA2 – 42 x 1 ½” BSP (M) SM3190 316L054MA2 – 54 x 1 ½” BSP (M) SM3190 316L054M20 – 54 x 2” BSP (M) SM3190 316L066M20 – 66.7 x 2” BSP (M) SM3190 316L076MA2 – 76.1 x 76.1 x 2 ½” BSP (M) SM3190 316L088M30 – 88.9 x 88.9 x 3” BSP (M) C X FI 90D ELBOW SM3191 316L015F12 – 15 x ½” BSP (F) SM3191 316L018F12 – 18 x ½” BSP (F) SM3191 316L022F34 – 22 x ¾” BSP (F) SM3191 316L028F10 – 28 x 1” BSP (F) SM3191 316L035FA4 – 35 x 1 ¼” BSP (F) SM3191 316L042FA2 – 42 x 1 ½” BSP (F) SM3191 316L054F20 – 54 x 2” BSP (F) SM3191 316L066F20 – 66.7 x 2” BSP (F) C X MI 90D SHORT ELBOW SM3290 316L015M12 – 15 x ½” BSP (M) SM3290 316L018M12 – 18 x ½” BSP (M) SM3290 316L022M34 – 22 x ¾” BSP (M) SM3290 316L028M10 – 28 x 1” BSP (M) SM3290 316L035MA4 – 35 x 1 ¼” BSP (M) SM3290 316L042MA2 – 42 x 1 ½” BSP (M) SM3290 316L054M20 – 54 x 2” BSP (M) C X FI 90D SHORT ELBOW SM3291 316L015F12 – 15 x ½” BSP (F) SM3291 316L018F12 – 18 x ½” BSP (F) SM3291 316L022F12 – 22 x ½” BSP (F) SM3291 316L022F34 – 22 x ¾” BSP (F) SM3291 316L028F10 – 28 x 1” BSP (F) SM3291 316L035FA4 – 35 x 1 ¼” BSP (F) CXFI 90D WALLPLATE ELBOW SM3390 316L015F12 – 15 x ½” BSP (F) SM3390 316L018F12 – 18 x ½” BSP (F) SM3390 316L022F34 – 22 x ¾” BSP (F) SM3390 316L028F10 – 28 x 1” BSP (F) SM3390 316L035FA4 – 35 x 1 ¼” BSP (F)

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Expiry date:

31/03/2028

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305343

Expiry date:

31/05/2028

Size:

see model

Marking:

EN1254-2 & size on nut. HonSon logo (ISI) on fitting body

Installation Requirements:

R001

Model:

HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Manufacturer:

Wenling Honson Brassware Co Ltd

Company Name

Wenling Honson Brassware Co Ltd

Address

Yingtian Industrial Zone, Cheng-nan Town, Wenling City

Country

Zhejiang Province,

View All Listings by this Company

Range of “Effast” ABS fittings for use with ABS pipe complying with BS EN 5391-2006. Maximum working pressure: 15 Bar. Maximum operating temperature: 23°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2306055

Expiry date:

30/06/2028

Size:

20, 25, 32, 40, 50, 63, 75, 90 OR 110mm solvent weld (SW) connection (Model codes with XXXX is replaced with 0200 for 20mm, or 1100 for 110mm SW etc.) ½”, ¾”, 1”, 1.1/4”, 1.1/2”, 2”, 3” or 4” BSP (M) or (F) connections. (Model codes with a Y on the end is replaced with B for ½”, C for ¾”, D for 1”, E for 1.1/4”, F for 1.1/2”, G for 2”, H for 3” and I for 4” BSP).

Marking:

Effast and size on body.

Installation Requirements:

R001

Model:

RAAGOAXXXX - Elbow 90° BS (20-110 SW), RAAGYAXXXX - Elbow 45° BS (20-110 SW), RAAMAAXXXX - Socket BS (20-110 SW), RAATIAXXXX - tee 90° BS (20-110 SW), RAACAAXXXX - Cap BS (25-110 SW), RAACUAXXXX - Bend 90° (25-110 SW,) RAABOAXXXX - Union BS (20-110 SW), RAAQRAXXXX - Serrated Face Stub Flange (32-110 SW), RAAFNAXXXX - Fixed Flange ISO (20-110 SW), RAAFFAXXXX - Fixed Flange BS (50-110 SW), RAAFCAXXXX - Blanking Flange ISO (63-110 SW), RAARCAXXXB - Reducing Bush BS (25-32 SW), RAARCAXXXC - Reducing Bush BS (32 SW), RAARCAXXXD - Reducing Bush BS (40-63 SW), RAARCAXXXE - Reducing Bush BS (50-63 SW), RAARCAXXXF - Reducing Bush BS (63-90 SW), RAARCAXXXG - Reducing Bush BS (75-110 SW), RAARCAXXXH - Reducing Bush BS (90 SW), RAARCAXXXI - Reducing Bush BS (110 SW), RAARCAXXXL - Reducing Bush BS (140-160 SW), RCAGOCXXXY - Elbow 90° BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCATICXXXY - Tee 90° BS/BSPP (20-110 SW (x2) x ½” to 4” BSP (F)), RCAMACXXXY - Socket BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCAAFCXXXY - Female Adaptor BS/BSPP (20-63 SW x ½” to 2” BSP (F)), RCAAMCXXXY - Male Adaptor BS/PSBB (20-110 SW x ½” to 4” BSP (M)), RCARCCXXXY - Reducing Bush BS/BSPP (20-32 SW x ½” to 1” BSP (F)),

Manufacturer:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Localita Pianmercato, 5c/d/h 16044 Cicagna (GE)

Country

Italy

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings (except for 149ENM, 303ENM and 304ENM models) for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1909131

Expiry date:

30/09/2024

Size:

12mm - 108mm.

Marking:

PFP, WRAS and size on body.

Installation Requirements:

R001

Model:

30076150 Copper Press Straight Coupling PxP 15 mm 30076151 Copper Press Straight Coupling PxP 22 mm 30076152 Copper Press Straight Coupling PxP 28 mm 30076153 Copper Press Straight Coupling PxP 35 mm 30076154 Copper Press Straight Coupling PxP 42 mm 30076155 Copper Press Straight Coupling PxP 54 mm 30076156 Copper Press Reducing Coupling PxP 22×15 mm 30076157 Copper Press Reducing Coupling PxP 28×15 mm 30076158 Copper Press Reducing Coupling PxP 28×22 mm 30076159 Copper Press Reducing Coupling PxP 35×22 mm 30076160 Copper Press Reducing Coupling PxP 35×28 mm 30076161 Copper Press Reducing Coupling PxP 42×28 mm 30076162 Copper Press Reducing Coupling PxP 42×35 mm 30076163 Copper Press Reducing Coupling PxP 54×28 mm 30076164 Copper Press Reducing Coupling PxP 54×35 mm 30076165 Copper Press Reducing Coupling PxP 54×42 mm 30076211 Copper Press Fitting Reducer FTGxP 22×15 mm 30076212 Copper Press Fitting Reducer FTGxP 28×15 mm 30076213 Copper Press Fitting Reducer FTGxP 28×22 mm 30076214 Copper Press Fitting Reducer FTGxP 35×22 mm 30076215 Copper Press Fitting Reducer FTGxP 35×28 mm 30076216 Copper Press Fitting Reducer FTGxP 42×22 mm 30076217 Copper Press Fitting Reducer FTGxP 42×28 mm 30076218 Copper Press Fitting Reducer FTGxP 42×35 mm 30076219 Copper Press Fitting Reducer FTGxP 54×35 mm 30076220 Copper Press Fitting Reducer FTGxP 54×42 mm 30076172 Copper Press Elbow - 90° PxP 15 mm 30076173 Copper Press Elbow - 90° PxP 22 mm 30076174 Copper Press Elbow - 90° PxP 28 mm 30076175 Copper Press Elbow - 90° PxP 35 mm 30076176 Copper Press Elbow - 90° PxP 42 mm 30076177 Copper Press Elbow - 90° PxP 54 mm 30076179 Copper Press Elbow - 90° (Male / Female) FTGxP 15 mm 30076180 Copper Press Elbow - 90° (Male / Female) FTGxP 22 mm 30076181 Copper Press Elbow - 90° (Male / Female) FTGxP 28 mm 30076182 Copper Press Elbow - 90° (Male / Female) FTGxP 35 mm 30076183 Copper Press Elbow - 90° (Male / Female) FTGxP 42 mm 30076185 Copper Press Elbow - 45° PxP 15 mm 30076186 Copper Press Elbow - 45° PxP 22 mm 30076187 Copper Press Elbow - 45° PxP 28 mm 30076188 Copper Press Elbow - 45° PxP 35 mm 30076189 Copper Press Elbow - 45° PxP 42 mm 30076190 Copper Press Elbow - 45° PxP 54 mm 30076191 Copper Press Elbow - 45° (Male / Female) FTGxP 15 mm 30076192 Copper Press Elbow - 45° (Male / Female) FTGxP 22 mm 30076193 Copper Press Elbow - 45° (Male / Female) FTGxP 28 mm 30076194 Copper Press Elbow - 45° (Male / Female) FTGxP 35 mm 30076195 Copper Press Elbow - 45° (Male / Female) FTGxP 42 mm 30076196 Copper Press Elbow - 45° (Male / Female) FTGxP 54 mm 30076166 Copper Press Slip Extended Coupling PxP 15 mm 30076167 Copper Press Slip Extended Coupling PxP 22 mm 30076168 Copper Press Slip Extended Coupling PxP 28 mm 30076169 Copper Press Slip Extended Coupling PxP 35 mm 30076170 Copper Press Slip Extended Coupling PxP 42 mm 30076171 Copper Press Slip Extended Coupling PxP 54 mm 30076239 Copper Press Equal Tee PxPxP 15 mm 30076240 Copper Press Equal Tee PxPxP 22 mm 30076241 Copper Press Equal Tee PxPxP 28 mm 30076242 Copper Press Equal Tee PxPxP 35 mm 30076243 Copper Press Equal Tee PxPxP 42 mm 30076244 Copper Press Equal Tee PxPxP 54 mm 30076225 Copper Press Unequal Tee PxPxP 22×22×15 mm 30076226 Copper Press Unequal Tee PxPxP 28×28×15 mm 30076227 Copper Press Unequal Tee PxPxP 28×28×22 mm 30076228 Copper Press Unequal Tee PxPxP 35×35×15 mm 30076229 Copper Press Unequal Tee PxPxP 35×35×22 mm 30076230 Copper Press Unequal Tee PxPxP 35×35×28 mm 30076231 Copper Press Unequal Tee PxPxP 42×42×15 mm 30076232 Copper Press Unequal Tee PxPxP 42×42×22 mm 30076233 Copper Press Unequal Tee PxPxP 42×42×28 mm 30076234 Copper Press Unequal Tee PxPxP 42×42×35 mm 30076235 Copper Press Unequal Tee PxPxP 54×54×22 mm 30076236 Copper Press Unequal Tee PxPxP 54×54×28 mm 30076237 Copper Press Unequal Tee PxPxP 54×54×35 mm 30076238 Copper Press Unequal Tee PxPxP 54×54×42 mm 30076221 Copper Press Unequal Tee PxPxP 22×15×15 mm 30076222 Copper Press Unequal Tee PxPxP 22×15×22 mm 30076223 Copper Press Unequal Tee PxPxP 28×22×22 mm 30076224 Copper Press Unequal Tee PxPxP 28×22×28 mm 30076178 Copper Press Reducing Elbow - 90° PxP 22×15 mm 30076271 Copper Press End Cap P 15 mm 30076272 Copper Press End Cap P 22 mm 30076273 Copper Press End Cap P 28 mm 30076274 Copper Press End Cap P 35 mm 30076275 Copper Press End Cap P 42 mm 30076276 Copper Press End Cap P 54 mm 30076269 Copper Press Full crossover P x P 15 mm 30076270 Copper Press Full crossover P x P 22 mm 30076267 Copper Press Partial crossover FTGxP 15 mm 30076268 Copper Press Partial crossover FTGxP 22 mm 30076256 Copper Press Adapter - male thread P x R 15×1/2" 30076257 Copper Press Adapter - male thread P x R 15×3/4" 30076258 Copper Press Adapter - male thread P x R 22×1/2" 30076259 Copper Press Adapter - male thread P x R 22×3/4" 30076260 Copper Press Adapter - male thread P x R 22×1" 30076261 Copper Press Adapter - male thread P x R 28×3/4" 30076262 Copper Press Adapter - male thread P x R 28×1" 30076263 Copper Press Adapter - male thread P x R 35×1" 30076264 Copper Press Adapter - male thread P x R 35×1-1/4" 30076265 Copper Press Adapter - male thread P x R 42×1-1/2" 30076266 Copper Press Adapter - male thread P x R 54×2" 30076245 Copper Press Adapter - Female thread P x Rp 15×1/2" 30076246 Copper Press Adapter - Female thread P x Rp 15×3/4" 30076247 Copper Press Adapter - Female thread P x Rp 22×1/2" 30076248 Copper Press Adapter - Female thread P x Rp 22×3/4" 30076249 Copper Press Adapter - Female thread P x Rp 22×1" 30076250 Copper Press Adapter - Female thread P x Rp 28×3/4" 30076251 Copper Press Adapter - Female thread P x Rp 28×1" 30076253 Copper Press Adapter - Female thread P x Rp 35×1-1/4" 30076254 Copper Press Adapter - Female thread P x Rp 42×1-1/2" 30076255 Copper Press Adapter - Female thread P x Rp 54×2" 30076203 Copper Press Adapter Tee - female thread on branch P x P x Rp 15×15×1/2" 30076204 Copper Press Adapter Tee - female thread on branch P x P x Rp 22×22×1/2" 30076205 Copper Press Adapter Tee - female thread on branch P x P x Rp 22×22×3/4" 30076206 Copper Press Adapter Tee - female thread on branch P x P x Rp 28×28×1/2" 30076207 Copper Press Adapter Tee - female thread on branch P x P x Rp 28×28×3/4" 30076208 Copper Press Adapter Tee - female thread on branch P x P x Rp 35×35×1/2" 30076209 Copper Press Adapter Tee - female thread on branch P x P x Rp 42×42×1/2" 30076210 Copper Press Adapter Tee - female thread on branch P x P x Rp 54×54×1/2" 30076200 Copper Press Adapter 90° Elbow - male thread P x R 15×1/2" 30076201 Copper Press Adapter 90° Elbow - male thread P x R 22×3/4" 30076202 Copper Press Adapter 90° Elbow - male thread P x R 28×1" 30076197 Copper Press Adapter 90° Elbow - female thread P x Rp 15×1/2" 30076198 Copper Press Adapter 90° Elbow - female thread P x Rp 22×3/4" 30076199 Copper Press Adapter 90° Elbow - female thread P x Rp 28×1"

Factor:

Primaflow F & P

Company Name

Primaflow F & P

Address

177 Walsall Rd, Perry Barr, Birmingham

Postcode

B42 1BP

Country

United Kingdom

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) and PEX pipe (manufactured to BS7291-3). Maximum working pressures and operating temperatures: 12.5 @ 20°C, and 3.0 bar @ 92ºC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307024

Expiry date:

31/07/2028

Size:

See model.

Marking:

John Guest logo (“JG”) (brand of Reliance Worldwide Corporation (UK) Ltd.) and CR on body.

Installation Requirements:

R001

Model:

Straight Adaptors: MW011504N: 15mm x ½” BSPT (M), MW012206N: 22mm x ¾” BSPT (M), MW012808N: 28mm x 1” BSPT (M), MW012818N: 28mm x 1” BSP (M). Male Couplers: 10MC(1/2): 10mm x ½” BSP (M), 15MC(1/2): 15mm x ½” BSP (M), 15MC(1/2)P: 15mm x ½” BSP (M), 22MC(3/4): 22mm x ¾” BSP (M), 22MC(3/4)P: 22mm x ¾” BSP (M). Female Adaptors: MW451514N: 15mm x ½” BSP (F), MW452216N: 22mm x ¾” BSP (F), 22CFA: 22mm x 1” BSP (F), 22CFAP: 22mm x 1” BSP (F). Back Plate Elbows: 15WB: 15mm x ½” BSP (F), 15WBP: 15mm x ½” BSP (F), 15WB2: 15mm x ½” BSP (F), 22WB: 22mm x ¾” BSP (F). Stem Adaptors: MW051504N: 15mm x ½” BSPT (M), MW052206N: 22mm x ¾” BSPT (M), MW052818N: 28mm x 1" BSP (M), MW501514N: 15mm x ½” BSP (F), MW502216N: 22mm x ¾” BSP (F). Male Adaptors: 22CMA: 22mm x 1” BSP (M), 22CMAP: 22mm x 1” BSP (M).

Factor:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company