Range of R-154 stainless steel pressed collars incorporating stainless steel bodies and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 is 25.0 bar. Maximum working pressure for size DN200 is 16.0 bar. Maximum operating temperature 99°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1907036

Expiry date:

31/07/2024

Size:

DN 40 to DN 200

Marking:

Model, NORDS, size, material grading and pressure rating on fitting body

Installation Requirements:

R001

Model:

FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.

Manufacturer:

Nords International AB

Company Name

Nords International AB

Address

Prostgaardsvagen 2 SE 655 60 MOLKOLM Sweden

View All Listings by this Company

Range of metric black, white or grey DMFit plastic pushfit fittings with EPDM ‘O’-rings for use with metric PEX barrier pipe manufactured to BS7291-2. Supplied with grey pipe inserts. Maximum operating parameters: 12.0 bar @cold water use only and 7.0 bar @ 65°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1907050

Expiry date:

31/07/2024

Note:

R008 applies to the white fittings only. The pipe inserts must be used when installing this system to maintain the validity of the approval

Size:

10, 15 & 22mm.

Marking:

DM and size on the fittings

Installation Requirements:

R001 R008

Model:

AFWC2210M: 22mm tube x 10mm tube, AMC1004M: 10mm tube x ¼” BSPT, AMC1006M: 10mm tube x ⅜” BSPT, AMC1007M: 10mm tube x ½” BSPT, AMC1506M: 15mm tube x ⅜” BSPT, AMC1507M: 15mm tube x ½” BSPT, AMC2209M: 22mm tube x ¾” BSPT, AEU1010M: 10mm tube x 10mm tube, AEU1515M: 15mm tube x 15mm tube, AEU2215M: 22mm tube x 15mm tube, AEU2222M: 22mm tube x 22mm tube, AME1004M: 10mm tube x ¼” BSPT, AME1006M: 10mm tube x ⅜” BSPT, AME1506M: 15mm tube x ⅜” BSPT, AME1507M: 15mm tube x ½” BSPT, AMES1004M: 10mm tube x ¼” BSPT, AMES1006M: 10mm tube x ⅜” BSPT, ARD1015M: 10mm tube x 15mm stem, ARD1522M: 15mm tube x 22mm stem, ATEU1010M: 10mm tube x 10mm stem, ATEU1515M: 15mm tube x 15mm tube, SATEU6766B: 15mm tube x 15mm tube (Long), ATEU2222M: 22mm tube x 22mm tube, AFA1004M: 10mm x ¼” BSPT, AFA1507M: 15mm x ½” BSPT, AFA1509M: 15mm x ¾” BSPT, AFA2209M: 22mm x ¾” BSPT, AFAUN101/2VM: 10mm x 1/2-16 UN, AMRS1004M: 10mm tube x ¼” BSPT, AMRS1006M: 10mm tube x ⅜” BSPT, AMRS1007M: 10mm tube x ½” BSPT, AMTS1004M: 10mm tube x ¼” BSPT, AMTS1006M: 10mm tube x ⅜” BSPT, AMTS1007M: 10mm tube x ½” BSPT, ASA1004M: 10mm stem x ¼” BSPT, ASA1006M: 10mm stem x ⅜” BSPT, ASA1007M: 10mm stem x ½” BSPT, ACR1010M: 10mm tube, ATU101010M: 10mm tube, ATU151010M: 15mm run x 10mm run x 10mm branch, ATU151510M: 15mm run x 15mm run x 10mm branch, ATU151515M: 15mm tube, ATU151522M: 15mm run x 15mm run x 22mm branch, ATU221515M: 22mm run x 15mm run x 15mm branch, ATU222210M: 22mm run x 22mm run x 10mm branch, ATU222215M: 22mm run x 22mm run x 15mm branch, ATU221522M: 22mm run x 15mm run x 22mm branch, ATU222222M: 22mm tube, AUB1010M: 10mm tube, AUB1515M: 15mm tube, AUB2222M: 22mm tube, AUC1010M: 10mm tube x 10mm tube, AUC1510M: 15mm tube x 10mm tube, AUC1515M: 15mm tube x 15mm tube, AUC2215M: 22mm tube x 15mm tube, AUC2222M: 22mm tube x 22mm tube, ATWD1010M: 10mm in & out, ATWD1515M: 15mm in & out, ATES10M: 10mm tube, ATES15M: 15mm tube, ATES22M: 22mm tube, APL10M: 10mm plug, APL15M: 15mm plug, APL22M: 22mm plug, AEL1510M: 10mm stem - 15mm tube, AEL2215M: 15mm stem - 22mm tube, ABU1010M: 10mm tube x 10mm tube, ABBC1507M: 15mm tube x ½" barb, ABBC2207M: 22mm tube x ½" barb, ABBC2209M: 22mm tube x ¾" barb, ABBC1510M: 15mm tube x 10mm barb, ABBC15M09: 15mm tube x 9mm barb, ABBC15M10: 15mm tube x 10mm barb, ABBC15M13: 15mm tube x 13mm barb, AEL15M07: ½" stem x 15mm tube, ASSA15M06: 15mm stem x ⅜" stem, ATBC15M06: 15mm stem x ⅜" barb, ATBC15M07: 15mm stem x ½" barb, ATC15M: 15mm tube, ATC22M: 22mm tube, Grey pipe Inserts: ATS10M: 10mm x 7mm, ATS15M: 15mm x 11.4mm, ATS22M: 22mm x 17.6mm. Models Added July 2020: AMC1002M: 10mm tube x ⅛” BSPT AEU2216M: 22mm tube x 16mm tube ARD1012M: 10mm tube x 12mm stem ARD1518M: 15mm tube x 18mm stem AMCB1004M: 10mm tube x ¼” BSP(P) AMCB1006M: 10mm tube x ⅜” BSP(P) AMCB1007M: 10mm tube x ½” BSP(P) AMCB1507M: 15mm tube x ½” BSP(P) AMCB1509M: 15mm tube x ¾” BSP(P) AMCB2209M: 22mm tube x ¾” BSP(P) AMESB1004M: 10mm tube x ¼” BSP(P) AMESB1006M: 10mm tube x ⅜” BSP(P) AMESB1007M: 10mm tube x ½” BSP(P) ATEU1012M: 10mm tube x 12mm stem AFA1002M: 10mm x 1/8” BSPT AFA2211M: 22mm x 1” BSPT AFAUN121/2VM: 12mm x 1/2-16 UN AFAUF107/16CM: 10mm x 7/16-20UNF-Cone Type AFAU107/16CM: 10mm x 7/16-24 UNS AFAB1006CM: 10mm tube x ⅜” BSP(P) Cone Type AFAB1007CM: 10mm tube x ½” BSP(P) Cone Type AFAB1008CM: 10mm tube x 5/8” BSP(P) Cone Type AFAB1004FM: 10mm tube x ¼” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1209FM: 12mm tube x ¾” BSP(P) Flat Type AFAB1007FM: 10mm tube x ½” BSP(P) Flat Type AFAB1008FM: 10mm tube x 5/8” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1507M: 15mm tube x ½” BSP(P) AFAB1509M: 15mm tube x ¾” BSP(P) AFAB2209M: 22mm tube x ¾” BSP(P) AFAUF107/16VM: 10mm x 7/16-20UNF-V Type AFAUF105/8VM: 10mm x 5/8-18UNF-V Type AMRSB1004M: 10mm tube x ¼” BSP(P) AMRSB1006M: 10mm tube x ⅜” BSP(P) AMRSB1007M: 10mm tube x ½” BSP(P) AMTSB1206M: 12mm tube x ⅜” BSP(P) AMTSB1207M: 12mm tube x ½” BSP(P) AOC1006M: 10mm tube x 6mm tube AMTS1004M: 10mm tube x ¼” BSPT AMTS1006M: 10mm tube x ⅜” BSPT AMTS1007M: 10mm tube x ½” BSPT ASAB1004M: 10mm stem x ¼” BSP(P) ASAB1006M: 10mm stem x ⅜” BSP(P) ASAB1007M: 10mm stem x ½” BSP(P) ASAB1506M: 15mm stem x ⅜” BSP(P) ASAB1507M: 15mm stem x ½" BSP(P) ASAB2207M: 22mm stem x ½" BSP(P) ASAB2209M: 22mm stem x ¾” BSP(P) ACR1212M: 12mm tube ATHWD1210M: 12mm tube x 10mm tube ATU151512M: 15mm run x 15mm run x 12mm branch ATU221616M: 22mm run x 16mm run x 16mm branch ATU222216M: 22mm run x 22mm run x 16mm branch AUC1512M: 15mm tube x 12mm tube AUC2216M: 22mm tube x 16mm tube ATWD1012M: 10mm in & 12mm out AEL1510M: 10mm stem - 15mm tube AEL1610M: 10mm stem - 16mm tube ABU1212M: 12mm tube ABBC1607M: 16mm tube x ½" barb ABBC1201M: 12mm tube x 10mm barb ABBC1610M: 16mm tube x 10mm barb ACM15M06: 15mm x ⅜" x ⅜" manifold APSUC15M07: 15mm power x ½" tube ARD0615M: 15mm stem x ⅜" tube ARD1512M: 15mm stem x 12mm tube AEL16M07: 16mm x ½" tube AEL18M07: ½" stem x 18mm tube ATU15M0606: 15mm tube x ⅜" tube x ⅜" tube ATU1515M06: 15mm tube x 15mm tube x ⅜" tube ATU1616M07: 16mm tube x 16mm tube x ½" tube ATU18M0606: 18mm run x ⅜" run x ⅜" branch AUC12M06: 12mm tube x ⅜" tube AUC15M04: 15mm tube x ¼" tube AUC15M07: 15mm tube x ½" tube ASEU1507M: 15mm tube x 1/2"BSP(P) ASEU1509M: 15mm tube x 3/4"BSP(P) ASUC1507M: 15mm tube x 1/2"BSP(P) ASUC1509M: 15mm tube x 3/4"BSP(P) ASUC2209M: 22mm tube x 3/4"BSP(P) AEFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1509M: 15mm tube x 3/4"BSP(P) ASFCB2209M: 22mm tube x 3/4"BSP(P)

Factor:

The Fluidconnections Co. (UK) Ltd

Company Name

The Fluidconnections Co. (UK) Ltd

Address

Rufford House, Darwin Drive, Sherwood Energy Village

Postcode

NG22 9GW

Country

New Ollerton,

Phone

+44 (0) 1623 836 814

View All Listings by this Company

Manufacturer:

DMT

Company Name

DMT

Address

143B-3L Namdong-Gu Incheon

Country

Korea

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings (except for 149ENM, 303ENM and 304ENM models) for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1909015

Expiry date:

30/09/2024

Size:

12mm - 108mm.

Marking:

Zhuji City Howhi Air Conditioners Made Co., Ltd. Logo and size on body.

Installation Requirements:

R001

Model:

100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8" 301ENM1213AB - 12mm×1/2" 301ENM1510AB - 15mm×3/8" 301ENM1513AB - 15mm×1/2" 301ENM1519AB - 15mm×3/4" 301ENM1813AB - 18mm×1/2" 301ENM1819AB - 18mm×3/4" 301ENM2213AB - 22mm×1/2" 301ENM2219AB - 22mm×3/4" 301ENM2225AB - 22mm×1" 301ENM2819AB - 28mm×3/4" 301ENM2825AB - 28mm×1" 301ENM2832AB - 28mm×1-1/4" 301ENM3525AB - 35mm×1" 301ENM3532AB - 35mm×1-1/4" 301ENM4232AB - 42mm×1-1/4" 301ENM4238AB - 42mm×1-1/2" 301ENM5451AB - 54mm×2" 301ENM6764AB - 66.7mm×2-1/2" 301ENM7664AB - 76.1mm×2-1/2" 301ENM7676AB - 76.1mm×3" 301ENM8976AB - 88.9mm×3" 301ENM108102AB - 108mm×4" 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8" 302ENM1213AB - 12mm×1/2" 302ENM1510AB - 15mm×3/8" 302ENM1513AB - 15mm×1/2" 302ENM1519AB - 15mm×3/4" 302ENM1819AB - 18mm×3/4" 302ENM2213AB - 22mm×1/2" 302ENM2219AB - 22mm×3/4" 302ENM2225AB - 22mm×1" 302ENM2819AB - 28mm×3/4" 302ENM2825AB - 28mm×1" 302ENM3532AB - 35mm×1-1/4" 302ENM4238AB - 42mm×1-1/2" 302ENM5451AB - 54mm×2" 302ENM6764AB - 66.7mm×2-1/2" 302ENM7664AB - 76.1mm×2-1/2" 302ENM7676AB - 76.1mm×3" 302ENM8976AB - 88.9mm×3" 302ENM108102AB - 108mm×4" 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2" 303ENM2213AB - 22mm×1/2" 303ENM2219AB - 22mm×3/4" 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2" 304ENM2213AB - 22mm×1/2" 304ENM2219AB - 22mm×3/4" 304ENM3525AB - 35mm×1" 304ENM5451AB - 54mm×2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2" 313ENM151513AB - 15mm×15mm×1/2" 313ENM181813AB - 18mm×18mm×1/2" 313ENM222213AB - 22mm×22mm×1/2" 313ENM222219AB - 22mm×22mm×3/4" 313ENM282813AB - 28mm×28mm×1/2" 313ENM282819AB - 28mm×28mm×3/4" 313ENM353513AB - 35mm×35mm×1/2" 313ENM424213AB - 42mm×42mm×1/2" 313ENM545413AB - 54mm×54mm×1/2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2" 314ENM1813AB - 18mm×1/2" 314ENM2219AB - 22mm×3/4" 314ENM2825AB - 28mm×1" 315ENM1513AB - 15mm×1/2" 315ENM1813AB - 18mm×1/2" 315ENM2219AB - 22mm×3/4" 315ENM2825AB - 28mm×1"

Manufacturer:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Range of push-fit fittings with polypropylene bodies and NBR seals for use with copper, BS7291 polybutylene and PEX pipe. Cold water use only. Maximum working pressure 16.0 bar.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1909382

Expiry date:

30/09/2024

Note:

Above ground use only

Size:

See Model

Marking:

Plasson and size on body

Installation Requirements:

R001

Model:

1001CU - Copper coupler: 20mm x 15mm - 32mm x 28mm. 1001M - Metric/imperial coupler: 20mm x ½” - 32mm x 1”. 1001U - Coupling: 20mm x 20mm - 63mm x 63mm. 1002C - Copper pipe male adaptor: - 15mm x ¾” - 28mm x 1”. 1002G - Male meter adaptor: 15mm - ¾”. 1002U - Male adaptor: 20mm x ½” - 63mm x 2”. 1003C - Female copper adaptor: 15mm x ¾” - 22mm x ¾”. 1003U - Male adaptor: 20mm x ½” - 63mm x 2”. 1004U - Tee: 20mm x 20mm x 20mm - 63mm x 63mm x 63mm. 1005M - Metric/Imperial elbow: 25mm x ½” - 25mm x ¾”. 1005U - Elbow: 20mm x 20mm - 63mm x 63mm. 1011U - Reducing coupler: 25mm x 20mm - 63mm x 50mm. 1012 - End plug: 20mm - 32mm. 1012U - End plug: 40mm - 63mm. 1014U - Female tee: 25mm x ¾” x 25mm - 32mm x 1” x 32mm. 1015U - Female elbow: 20mm x ½” - 32mm x 1”. 1034U - Reducing tee: 25mm x 20mm x 25mm - 32mm x 25mm x 32mm. 1051U - Reducing elbow 25mm x 20mm. 1075U - Wall plate elbow: 20mm x ½” - 25mm x ¾”. 1085U - Male elbow: 20mm x ½” - 63mm x 2”. 8

Factor:

Plasson UK Ltd

Company Name

Plasson UK Ltd

Address

Plasson House 27 Albert Drive Burgess Hill

Postcode

RH15 9TN

Country

West Sussex

Phone

+44 (0) 1444 244 446

General Email

sales@plasson.co.uk

View All Listings by this Company

Range of brass Pushtite fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1904077

Expiry date:

30/04/2024

Marking:

EXCEL IND & SIZE ON COLLAR/BODY

Installation Requirements:

R001

Model:

PUSHTITE ELBOW: PT1512, PT1534. PUSHTITE STOP END: PT5112, PT5134. PUSHTITE STRAIGHT COUPLING: PT1012, PT1034. PUSHTITE REDUCER x Pipe: PT483412. PUSHTITE EQUAL TEE: PT1812, PT1834. PUSHTITE REDUCING TEE: PT183412, PT18341234 & PT18341212.

Factor:

Excel Industries Ltd

Company Name

Excel Industries Ltd

Address

Coolmine Industrial Estate Clonsilla Road Dublin 15

Postcode

D15N704

Country

Ireland

Phone

+35 31811 8701

General Email

stephen.hope@excel-industries.com

View All Listings by this Company

Fluidfit range of black, grey and white push-fit fittings with plastic bodies, incorporating EPDM ‘O’ rings. For use with LLDPE tube (manufactured to DIN 8072). Maximum working pressures: 4 - 8mm & 5/32” - 5/16” models = 16.0 bar. 10 – 12mm & ⅜” – ½” = 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1912019

Expiry date:

31/12/2024

Note:

R008 applies to the white fittings only

Size:

4mm, 5mm, 6mm, 8mm, 10mm & 12mm. 5/32”, 3/16”, 1/4”, 5/16”, 3/8” & ½”.

Marking:

CDC & size on collet

Installation Requirements:

R001 R008

Model:

Fluidfit range

Manufacturer:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

View All Listings by this Company

Archung series, ‘N.U’ range of S30408 & S31603 stainless steel crimp fit fittings with EPDM ‘O’-rings, for use with stainless steel pipe manufactured to EN10312. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1912026

Expiry date:

31/12/2024

Size:

Crimp and flange connections: 18mm - 108mm. BSP connections: ½” - 2”.

Marking:

N.U. (trademark of Shenzhen Archung Technology Co., Ltd.), size and material type on fitting body.

Installation Requirements:

R001

Model:

Archung series - “N.U” range (S304/S316L08 s/steel fittings end in S304/S316L, S31603 fittings end in S316L): Straight coupling: N.U00S018S304/S316L/S316L: 18mm, N.U00S022S304/S316L: 22mm, N.U00S028S304/S316L: 28mm, N.U00S035S304/S316L: 35mm, N.U00S042S304/S316L: 42mm, N.U00S054S304/S316L: 54mm, N.U00S076S304/S316L: 76.1mm, N.U00S089S304/S316L: 88.9mm, N.U00S108S304/S316L: 108mm. Reducing coupling: N.U0SR2218S304/S316L: 22x18mm, N.U0SR2822S304/S316L: 28x22mm, N.U0SR3528S304/S316L: 35x28mm, N.U0SR4235S304/S316L: 42X35mm, N.U0SR5442S304/S316L: 54X42mm, N.U0SR7654S304/S316L: 76.1X54mm, N.U0SR8954S304/S316L: 88.9X54mm, N.U0SR8976S304/S316L: 88.9X76.1mm, N.U0SR10876S304/S316L: 108X76.1mm, N.U0SR10889S304/S316L: 108X88.9mm. Female thread Straight coupling: N.U0SF18050S304/S316L: 18mmX1/2” BSP (F), N.U0SF22075S304/S316L: 22mmX3/4” BSP (F), N.U0SF28100S304/S316L: 28mmX1” BSP (F), N.U0SF35125S304/S316L: 35mmX11/4” BSP (F), N.U0SF42150S304/S316L: 42mmX11/2” BSP (F), N.U0SF54200S304/S316L: 54mmX2” BSP (F). Female thread Reducing Straight coupling: N.USRF22050S304/S316L: 22mmX1/2” BSP (F), N.USRF28075S304/S316L: 28mmX3/4” BSP (F), N.USRF35100S304/S316L: 35mmX1” BSP (F), N.USRF42125S304/S316L: 42mmX11/4” BSP (F), N.USRF54150S304/S316L: 54mmX11/2” BSP (F). Male thread Straight coupling A: N.U0SM18050S304/S316L: 18mmX1/2” BSP (M), N.U0SM22075S304/S316L: 22mmX3/4” BSP (M), N.U0SM28100S304/S316L: 28mmX1” BSP (M). Male thread Reducing coupling A: N.USRM22050S304/S316L: 22mmX1/2” BSP (M), N.USRM28075S304/S316L: 28mmX3/4” BSP (M). Male thread Straight coupling B: N.U0SM35125S304/S316L: 35mmX11/4” BSP (M), N.U0SM42150S304/S316L: 42mmX11/2” BSP (M), N.U0SM54200S304/S316L: 54mmX2” BSP (M). Male thread Reducing coupling B: N.USRM42125S304/S316L: 42mmX11/4” BSP (M), N.USRM54150S304/S316L: 54mmX11/2” BSP (M). Flange coupling: N.U0SL018S304/S316L: 18mm, N.U0SL022S304/S316L: 22mm, N.U0SL028S304/S316L: 28mm, N.U0SL035S304/S316L: 35mm, N.U0SL042S304/S316L: 42mm, N.U0SL054S304/S316L: 54mm, N.U0SL076S304/S316L: 76.1mm, N.U0SL089S304/S316L: 88.9mm, N.U0SL108S304/S316L: 108mm. 90° Elbow: N.U90E018S304/S316L: 18mm, N.U90E022S304/S316L: 22mm, N.U90E028S304/S316L: 28mm, N.U90E035S304/S316L: 35mm, N.U90E042S304/S316L: 42mm, N.U90E054S304/S316L: 54mm, N.U90E076S304/S316L: 76.1mm, N.U90E089S304/S316L: 88.9mm, N.U90E108S304/S316L: 108mm. 90° ER reducing Elbow: N.U90ER2218S304/S316L: 22X18mm, N.U90ER2822S304/S316L: 28X22mm, N.U90ER3528S304/S316L: 35X28mm, N.U90ER4235S304/S316L: 42X35mm, N.U90ER5442S304/S316L: 54X42mm. 90° ED One-way Elbow: N.U90ED018S304/S316L: 18mm, N.U90ED022S304/S316L: 22mm, N.U90ED028S304/S316L: 28mm, N.U90ED035S304/S316L: 35mm, N.U90ED042S304/S316L: 42mm, N.U90ED054S304/S316L: 54mm. 90° EFZ Female thread short Elbow: N.U90EFZ18050S304/S316L: 18mmX1/2” BSP (F), N.U90EFZ22075S304/S316L: 22mmX3/4” BSP (F), N.U90EFZ28100S304/S316L: 28mmX1” BSP (F). ERFZ Female thread short reducing Elbow: N.U90ERFZ22050S304/S316L: 22mmX1/2” BSP (F), N.U90ERFZ28075S304/S316L: 28mmX3/4” BSP (F). 90° EF Female thread Elbow: N.U90EF18050S304/S316L: 18mmX1/2” BSP (F), N.U90EF22075S304/S316L: 22mmX3/4” BSP (F), N.U90EF28100S304/S316L: 28mmX1” BSP (F), N.U90EF35125S304/S316L: 35mmX11/4” BSP (F), N.U90EF42150S304/S316L: 42mmX11/2” BSP (F), N.U90EF54200S304/S316L: 54mmX2” BSP (F). 90° ERF Female thread reducing Elbow: N.U90ERF22050S304/S316L: 22mmX1/2” BSP (F), N.U90ERF28075S304/S316L: 28mmX3/4” BSP (F), N.U90ERF35100S304/S316L: 35mmX1” BSP (F), N.U90ERF42125S304/S316L: 42mmX11/4” BSP (F), N.U90ERF54150S304/S316L: 54mmX11/2” BSP (F). 90° EM Male thread Elbow: N.U90EM18050S304/S316L: 18mmX1/2” BSP (M), N.U90EM22075S304/S316L: 22mmX3/4” BSP (M), N.U90EM28100S304/S316L: 28mmX1” BSP (M), N.U90EM35125S304/S316L: 35mmX11/4” BSP (M), N.U90EM42150S304/S316L: 42mmX11/2” BSP (M), N.U90EM54200S304/S316L: 54mmX2” BSP (M). 90° ERM Male thread reducing Elbow: N.U90ERM22050S304/S316L: 22mmX1/2” BSP (M), N.U90ERM28075S304/S316L: 28mmX3/4” BSP (M), N.U90ERM35100S304/S316L: 35mmX1” BSP (M), N.U90ERM42125S304/S316L: 42mmX11/4” BSP (M), N.U90ERM54150S304/S316L: 54mmX11/2” BSP (M). 45° Elbow: N.U45E018S304/S316L: 18mm, N.U45E022S304/S316L: 22mm, N.U45E028S304/S316L: 28mm, N.U45E035S304/S316L: 35mm, N.U45E042S304/S316L: 42mm, N.U45E054S304/S316L: 54mm, N.U45E076S304/S316L: 76.1mm, N.U45E089S304/S316L: 88.9mm, N.U45E108S304/S316L: 108mm. 45° ED one-way Elbow: N.U45ED018S304/S316L: 18mm, N.U45ED022S304/S316L: 22mm, N.U45ED028S304/S316L: 28mm, N.U45ED035S304/S316L: 35mm, N.U45ED042S304/S316L: 42mm, N.U45ED054S304/S316L: 54mm. Equal tee: N.U03T018S304/S316L: 18mm, N.U03T022S304/S316L: 22mm, N.U03T028S304/S316L: 28mm, N.U03T035S304/S316L: 35mm, N.U03T042S304/S316L: 42mm, N.U03T054S304/S316L: 54mm, N.U03T076S304/S316L: 76.1mm, N.U03T089S304/S316L: 88.9mm, N.U03T108S304/S316L: 108mm. Reducing tee: N.U3TR2218S304/S316L: 22X18mm, N.U3TR2818S304/S316L: 28X18mm, N.U3TR2822S304/S316L: 28X22mm, N.U3TR3528S304/S316L: 35X28mm, N.U3TR4235S304/S316L: 42X35mm, N.U3TR5442S304/S316L: 54X42mm, N.U3TR7654S304/S316L: 76.1X54mm, N.U3TR8954S304/S316L: 88.9X54mm, N.U3TR8976S304/S316L: 88.9X76.1mm, N.U3TR10876S304/S316L: 108X76.1mm, N.U3TR10889S304/S316L: 108X88.9mm. Female thread Tee: N.U3TF18050S304/S316L: 18mmX1/2” BSP (F), N.U3TF22075S304/S316L: 22mmX3/4” BSP (F), N.U3TF28100S304/S316L: 28mmX1” BSP (F), N.U3TF35125S304/S316L: 35mmX11/4” BSP (F), N.U3TF42150S304/S316L: 42mmX11/2” BSP (F), N.U3TF54200S304/S316L: 54mmX2” BSP (F). Female thread reducing Tee: N.U3TRF22050S304/S316L: 22mmX1/2” BSP (F), N.U3TRF28075S304/S316L: 28mmX3/4” BSP (F), N.U3TRF35100S304/S316L: 35mmX1” BSP (F), N.U3TRF42125S304/S316L: 42mmX11/4” BSP (F), N.U3TRF54150S304/S316L: 54mmX11/2” BSP (F). Male thread Tee: N.U3TM18050S304/S316L: 18mmX1/2” BSP (M), N.U3TM22075S304/S316L: 22mmX3/4” BSP (M), N.U3TM28100S304/S316L: 28mmX1” BSP (M), N.U3TM35125S304/S316L: 35mmX11/4” BSP (M), N.U3TM42150S304/S316L: 42mmX11/2” BSP (M), N.U3TM54200S304/S316L: 54mmX2” BSP (M). Male thread reducing Tee: N.U3TRM22050S304/S316L: 22mmX1/2” BSP (M), N.U3TRM28075S304/S316L: 28mmX3/4” BSP (M), N.U3TRM35100S304/S316L: 35mmX1” BSP (M), N.U3TRM42125S304/S316L: 42mmX11/4” BSP (M), N.U3TRM54150S304/S316L: 54mmX11/2” BSP (M). Adjustable straight: N.U0SK018S304/S316L: 18mm, N.U0SK022S304/S316L: 22mm, N.U0SK028S304/S316L: 28mm, N.U0SK035S304/S316L: 35mm, N.U0SK042S304/S316L: 42mm, N.U0SK054S304/S316L: 54mm, N.U0SK076S304/S316L: 76.1mm, N.U0SK089S304/S316L: 88.9mm, N.U0SK108S304/S316L: 108mm. Hex adaptor: N.U0SD050S304/S316L: 1/2” BSP (F)X1/2” BSP (M), N.U0SD075S304/S316L: 3/4” BSP (F)X3/4” BSP (M), N.U0SD100S304/S316L: 1” BSP (F)X1” BSP (M), N.U0SD125S304/S316L: 11/4” BSP (F)X11/4” BSP (M), N.U0SD150S304/S316L: 11/2” BSP (F)X11/2” BSP (M), N.U0SD200S304/S316L: 2” BSP (F)X2” BSP (M). Short adaptor: N.U0FM075050S304/S316L: 3/4” BSP (M)X1/2” BSP (F), N.U0FM100050S304/S316L: 1” BSP (M)X1/2” BSP (F), N.U0FM100075S304/S316L: 1” BSP (M)X3/4” BSP (F), N.U0FM125100S304/S316L: 11/4” BSP (M)X1” BSP (F), N.U0FM150125S304/S316L: 11/2” BSP (M)X11/4” BSP (F), N.U0FM200150S304/S316L: 2” BSP (M)X11/2 BSP (F). Bridge: N.U00Q018S304/S316L: 18mm, N.U00Q022S304/S316L: 22mm, N.U00Q028S304/S316L: 28mm. Cap: N.U00C018S304/S316L: 18mm, N.U00C022S304/S316L: 22mm, N.U00C028S304/S316L: 28mm, N.U00C035S304/S316L: 35mm, N.U00C042S304/S316L: 42mm, N.U00C054S304/S316L: 54mm.

Manufacturer:

Shenzhen Archung Technology Co. Ltd.

Company Name

Shenzhen Archung Technology Co. Ltd.

Address

A1401 Happy City Commercial Building HePing East Road QingHua Community

Country

Longhua District

View All Listings by this Company

Range of Victaulic clamps with EPDM rubber gaskets. Products in ‘Style 905’ are for use with plain end HDPE pipe and products in ‘Style 907’ are for use with HDPE and steel pipe (EN 10217-1). For above and below ground use. Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10). Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1912034

Expiry date:

31/12/2024

Size:

See models.

Marking:

Victaulic logo, model, size and material on body.

Installation Requirements:

R001

Model:

Style 905 Coupling for Plain End HDPE Pipe - sizes 63, 75, 90, 110, 125, 140, 160, 180, 200, 225mm Style 907 Transition Coupling for HDPE to Steel Pipe - sizes 63, 75, 90, 110, 125, 140, 160, 180, 200, 225mm HDPE Plain End Fittings: No. H10, 90° Elbow - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H11, 45° Elbow - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H20, Tee Straight - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H50, Concentric Reducer - 90x63mm, 110x63mm, 110x90mm, 160x90mm & 160x110mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) Models added April 2021: Style 905 Coupling for Plain End HDPE Pipe -sizes 250mm, 280mm, 315mm: Style 907 Transition Coupling for HDPE to Steel Pipe - sizes 250mm, 280mm: Pressure ratings: SDR 7.4 (PN25), SDR 11 (PN16), & SDR 17 (PN10)

Factor:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36, B-9810 Nazareth

Country

Belgium

View All Listings by this Company

Range of fittings for use with pressure gauges, having nickel plated brass bodies and EPDM ‘o’ rings where applicable. Maximum working pressure: Kee Push fit – 10.0 bar, Kee 050 plug, Kee T Piece, Kee 050 coupler – 35.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1911305

Expiry date:

30/11/2024

Note:

IRN R008 applies to Kee Push fit ¼” BSPP.

Size:

See model.

Marking:

Kee Push fit – Kee-PF on body Kee 050 plug – Kee-P on body Kee T Piece – Kee T on body Kee 050 coupler – Kee-050 series on body

Installation Requirements:

R001 R008

Model:

Kee Push fit: ¼” BSPP x 6mm tube (for use with John Guest blue LLDPE pipe) Kee 050 plug: ¼” BSPP x 9mm plug OD Kee T Piece: 3/8” x 3/8” x 3/8” Kee 050 coupler: ¼” BSPP x 9mm coupler OD

Manufacturer:

Kee Connections LTD

Company Name

Kee Connections LTD

Address

Unit A1 Villiers Court Villiers Road Knowsley Business Park

Postcode

L34 9ET

Country

Prescot

View All Listings by this Company

Range of press-fit fittings with brass bodies and EPDM `O`-rings for use with copper pipe manufactured in accordance with EN1057. Maximum working pressure 16.0 bar (sizes 12mm to 34mm). Maximum working pressure 10.0 bar (sizes 35mm to 54mm). Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2005036

Expiry date:

31/05/2025

Marking:

DBW, CR and size on body

Installation Requirements:

R001

Model:

S6243 (15mm press-fit x 1/2” BSP (M)) S6243 (15mm press-fit x 3/4” BSP (M)) S6243 (18mm press-fit x 1/2” BSP (M)) S6243 (18mm press-fit x 3/4” BSP (M)) S6243 (22mm press-fit x 1/2” BSP (M)) S6243 (22mm press-fit x 3/4” BSP (M)) S6243 (22mm press-fit x 1” BSP (M)) S6243 (28mm press-fit x 3/4” BSP (M)) S6243 (28mm press-fit x 1” BSP (M)) S6243 (35mm press-fit x 1” BSP (M)) S6243 (35mm press-fit x 1.1/4” BSP (M)) S6243 (42mm press-fit x 1.1/2” BSP (M)) S6243 (54mm press-fit x 2” BSP (M)) S6270 (15mm press-fit x 1/2” BSP (F)) S6270 (15mm press-fit x 3/4” BSP (F)) S6270 (18mm press-fit x 1/2” BSP (F)) S6270 (18mm press-fit x 3/4” BSP (F)) S6270 (22mm press-fit x 1/2” BSP (F)) S6270 (22mm press-fit x 3/4” BSP (F)) S6270 (22mm press-fit x 1” BSP (F)) S6270 (28mm press-fit x 3/4” BSP (F)) S6270 (28mm press-fit x 1” BSP (F)) S6270 (35mm press-fit x 1” BSP (F)) S6270 (35mm press-fit x 1.1/4” BSP (F)) S6270 (42mm press-fit x 1.1/2” BSP (F)) S6270 (54mm press-fit x 2” BSP (F)) S6359 (15mm press-fit x 1/2” BSP (F)) S6359 (22mm press-fit x 3/4” BSP (F)) S6359 (15mm press-fit x 3/4” BSP (F)) S6359 (22mm press-fit x 1” BSP (F)) S6359 (28mm press-fit x 1.1/4” BSP (F)) S6092 (15mm press-fit x 1/2” BSP (M)) S6092 (22mm press-fit x 3/4” BSP (M)) S6092 (28mm press-fit x 1” BSP (M)) S6090 (15mm press-fit x 1/2” BSP (F)) S6090 (22mm press-fit x 3/4” BSP (F)) S6090 (28mm press-fit x 1” BSP (F)) S6472 (15mm press-fit x 1/2” BSP (F)) S6472 (22mm press-fit x 3/4” BSP (F)) S6130 (15mm press-fit x 1/2” BSP (F)) S6130 (18mm press-fit x 1/2” BSP (F)) S6130 (22mm press-fit x 1/2” BSP (F)) S6130 (22mm press-fit x 3/4” BSP (F)) S6130 (28mm press-fit x 1/2” BSP (F)) S6130 (28mm press-fit x 3/4” BSP (F)) S6130 (28mm press-fit x 1” BSP (F)) S6130 (35mm press-fit x 1/2” BSP (F)) S6130 (35mm press-fit x 3/4” BSP (F)) S6130 (35mm press-fit x 1” BSP (F)) S6130 (35mm press-fit x 1.1/4” BSP (F)) S6130 (42mm press-fit x 1/2” BSP (F)) S6130 (42mm press-fit x 3/4” BSP (F)) S6130 (42mm press-fit x 1” BSP (F)) S6130 (42mm press-fit x 1.1/2” BSP (F)) S6130 (54mm press-fit x 1/2” BSP (F)) S6130 (54mm press-fit x 1” BSP (F)) S6130 (54mm press-fit x 2” BSP (F)) S6246 (15mm press-fit x 1/2” BSP (F)) S6246 (22mm press-fit x 3/4” BSP (F)) S6341 (15mm press-fit x 1/2” BSP (M)) S6341 (18mm press-fit x 1/2” BSP (M)) S6341 (22mm press-fit x 3/4” BSP (M)) S6341 (28mm press-fit x 1” BSP (M))

Manufacturer:

Taizhou Double Winners Copper Co Ltd

Company Name

Taizhou Double Winners Copper Co Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company