Stainless steel press fittings for use with 316L & 304 stainless steel tube incorporating EPDM ‘O’ rings. The fittings and tube are assembled using a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307003

Expiry date:

31/07/2028

Size:

See models below, note, all sizes in inches are BSP (M) or BSP (F) depending on coupling type (listed in models) and all sizes in mm are crimped.

Marking:

Guanzhou Mayer Corp logo, material, size and pressure on body of fittings.

Installation Requirements:

R001

Model:

Stainless steel pipe, 6m rods: E0115 15x1.0mm E0118 18x1.0mm E0122 22x1.2mm E0128 28x1.2mm E0135 35x1.5mm E0142 42x1.5mm E0154 54x1.5mm E0176 76.1x2.0mm E0189 88.9x2.0mm E01108 108x2.0mm Stainless steel pipe, 3m rods: E0215 15x1.0mm E0218 18x1.0mm E0222 22x1.2mm E0228 28x1.2mm E0235 35x1.5mm E0242 42x1.5mm E0254 54x1.5mm E0276 76.1x2.0mm E0289 88.9x2.0mm E02108 108x2.0mm Coupling: E1015 15mm E1018 18mm E1022 22mm E1028 28mm E1035 35mm E1042 42mm E1054 54mm E1076 76.1mm E1089 88.9mm E10108 108mm Reducing Coupling: E111815 18x15mm E112215 22x15mm E112218 22x18mm E112815 28x15mm E112818 28x18mm E112822 28x22mm E113522 35x22mm E113528 35x28mm E114228 42x28mm E114235 42x35mm E115428 54x28mm E115435 54x35mm E115442 54x42mm E117642 76.1 x42mm E117654 76.1 x54mm E118954 88.9 x54mm E118976 88.9 x76.1mm E1110854 108 x54mm E1110876 108 x76.1mm E1110889 108 x88.9mm Reducer with plain end: E121815 18x15mm E122215 22x15mm E122218 22x18mm E122815 28x15mm E122818 28x18mm E122822 28x22mm E123515 35x15mm E123518 35x18mm E123522 35x22mm E123528 35x28mm E124222 42x22mm E124228 42x28mm E124235 42x35mm E125422 54x22mm E125428 54x28mm E125435 54x35mm E125442 54x42mm E127654 76.1x54mm E128954 88.9x54mm E128976 88.9x76.1mm E1210854 108x54mm E1210876 108x76.1mm E1210889 108x88.9mm Coupling: E1315 15mm E1318 18mm E1322 22mm E1328 28mm E1335 35mm E1342 42mm E1354 54mm Female coupling E141512 15mmx1/2” E141534 15mmx3/4” E141812 18mmx1/2” E141834 18mmx3/4” E142212 22mmx1/2” E142234 22mmx3/4” E14221 22mmx1” E142834 28mmx3/4” E14281 28mmx1” E1435114 35mmx11/4” E1442112 42mmx11/2” E14542 54mmx2” Male coupling E161512 15mmx1/2” E161534 15mmx3/4” E161812 18mmx1/2” E161834 18mmx3/4” E162212 22mmx1/2” E162234 22mmx3/4” E16221 22mmx1” E162834 28mmx3/4” E16281 28mmx1” E1635114 35mmx11/4” E1642112 42mmx11/2” E16542 54mmx2” E1676212 76.1mmx2 1/2” E16893 88.9mmx3” E161084 108mmx4” Union E1C15 15mm E1C18 18mm E1C22 22mm E1C28 28mm E1C35 35mm E1C42 42mm E1C54 54mm Union with Male thread E1815012 15mm E1818012 18mm E1822034 22mm E1828100 28mm E1835114 35mm E1842112 42mm E1854200 54mm 90° Bend E2015 15mm E2018 18mm E2022 22mm E2028 28mm E2035 35mm E2042 42mm E2054 54mm E2076 76.1mm E2089 88.9mm E20108 108mm 90°Bend with plain end E2215 15mm E2218 15mm E2222 22mm E2228 28mm E2235 35mm E2242 42mm E2254 54mm E2276 76.1mm E2289 88.9mm E22108 108mm Female 90°Bend E231512 15mmx1/2” E231812 18mmx1/2” E231834 18mmx3/4” E232234 22mmx3/4” E23281 28mmx1” E2335114 35mmx 11/4” E2342112 42mmx 11/2” E23542 54mmx2” Male 90°Bend E251512 15mmx1/2” E251812 18mmx1/2” E251834 18mmx3/4” E252234 22mmx3/4” E25281 28mmx1” E2535114 35mmx11/4” E2542112 42mmx11/2” E25542 54mmx2” 90°Short Elbow E271512 15mmx1/2” E271812 18mmx1/2” E272212 22mmx1/2” E272234 22mmx3/4” E27281 28mmx1” 90°Elbow with wall plate E2D1512 15mmx1/2” E2D2234 22mmx3/4” E2D281 28mmx1” Equal Tee E3015 15mm E3018 18mm E3022 22mm E3028 28mm E3035 35mm E3042 42mm E3054 54mm E3076 76.1mm E3089 88.9mm E30108 108mm Reducing Tee E31181518 18x15mm E31221522 22x15mm E31221822 22x18mm E31281528 28x15mm E31281828 28x18mm E31282228 28x22mm E31351535 35x15mm E31351835 35x18mm E31352235 35x22mm E31352835 35x28mm E31421542 42x15mm E31421842 42x18mm E31422242 42x22mm E31422842 42x28mm E31423542 42x35mm E31541554 54x15mm E31541854 54x18mm E31542254 54x22mm E31542854 54x28mm E31543554 54x35mm E31544254 54x42mm E31764276 76.1x42mm E31765476 76.1x54mm E31895489 88.9x54mm E31897689 88.9x76.1mm E3110854108 108x54mm E3110876108 108x76.1mm E3110889108 108x88.9mm Female Tee E32151215 15mmx1/2” E32181218 18mmx1/2” E32183418 18mmx3/4” E32221222 22mmx1/2” E32223422 22mmx3/4” E32281228 28mmx1/2” E32283428 28mmx3/4” E3228128 28mmx1” E32351235 35mmx1/2” E32353435 35mmx3/4” E323511435 35mmx11/4” E32421242 42mmx1/2” E32423442 42mmx3/4” E324211242 42mmx11/2” E32541254 54mmx1/2” E3254254 54mmx2” E32763476 76.1mmx3/4” E3276276 76.1mmx2” E32893489 88.9mmx3/4” E3289289 88.9mmx2” E3210834108 108mmx3/4” E321082108 108mmx2” Male Tee E33151215 15mmx1/2” E33181218 18mmx1/2” E33221222 22mmx1/2” E33223422 22mmx3/4” E33281228 28mmx1/2” E33283428 28mmx3/4” E3328128 28mmx1” E33351235 35mmx1/2” E33353435 35mmx3/4” E333511435 35mmx11/4” E33421242 42mmx1/2” E33423442 42mmx3/4” E334211242 42mmx11/2” E33541254 54mmx1/2” E33543454 54mmx3/4” E3354254 54mmx2” E33763476 76.1mmx3/4” E3376276 76.1mmx2” E33893489 88.9mmx3/4” E3389289 88.9mmx2” E3310834108 108mmx3/4” E331082108 108mmx2” 45°Bend E4015 15mm E4018 18mm E4022 22mm E4028 28mm E4035 35mm E4042 42mm E4054 54mm E4076 76.1mm E4089 88.9mm E40108 108mm 45°Bend with plain end E4115 15mm E4118 18mm E4122 22mm E4128 28mm E4135 35mm E4142 42mm E4154 54mm E4176 76.1mm E4189 88.9mm E41108 108mm Cap E5015 15mm E5018 18mm E5022 22mm E5028 28mm E5035 35mm E5042 42mm E5054 54mm Crossover E5115 15mm E5118 18mm E5122 22mm E5128 28mm Flange E1828100 54mm E5376 76.1mm E5389 88.9mm E53108 108mm

Manufacturer:

Guangzhou Mayer Corp., Ltd

Company Name

Guangzhou Mayer Corp., Ltd

Address

No.38, Yonghe Avenue, Yonghe Economic Management Area, Guangzhou Economic &Technological Development Zone, Guangdong province

Country

China

View All Listings by this Company

“D” Range of stainless steel (304S31/316S11) press fittings for use with ‘DPX’ series 1 & 2 stainless steel (304S31/316S11) pipe. The fittings and tube are assembled using a crimping tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309363

Expiry date:

30/09/2028

Size:

12-108mm. ⅜” - 4” BSPT (M). ⅜” - 4” BSPT (F). ½” - 2½” captive nut.

Marking:

Fittings: MECH (brand of Meide Archung (Jinan) Piping Industry Co., Ltd.) and “Mech” brand logo on body. Pipe: “Mech” brand logo on pipe.

Installation Requirements:

R001

Model:

Fittings: D15C-15 (15° elbow with plain ends): 15mm, D15C-18 (15° elbow with plain ends): 18mm, D15C-22 (15° elbow with plain ends): 22mm, D15C-28 (15° elbow with plain ends): 28mm, D15C-35 (15° elbow with plain ends): 35mm, D15C-42 (15° elbow with plain ends): 42mm, D15C-54 (15° elbow with plain ends): 54mm, D15C-76.1 (15° elbow with plain ends): 76.1mm, D15C-88.9 (15° elbow with plain ends): 88.9mm, D15C-108 (15° elbow with plain ends): 108mm, D30C-15 (30° elbow with plain ends): 15mm, D30C-18 (30° elbow with plain ends): 18mm, D30C-22 (30° elbow with plain ends): 22mm, D30C-28 (30° elbow with plain ends): 28mm, D30C-35 (30° elbow with plain ends): 35mm, D30C-42 (30° elbow with plain ends): 42mm, D30C-54 (30° elbow with plain ends): 54mm, D30C-76.1 (30° elbow with plain ends): 76.1mm, D30C-88.9 (30° elbow with plain ends): 88.9mm, D30C-108 (30° elbow with plain ends): 108mm, D45C-15 (45° elbow with plain ends): 15mm, D45C-18 (45° elbow with plain ends): 18mm, D45C-22 (45° elbow with plain ends): 22mm, D45C-28 (45° elbow with plain ends): 28mm, D45C-35 (45° elbow with plain ends): 35mm, D45C-42 (45° elbow with plain ends): 42mm, D45C-54 (45° elbow with plain ends): 54mm, D45C-76.1 (45° elbow with plain ends): 76.1mm, D45C-88.9 (45° elbow with plain ends): 88.9mm, D45C-108 (45° elbow with plain ends): 108mm, D60C-15 (60° elbow with plain ends): 15mm, D60C-18 (60° elbow with plain ends): 18mm, D60C-22 (60° elbow with plain ends): 22mm, D60C-28 (60° elbow with plain ends): 28mm, D60C-35 (60° elbow with plain ends): 35mm, D60C-42 (60° elbow with plain ends): 42mm, D60C-54 (60° elbow with plain ends): 54mm, D60C-76.1 (60° elbow with plain ends): 76.1mm, D60C-88.9 (60° elbow with plain ends): 88.9mm, D60C-108 (60° elbow with plain ends): 108mm, D75C-15 (75° elbow with plain ends): 15mm, D75C-18 (75° elbow with plain ends): 18mm, D75C-22 (75° elbow with plain ends): 22mm, D75C-28 (75° elbow with plain ends): 28mm, D75C-35 (75° elbow with plain ends): 35mm, D75C-42 (75° elbow with plain ends): 42mm, D75C-54 (75° elbow with plain ends): 54mm, D75C-76.1 (75° elbow with plain ends): 76.1mm, D75C-88.9 (75° elbow with plain ends): 88.9mm, D75C-108 (75° elbow with plain ends): 108mm, D90C-12 (90° elbow with plain ends): 12mm, D90C-15 (90° elbow with plain ends): 15mm, D90C-18 (90° elbow with plain ends): 18mm, D90C-22 (90° elbow with plain ends): 22mm, D90C-28 (90° elbow with plain ends): 28mm, D90C-35 (90° elbow with plain ends): 35mm, D90C-42 (90° elbow with plain ends): 42mm, D90C-54 (90° elbow with plain ends): 54mm, D90C-76.1 (90° elbow with plain ends): 76.1mm, D90C-88.9 (90° elbow with plain ends): 88.9mm, D90C-108 (90° elbow with plain ends): 108mm, DSQ-15 (Pipe bridge): 15mm, DSQ-18 (Pipe bridge): 18mm, DSQ-22 (Pipe bridge): 22mm, DSQ-28 (Pipe bridge): 28mm, DSQS-15 (Short pipe bridge): 15mm, DSQS-18 (Short pipe bridge): 18mm, DSQS-22 (Short pipe bridge): 22mm, DSQS-28 (Short pipe bridge): 28mm, DDGQ-12 (Single card pipe bridge): 12mm, DDGQ-15 (Single card pipe bridge): 15mm, DDGQ-18 (Single card pipe bridge): 18mm, DDGQ-22 (Single card pipe bridge): 22mm, DDGQ-28 (Single card pipe bridge): 28mm, D45-12 (45° elbow): 12mm, D45-15 (45° elbow): 15mm, D45-18 (45° elbow): 18mm, D45-22 (45° elbow): 22mm, D45-28 (45° elbow): 28mm, D45-35 (45° elbow): 35mm, D45-42 (45° elbow): 42mm, D45-54 (45° elbow): 54mm, D45-66.7 (45° elbow): 66.7mm, D45-76.1 (45° elbow): 76.1mm, D45-88.9 (45° elbow): 88.9mm, D45-108 (45° elbow): 108mm, D45D-12 (45° one-way elbow (long radius): 12mm, D45D-15 (45° one-way elbow (long radius): 15mm, D45D-18 (45° one-way elbow (long radius): 18mm, D45D-22 (45° one-way elbow (long radius): 22mm, D45D-28 (45° one-way elbow (long radius): 28mm, D45D-35 (45° one-way elbow (long radius): 35mm, D45D-42 (45° one-way elbow (long radius): 42mm, D45D-54 (45° one-way elbow (long radius): 54mm, D45D-66.7 (45° one-way elbow (long radius): 66.7mm, D45D-76.1 (45° one-way elbow (long radius): 76.1mm, D45D-88.9 (45° one-way elbow (long radius): 88.9mm, D45D-108 (45° one-way elbow (long radius): 108mm, D45DS-12 (45° one-way elbow (short radius): 12mm, D45DS-15 (45° one-way elbow (short radius): 15mm, D45DS-18 (45° one-way elbow (short radius): 18mm, D45DS-22 (45° one-way elbow (short radius): 22mm, D45DS-28 (45° one-way elbow (short radius): 28mm, D45DS-35 (45° one-way elbow (short radius): 35mm, D45DS-42 (45° one-way elbow (short radius): 42mm, D45DS-54 (45° one-way elbow (short radius): 54mm, D45DS-66.7 (45° one-way elbow (short radius): 66.7mm, D45DS-76.1 (45° one-way elbow (short radius): 76.1mm, D45DS-88.9 (45° one-way elbow (short radius): 88.9mm, D45DS-108 (45° one-way elbow (short radius): 108mm, D45R-22X18 (45° variable diameter elbow): 22X18mm, D90-12 (90° elbow): 12mm, D90-15 (90° elbow): 15mm, D90-18 (90° elbow): 18mm, D90-22 (90° elbow): 22mm, D90-28 (90° elbow): 28mm, D90-35 (90° elbow): 35mm, D90-42 (90° elbow): 42mm, D90-54 (90° elbow): 54mm, D90-66.7 (90° elbow): 66.7mm, D90-76.1 (90° elbow): 76.1mm, D90-88.9 (90° elbow): 88.9mm, D90-108 (90° elbow): 108mm, D90S-12 (90° elbow (short radius): 12mm, D90S-15 (90° elbow (short radius): 15mm, D90S-18 (90° elbow (short radius): 18mm, D90S-22 (90° elbow (short radius): 22mm, D90S-28 (90° elbow (short radius): 28mm, D90S-35 (90° elbow (short radius): 35mm, D90S-42 (90° elbow (short radius): 42mm, D90S-54 (90° elbow (short radius): 54mm, D90S-66.7 (90° elbow (short radius): 66.7mm, D90S-76.1 (90° elbow (short radius): 76.1mm, D90S-88.9 (90° elbow (short radius): 88.9mm, D90S-108 (90° elbow (short radius): 108mm, D90D-12 (90° one-way elbow (long radius): 12mm, D90D-15 (90° one-way elbow (long radius): 15mm, D90D-18 (90° one-way elbow (long radius): 18mm, D90D-22 (90° one-way elbow (long radius): 22mm, D90D-28 (90° one-way elbow (long radius): 28mm, D90D-35 (90° one-way elbow (long radius): 35mm, D90D-42 (90° one-way elbow (long radius): 42mm, D90D-54 (90° one-way elbow (long radius): 54mm, D90D-66.7 (90° one-way elbow (long radius): 66.7mm, D90D-76.1 (90° one-way elbow (long radius): 76.1mm, D90D-88.9 (90° one-way elbow (long radius): 88.9mm, D90D-108 (90° one-way elbow (long radius): 108mm, D90DS-12 (90° one-way elbow (short radius): 12mm, D90DS-15 (90° one-way elbow (short radius): 15mm, D90DS-18 (90° one-way elbow (short radius): 18mm, D90DS-22 (90° one-way elbow (short radius): 22mm, D90DS-28 (90° one-way elbow (short radius): 28mm, D90DS-35 (90° one-way elbow (short radius): 35mm, D90DS-42 (90° one-way elbow (short radius): 42mm, D90DS-54 (90° one-way elbow (short radius): 54mm, D90DS-66.7 (90° one-way elbow (short radius): 66.7mm, D90DS-76.1 (90° one-way elbow (short radius): 76.1mm, D90DS-88.9 (90° one-way elbow (short radius): 88.9mm, D90DS-108 (90° one-way elbow (short radius): 108mm, D90R-22X18 (90° variable diameter elbow): 22X18mm, D90R-28X18 (90° variable diameter elbow): 28X18mm, D90R-28X22 (90° variable diameter elbow): 28X22mm, D90R-35X22 (90° variable diameter elbow): 35X22mm, D90R-35X28 (90° variable diameter elbow): 35X28mm, D90R-42X22 (90° variable diameter elbow): 42X22mm, D90R-42X28 (90° variable diameter elbow): 42X28mm, D90R-42X35 (90° variable diameter elbow): 42X35mm, D90R-54X22 (90° variable diameter elbow): 54X22mm, D90R-54X28 (90° variable diameter elbow): 54X28mm, D90R-54X35 (90° variable diameter elbow): 54X35mm, D90R-54X42 (90° variable diameter elbow): 54X42mm, D90F-15-15 (90° elbow with female thread): 15-15mm, D90F-18-15 (90° elbow with female thread): 18-15mm, D90F-22-20 (90° elbow with female thread): 22-20mm, D90F-28-25 (90° elbow with female thread): 28-25mm, D90F-35-32 (90° elbow with female thread): 35-32mm, D90F-42-40 (90° elbow with female thread): 42-40mm, D90F-54-50 (90° elbow with female thread): 54-50mm, D90RF-15-10 (90° reducing elbow with female thread): 15-10mm, D90RF-22-15 (90° reducing elbow with female thread): 22-15mm, D90RF-28-15 (90° reducing elbow with female thread): 28-15mm, D90RF-28-20 (90° reducing elbow with female thread): 28-20mm, D90RF-35-15 (90° reducing elbow with female thread): 35-15mm, D90RF-35-25 (90° reducing elbow with female thread): 35-25mm, D90RF-42-32 (90° reducing elbow with female thread): 42-32mm, D90RF-54-40 (90° reducing elbow with female thread): 54-40mm, D90M-15-15 (90° external thread elbow): 15-15mm, D90M-18-15 (90° external thread elbow): 18-15mm, D90M-22-20 (90° external thread elbow): 22-20mm, D90M-28-25 (90° external thread elbow): 28-25mm, D90M-35-32 (90° external thread elbow): 35-32mm, D90M-42-40 (90° external thread elbow): 42-40mm, D90M-54-50 (90° external thread elbow): 54-50mm, D90RM-15-10 (90° reducing elbow with male thread): 15-10mm, D90RM-22-15 (90° reducing elbow with male thread): 22-15mm, D90RM-28-15 (90° reducing elbow with male thread): 28-15mm, D90RM-35-15 (90° reducing elbow with male thread): 35-15mm, D90RM-35-25 (90° reducing elbow with male thread): 35-25mm, D90RM-42-32 (90° reducing elbow with male thread): 42-32mm, D90RM-54-40 (90° reducing elbow with male thread): 54-40mm, D90FZ-15-15 (90° short elbow with female thread): 15-15mm, D90FZ-18-15 (90° short elbow with female thread): 18-15mm, D90FZ-22-20 (90° short elbow with female thread): 22-20mm, D90FZ-28-25 (90° short elbow with female thread): 28-25mm, D90FZ-35-32 (90° short elbow with female thread): 35-32mm, D90RFZ-15-20 (90° short structure variable diameter elbow): 15-20mm, D90RFZ-18-20 (90° short structure variable diameter elbow): 18-20mm, D90RFZ-22-15 (90° short structure variable diameter elbow): 22-15mm, D90RFZ-22-25 (90° short structure variable diameter elbow): 22-25mm, D90RFZ-28-15 (90° short structure variable diameter elbow): 28-15mm, D90FCB-15-15 (90° bearing plate elbow with female thread): 15-15mm, D90FCB-18-15 (90° bearing plate elbow with female thread): 18-15mm, D90FCB-22-20 (90° bearing plate elbow with female thread): 22-20mm, D90FCBL-15-15 (90° Female Elbow with Long wall Plate): 15-15mm, D90FCBL-18-15 (90° Female Elbow with Long wall Plate): 18-15mm, D90FCBL-22-20 (90° Female Elbow with Long wall Plate): 22-20mm, D90FZP-15-15 (90° Female Elbow with Seat Plate): 15-15mm, D90FZP-18-15 (90° Female Elbow with Seat Plate): 18-15mm, D90FZP-22-20 (90° Female Elbow with Seat Plate): 22-20mm, DM90F-15-15 (Double Tap Connector 90°/90° with Female Thread): 15-15mm, D90MZ-15-15 (90° short elbow with male thread): 15-15mm, D90MZ-18-15 (90° short elbow with male thread): 18-15mm, D90MZ-22-20 (90° short elbow with male thread): 22-20mm, D90MZ-28-25 (90° short elbow with male thread): 28-25mm, D90MZ-35-32 (90° short elbow with male thread): 35-32mm, D90MZ-42-40 (90° short elbow with male thread): 42-40mm, D90MZ-54-50 (90° short elbow with male thread): 54-50mm, D90RMZ-18-20 (90° reducing short elbow with male thread): 18-20mm, DL-15 (Flange): 15mm, DL-18 (Flange): 18mm, DL-22 (Flange): 22mm, DL-28 (Flange): 28mm, DL-35 (Flange): 35mm, DL-42 (Flange): 42mm, DL-54 (Flange): 54mm, DL-76.1 (Flange): 76.1mm, DL-88.9 (Flange): 88.9mm, DL-108 (Flange): 108mm, DDSL-15 (Adaptador flange): 15mm, DDSL-18 (Adaptador flange): 18mm, DDSL-22 (Adaptador flange): 22mm, DDSL-28 (Adaptador flange): 28mm, DDSL-35 (Adaptador flange): 35mm, DDSL-42 (Adaptador flange): 42mm, DDSL-54 (Adaptador flange): 54mm, DDSL-66.7 (Adaptador flange): 66.7mm, DDSL-76.1 (Adaptador flange): 76.1mm, DDSL-88.9 (Adaptador flange): 88.9mm, DDSL-108 (Adaptador flange): 108mm, DSS-22 (Flexible coupling): 22mm, DSFC-12-15 (Straight pipe with female thread): 12-15mm, DSFC-15-15 (Straight pipe with female thread): 15-15mm, DSFC-18-15 (Straight pipe with female thread): 18-15mm, DSFC-18-20 (Straight pipe with female thread): 18-20mm, DSFC-22-15 (Straight pipe with female thread): 22-15mm, DSFC-22-20 (Straight pipe with female thread): 22-20mm, DSFC-42-40 (Straight pipe with female thread): 42-40mm, DSFC-28-20 (Straight pipe with female thread): 28-20mm, DSFC-28-25 (Straight pipe with female thread): 28-25mm, DSFC-35-32 (Straight pipe with female thread): 35-32mm, DSFC-54-50 (Straight pipe with female thread): 54-50mm, DSMC-15-15 (Straight pipe with male thread): 15-15mm, DSMC-18-15 (Straight pipe with male thread): 18-15mm, DSMC-18-20 (Straight pipe with male thread): 18-20mm, DSMC-22-15 (Straight pipe with male thread): 22-15mm, DSMC-22-20 (Straight pipe with male thread): 22-20mm, DSMC-22-25 (Straight pipe with male thread): 22-25mm, DSMC-28-20 (Straight pipe with male thread): 28-20mm, DSMC-28-25 (Straight pipe with male thread): 28-25mm, DSMC-28-32 (Straight pipe with male thread): 28-32mm, DSMC-35-32 (Straight pipe with male thread): 35-32mm, DSMC-42-40 (Straight pipe with male thread): 42-40mm, DSMC-54-50 (Straight pipe with male thread): 54-50mm, DDS-12 (Coupling): 12mm, DDS-15 (Coupling): 15mm, DDS-18 (Coupling): 18mm, DDS-22 (Coupling): 22mm, DDS-28 (Coupling): 28mm, DDS-35 (Coupling): 35mm, DDS-42 (Coupling): 42mm, DDS-54 (Coupling): 54mm, DDS-66.7 (Coupling): 66.7mm, DDS-76.1 (Coupling): 76.1mm, DDS-88.9 (Coupling): 88.9mm, DDS-108 (Coupling): 108mm, DSK-12 (Coupling without stop): 12mm, DSK-15 (Coupling without stop): 15mm, DSK-18 (Coupling without stop): 18mm, DSK-22 (Coupling without stop): 22mm, DSK-28 (Coupling without stop): 28mm, DSK-35 (Coupling without stop): 35mm, DSK-42 (Coupling without stop): 42mm, DSK-54 (Coupling without stop): 54mm, DSK-66.7 (Coupling without stop): 66.7mm, DSK-76.1 (Coupling without stop): 76.1mm, DSK-88.9 (Coupling without stop): 88.9mm, DSK-108 (Coupling without stop): 108mm, DSF-15-15 (Female thread coupling): 15-15mm, DSF-18-15 (Female thread coupling): 18-15mm, DSF-22-20 (Female thread coupling): 22-20mm, DSF-28-25 (Female thread coupling): 28-25mm, DSF-35-32 (Female thread coupling): 35-32mm, DSF-42-40 (Female thread coupling): 42-40mm, DSF-54-50 (Female thread coupling): 54-50mm, DSF-108-100 (Female thread coupling): 108-100mm, DSF-76.1-65 (Female thread coupling): 76.1-65mm, DSF-88.9-80 (Female thread coupling): 88.9-80mm, DSRF-12-15 (Female thread reducing coupling): 12-15mm, DSRF-15-10 (Female thread reducing coupling): 15-10mm, DSRF-15-20 (Female thread reducing coupling): 15-20mm, DSRF-18-20 (Female thread reducing coupling): 18-20mm, DSRF-22-15 (Female thread reducing coupling): 22-15mm, DSRF-22-25 (Female thread reducing coupling): 22-25mm, DSRF-28-15 (Female thread reducing coupling): 28-15mm, DSRF-28-20 (Female thread reducing coupling): 28-20mm, DSRF-28-32 (Female thread reducing coupling): 28-32mm, DSRF-35-20 (Female thread reducing coupling): 35-20mm, DSRF-35-25 (Female thread reducing coupling): 35-25mm, DSRF-35-40 (Female thread reducing coupling): 35-40mm, DSRF-42-32 (Female thread reducing coupling): 42-32mm, DSRF-42-50 (Female thread reducing coupling): 42-50mm, DSRF-54-40 (Female thread reducing coupling): 54-40mm, DSRF-76.1-40 (Female thread reducing coupling): 76.1-40mm, DSM-12-10 (Male thread coupling): 12-10mm, DSM-15-15 (Male thread coupling): 15-15mm, DSM-18-15 (Male thread coupling): 18-15mm, DSM-22-20 (Male thread coupling): 22-20mm, DSM-28-25 (Male thread coupling): 28-25mm, DSM-35-32 (Male thread coupling): 35-32mm, DSM-42-40 (Male thread coupling): 42-40mm, DSM-54-50 (Male thread coupling): 54-50mm, DSM-76.1-65 (Male thread coupling): 76.1-65mm, DSM-88.9-80 (Male thread coupling): 88.9-80mm, DSM-108-100 (Male thread coupling): 108-100mm, DSRM-12-15 (Male thread reducing coupling): 12-15mm, DSRM-15-10 (Male thread reducing coupling): 15-10mm, DSRM-15-20 (Male thread reducing coupling): 15-20mm, DSRM-18-20 (Male thread reducing coupling): 18-20mm, DSRM-22-15 (Male thread reducing coupling): 22-15mm, DSRM-22-25 (Male thread reducing coupling): 22-25mm, DSRM-28-20 (Male thread reducing coupling): 28-20mm, DSRM-28-32 (Male thread reducing coupling): 28-32mm, DSRM-35-15 (Male thread reducing coupling): 35-15mm, DSRM-35-25 (Male thread reducing coupling): 35-25mm, DSRM-35-40 (Male thread reducing coupling): 35-40mm, DSRM-42-32 (Male thread reducing coupling): 42-32mm, DSRM-54-40 (Male thread reducing coupling): 54-40mm, DSRM-66.7-65 (Male thread reducing coupling): 66.7-65mm, DSR-22X15 (Reducing coupling): 22X15mm, DSR-22X18 (Reducing coupling): 22X18mm, DSR-28X15 (Reducing coupling): 28X15mm, DSR-28X18 (Reducing coupling): 28X18mm, DSR-28X22 (Reducing coupling): 28X22mm, DSR-35X18 (Reducing coupling): 35X18mm, DSR-35X22 (Reducing coupling): 35X22mm, DSR-35X28 (Reducing coupling): 35X28mm, DSR-42X18 (Reducing coupling): 42X18mm, DSR-42X22 (Reducing coupling): 42X22mm, DSR-42X28 (Reducing coupling): 42X28mm, DSR-42X35 (Reducing coupling): 42X35mm, DSR-54X18 (Reducing coupling): 54X18mm, DSR-54X22 (Reducing coupling): 54X22mm, DSR-54X28 (Reducing coupling): 54X28mm, DSR-54X35 (Reducing coupling): 54X35mm, DSR-54X42 (Reducing coupling): 54X42mm, DSR-76.1X35 (Reducing coupling): 76.1X35mm, DSR-76.1X42 (Reducing coupling): 76.1X42mm, DSR-76.1X54 (Reducing coupling): 76.1X54mm, DSR-88.9X42 (Reducing coupling): 88.9X42mm, DSR-88.9X54 (Reducing coupling): 88.9X54mm, DSR-88.9X76.1 (Reducing coupling): 88.9X76.1mm, DSR-108X54 (Reducing coupling): 108X54mm, DSR-108X76.1 (Reducing coupling): 108X76.1mm, DSR-108X88.9 (Reducing coupling): 108X88.9mm, DSRCK-12X15 (Reducer with plain end): 12X15mm, DSRCK-12X18 (Reducer with plain end): 12X18mm, DSRCK-12X22 (Reducer with plain end): 12X22mm, DSRCK-12X28 (Reducer with plain end): 12X28mm, DSRCK-15X18 (Reducer with plain end): 15X18mm, DSRCK-15X22 (Reducer with plain end): 15X22mm, DSRCK-15X28 (Reducer with plain end): 15X28mm, DSRCK-15X35 (Reducer with plain end): 15X35mm, DSRCK-15X42 (Reducer with plain end): 15X42mm, DSRCK-15X54 (Reducer with plain end): 15X54mm, DSRCK-18X22 (Reducer with plain end): 18X22mm, DSRCK-18X28 (Reducer with plain end): 18X28mm, DSRCK-18X35 (Reducer with plain end): 18X35mm, DSRCK-18X42 (Reducer with plain end): 18X42mm, DSRCK-18X54 (Reducer with plain end): 18X54mm, DSRCK-22X28 (Reducer with plain end): 22X28mm, DSRCK-22X35 (Reducer with plain end): 22X35mm, DSRCK-22X42 (Reducer with plain end): 22X42mm, DSRCK-22X54 (Reducer with plain end): 22X54mm, DSRCK-28X35 (Reducer with plain end): 28X35mm, DSRCK-28X42 (Reducer with plain end): 28X42mm, DSRCK-28X54 (Reducer with plain end): 28X54mm, DSRCK-28X66.7 (Reducer with plain end): 28X66.7mm, DSRCK-35X42 (Reducer with plain end): 35X42mm, DSRCK-35X54 (Reducer with plain end): 35X54mm, DSRCK-35X66.7 (Reducer with plain end): 35X66.7mm, DSRCK-42X54 (Reducer with plain end): 42X54mm, DSRCK-42X66.7 (Reducer with plain end): 42X66.7mm, DSRCK-42X76.1 (Reducer with plain end): 42X76.1mm, DSRCK-54X66.7 (Reducer with plain end): 54X66.7mm, DSRCK-54X76.1 (Reducer with plain end): 54X76.1mm, DSRCK-54X88.9 (Reducer with plain end): 54X88.9mm, DSRCK-54X108 (Reducer with plain end): 54X108mm, DSRCK-66.7X76.1 (Reducer with plain end): 66.7X76.1mm, DSRCK-66.7X88.9 (Reducer with plain end): 66.7X88.9mm, DSRCK-66.7X108 (Reducer with plain end): 66.7X108mm, DSRCK-76.1X108 (Reducer with plain end): 76.1X108mm, DSRCK-76.1X88.9 (Reducer with plain end): 76.1X88.9mm, DSRCK-88.9X108 (Reducer with plain end): 88.9X108mm, DSRCK-108X168.3 (Reducer with plain end): 108X168.3mm, DSHJRM-15-20 (Variable diameter outer silk alive joint): 15-20mm, DSHJRM-18-20 (Variable diameter outer silk alive joint): 18-20mm, DSHJRM-22-15 (Variable diameter outer silk alive joint): 22-15mm, DSHJRM-22-25 (Variable diameter outer silk alive joint): 22-25mm, DSHJRM-28-32 (Variable diameter outer silk alive joint): 28-32mm, DHF-15-15 (Moveable union): 15-15mm, DHF-18-15 (Moveable union): 18-15mm, DHF-22-20 (Moveable union): 22-20mm, DHF-28-25 (Moveable union): 28-25mm, DHF-35-32 (Moveable union): 35-32mm, DHF-42-40 (Moveable union): 42-40mm, DHF-54-50 (Moveable union): 54-50mm, DHF-76.1-65 (Moveable union): 76.1-65mm, DHRF-15-20 (Reducing moveable union): 15-20mm, DHRF-18-20 (Reducing moveable union): 18-20mm, DHRF-22-15 (Reducing moveable union): 22-15mm, DHRF-22-25 (Reducing moveable union): 22-25mm, DHRF-28-32 (Reducing moveable union): 28-32mm, DHRF-35-40 (Reducing moveable union): 35-40mm, DHRF-42-G1 3/4 (Reducing moveable union): 42-G1 3/4mm, DHRF-42-50 (Reducing moveable union): 42-50mm, DHRF-54-65 (Reducing moveable union): 54-65mm, DHRF-54-G2 3/8 (Reducing moveable union): 54-G2 3/8mm, D3T-12X12X12 (Equal tee): 12X12X12mm, D3T-15X15X15 (Equal tee): 15X15X15mm, D3T-18X18X18 (Equal tee): 18X18X18mm, D3T-22X22X22 (Equal tee): 22X22X22mm, D3T-28X28X28 (Equal tee): 28X28X28mm, D3T-35X35X35 (Equal tee): 35X35X35mm, D3T-42X42X42 (Equal tee): 42X42X42mm, D3T-54X54X54 (Equal tee): 54X54X54mm, D3T-66.7X66.7X66.7 (Equal tee): 66.7X66.7X66.7mm, D3T-76.1X76.1X76.1 (Equal tee): 76.1X76.1X76.1mm, D3T-88.9X88.9X88.9 (Equal tee): 88.9X88.9X88.9mm, D3T-108X108X108 (Equal tee): 108X108X108mm, DTF-15-15X15 (Female thread equal tee): 15-15X15mm, DTF-18-15X18 (Female thread equal tee): 18-15X18mm, DTF-22-20X22 (Female thread equal tee): 22-20X22mm, DTF-28-25X28 (Female thread equal tee): 28-25X28mm, DTF-35-32X35 (Female thread equal tee): 35-32X35mm, DTF-42-40X42 (Female thread equal tee): 42-40X42mm, DTF-54-50X54 (Female thread equal tee): 54-50X54mm, DTRF-18-20X18 (Reducing tee with female thread branch): 18-20X18mm, DTRF-22-15X22 (Reducing tee with female thread branch): 22-15X22mm, DTRF-28-15X28 (Reducing tee with female thread branch): 28-15X28mm, DTRF-28-20X28 (Reducing tee with female thread branch): 28-20X28mm, DTRF-35-15X35 (Reducing tee with female thread branch): 35-15X35mm, DTRF-35-20X35 (Reducing tee with female thread branch): 35-20X35mm, DTRF-35-25X35 (Reducing tee with female thread branch): 35-25X35mm, DTRF-42-15X42 (Reducing tee with female thread branch): 42-15X42mm, DTRF-42-20X42 (Reducing tee with female thread branch): 42-20X42mm, DTRF-42-25X42 (Reducing tee with female thread branch): 42-25X42mm, DTRF-42-32X42 (Reducing tee with female thread branch): 42-32X42mm, DTRF-54-15X54 (Reducing tee with female thread branch): 54-15X54mm, DTRF-54-20X54 (Reducing tee with female thread branch): 54-20X54mm, DTRF-54-25X54 (Reducing tee with female thread branch): 54-25X54mm, DTRF-54-32X54 (Reducing tee with female thread branch): 54-32X54mm, DTRF-54-40X54 (Reducing tee with female thread branch): 54-40X54mm, DTRF-66.7-20X66.7 (Reducing tee with female thread branch): 66.7-20X66.7mm, DTRF-76.1-20X76.1 (Reducing tee with female thread branch): 76.1-20X76.1mm, DTRF-76.1-50X76.1 (Reducing tee with female thread branch): 76.1-50X76.1mm, DTRF-88.9-20X88.9 (Reducing tee with female thread branch): 88.9-20X88.9mm, DTRF-88.9-50X88.9 (Reducing tee with female thread branch): 88.9-50X88.9mm, DTRF-108-20X108 (Reducing tee with female thread branch): 108-20X108mm, DTRF-108-50X108 (Reducing tee with female thread branch): 108-50X108mm, DTM-15-15X15 (Male thread equal tee): 15-15X15mm, DTM-18-15X18 (Male thread equal tee): 18-15X18mm, DTM-22-20X22 (Male thread equal tee): 22-20X22mm, DTM-28-25X28 (Male thread equal tee): 28-25X28mm, DTM-35-32X35 (Male thread equal tee): 35-32X35mm, DTM-42-40X42 (Male thread equal tee): 42-40X42mm, DTM-54-50X54 (Male thread equal tee): 54-50X54mm, DTRM-22-25X22 (Reducing tee with male thread branch): 22-25X22mm, DTRM-22-15X22 (Reducing tee with male thread branch): 22-15X22mm, DTRM-28-15X28 (Reducing tee with male thread branch): 28-15X28mm, DTRM-28-20X28 (Reducing tee with male thread branch): 28-20X28mm, DTRM-35-20X35 (Reducing tee with male thread branch): 35-20X35mm, DTRM-35-25X35 (Reducing tee with male thread branch): 35-25X35mm, DTRM-35-40X35 (Reducing tee with male thread branch): 35-40X35mm, DTRM-42-20X42 (Reducing tee with male thread branch): 42-20X42mm, DTRM-42-25X42 (Reducing tee with male thread branch): 42-25X42mm, DTRM-42-32X42 (Reducing tee with male thread branch): 42-32X42mm, DTRM-54-25X54 (Reducing tee with male thread branch): 54-25X54mm, DTRM-54-40X54 (Reducing tee with male thread branch): 54-40X54mm, DTR-15X12X15 (Reducing tee): 15X12X15mm, DTR-15X18X15 (Reducing tee): 15X18X15mm, DTR-15X22X15 (Reducing tee): 15X22X15mm, DTR-18X15X15 (Reducing tee): 18X15X15mm, DTR-18X12X18 (Reducing tee): 18X12X18mm, DTR-18X15X18 (Reducing tee): 18X15X18mm, DTR-18X22X18 (Reducing tee): 18X22X18mm, DTR-22X12X22 (Reducing tee): 22X12X22mm, DTR-22X15X15 (Reducing tee): 22X15X15mm, DTR-22X18X18 (Reducing tee): 22X18X18mm, DTR-22X28X22 (Reducing tee): 22X28X22mm, DTR-22X15X22 (Reducing tee): 22X15X22mm, DTR-22X18X22 (Reducing tee): 22X18X22mm, DTR-28X15X28 (Reducing tee): 28X15X28mm, DTR-28X18X28 (Reducing tee): 28X18X28mm, DTR-28X22X22 (Reducing tee): 28X22X22mm, DTR-28X22X28 (Reducing tee): 28X22X28mm, DTR-35X15X35 (Reducing tee): 35X15X35mm, DTR-35X18X35 (Reducing tee): 35X18X35mm, DTR-35X22X35 (Reducing tee): 35X22X35mm, DTR-35X28X35 (Reducing tee): 35X28X35mm, DTR-42X15X42 (Reducing tee): 42X15X42mm, DTR-42X18X42 (Reducing tee): 42X18X42mm, DTR-42X22X42 (Reducing tee): 42X22X42mm, DTR-42X28X35 (Reducing tee): 42X28X35mm, DTR-42X28X42 (Reducing tee): 42X28X42mm, DTR-42X35X42 (Reducing tee): 42X35X42mm, DTR-42X54X42 (Reducing tee): 42X54X42mm, DTR-54X15X54 (Reducing tee): 54X15X54mm, DTR-54X18X54 (Reducing tee): 54X18X54mm, DTR-54X22X54 (Reducing tee): 54X22X54mm, DTR-54X28X54 (Reducing tee): 54X28X54mm, DTR-54X35X54 (Reducing tee): 54X35X54mm, DTR-54X42X54 (Reducing tee): 54X42X54mm, DTR-66.7X22X66.7 (Reducing tee): 66.7X22X66.7mm, DTR-66.7X28X66.7 (Reducing tee): 66.7X28X66.7mm, DTR-66.7X35X66.7 (Reducing tee): 66.7X35X66.7mm, DTR-66.7X42X66.7 (Reducing tee): 66.7X42X66.7mm, DTR-66.7X54X66.7 (Reducing tee): 66.7X54X66.7mm, DTR-76.1X22X76.1 (Reducing tee): 76.1X22X76.1mm, DTR-76.1X28X76.1 (Reducing tee): 76.1X28X76.1mm, DTR-76.1X35X76.1 (Reducing tee): 76.1X35X76.1mm, DTR-76.1X42X76.1 (Reducing tee): 76.1X42X76.1mm, DTR-76.1X54X76.1 (Reducing tee): 76.1X54X76.1mm, DTR-76.1X66.7X76.1 (Reducing tee): 76.1X66.7X76.1mm, DTR-88.9X22X88.9 (Reducing tee): 88.9X22X88.9mm, DTR-88.9X28X88.9 (Reducing tee): 88.9X28X88.9mm, DTR-88.9X35X88.9 (Reducing tee): 88.9X35X88.9mm, DTR-88.9X42X88.9 (Reducing tee): 88.9X42X88.9mm, DTR-88.9X54X88.9 (Reducing tee): 88.9X54X88.9mm, DTR-88.9X66.7X88.9 (Reducing tee): 88.9X66.7X88.9mm, DTR-88.9X76.1X88.9 (Reducing tee): 88.9X76.1X88.9mm, DTR-108X22X108 (Reducing tee): 108X22X108mm, DTR-108X28X108 (Reducing tee): 108X28X108mm, DTR-108X35X108 (Reducing tee): 108X35X108mm, DTR-108X42X108 (Reducing tee): 108X42X108mm, DTR-108X54X108 (Reducing tee): 108X54X108mm, DTR-108X66.7X108 (Reducing tee): 108X66.7X108mm, DTR-108X76.1X108 (Reducing tee): 108X76.1X108mm, DTR-108X88.9X108 (Reducing tee): 108X88.9X108mm, DTR-28X35X28 (Reducing tee): 28X35X28mm, DTR-28X42X28 (Reducing tee): 28X42X28mm, DTR-35X28X28 (Reducing tee): 35X28X28mm, DTR-35X42X35 (Reducing tee): 35X42X35mm, DTR-35X54X35 (Reducing tee): 35X54X35mm, DTR-54X35X28 (Reducing tee): 54X35X28mm, DTR-54X42X35 (Reducing tee): 54X42X35mm, DTR-54X42X42 (Reducing tee): 54X42X42mm, DMTF-15-15X15 (Misaligned T-piece): 15-15X15mm, DTFZP-18-15X18 (Chassis tee joint): 18-15X18mm, DTFZP-22-15X22 (Chassis tee joint): 22-15X22mm, D4T-22X22X22X22 (Equal cross): 22X22X22X22mm, D4T-28X28X28X28 (Equal cross): 28X28X28X28mm, D4T-35X35X35X35 (Equal cross): 35X35X35X35mm, D4T-42X42X42X42 (Equal cross): 42X42X42X42mm, D4T-54X54X54X54 (Equal cross): 54X54X54X54mm, D4T-76.1X76.1X76.1X76.1 (Equal cross): 76.1X76.1X76.1X76.1mm, D4TR-28X22X28X22 (Reducing cross): 28X22X28X22mm, D4TR-35X22X35X22 (Reducing cross): 35X22X35X22mm, D4TR-35X28X35X28 (Reducing cross): 35X28X35X28mm, D4TR-42X22X42X22 (Reducing cross): 42X22X42X22mm, D4TR-42X28X42X28 (Reducing cross): 42X28X42X28mm, D4TR-42X35X42X35 (Reducing cross): 42X35X42X35mm, D4TR-54X22X54X22 (Reducing cross): 54X22X54X22mm, D4TR-54X28X54X28 (Reducing cross): 54X28X54X28mm, D4TR-54X35X54X35 (Reducing cross): 54X35X54X35mm, D4TR-54X42X54X42 (Reducing cross): 54X42X54X42mm, D4TF-22-20X22-20 (Female thread equal cross): 22-20X22-20mm, D4TF-28-25X28-25 (Female thread equal cross): 28-25X28-25mm, D4TF-35-32X35-32 (Female thread equal cross): 35-32X35-32mm, D4TF-42-40X42-40 (Female thread equal cross): 42-40X42-40mm, D4TRF-22-15X22-15 (reducing cross with female thread): 22-15X22-15mm, D4TRF-54-40X54-40 (reducing cross with female thread): 54-40X54-40mm. DDC-12 (End cap): 12mm, DDC-15 (End cap): 15mm, DDC-18 (End cap): 18mm, DDC-22 (End cap): 22mm, DDC-28 (End cap): 28mm, DDC-35 (End cap): 35mm, DDC-42 (End cap): 42mm, DDC-54 (End cap): 54mm, DDC-66.7 (End cap): 66.7mm, DDC-76.1 (End cap): 76.1mm, DDC-88.9 (End cap): 88.9mm, DDC-108 (End cap): 108mm. Pipe: DPX Series 1 DPX Series 2

Manufacturer:

Meide Archung (Jinan) Piping Industry Co., Ltd.

Company Name

Meide Archung (Jinan) Piping Industry Co., Ltd.

Address

No.49, Huxi Street North Side, Jinshui Subdistrict, Pingyin County, Jinan, Shandong

Country

China

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washer (Live joint with BSP female thread models only) for use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007086

Expiry date:

31/07/2025

Size:

15-108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

Kasinpress, size and material grade on fitting body. WRAS, Kasinpress, size, material grade, standard marking and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Model:

Fittings (SUS304 or 316L): Adapter 90 with BSP female thread: STP GM5016-1505, 15×Rp½. STP GM5016-1805, 18×Rp½. STP GM5016-22075, 22×Rp¾. Adapter with BSP MALE thread: STP GM5002-1505, 15×Rp½. STP GM5002-1805, 18×Rp½. STP GM5002-22075, 22×Rp¾. STP GM5002-281, 28×Rp1. STP GM5002-351025, 35×Rp1¼. STP GM5002-42105, 42×Rp1½. STP GM5002-542, 54×Rp2. Adapter with plain ending: STP GM5035-18, 18 STP GM5035-22, 22 STP GM5035-28, 28 Cap: STP GM5024-15, 15. STP GM5024-15, 18. STP GM5024-22, 22. STP GM5024-28, 28. STP GM5024-35, 35. STP GM5024-42, 42. STP GM5024-54, 54. STP GM5024-76, 76.1. STP GM5024-89, 88.9. STP GM5024-108, 108. Elbow 45 with press ending: STP GM5008-15, 15. STP GM5008-18, 18. STP GM5008-22, 22. STP GM5008-28, 28. STP GM5008-35, 35. STP GM5008-42, 42. STP GM5008-54, 54. STP GM5008-76, 76.1. STP GM5008-89, 88.9. STP GM5008-108, 108. Elbow 45 with plain ending: STP GM5009-15, 15. STP GM5009-18, 18. STP GM5009-22, 22. STP GM5009-28, 28. STP GM5009-35, 35. STP GM5009-42, 42. STP GM5009-54, 54. STP GM5009-76, 76.1. STP GM5009-89, 88.9. STP GM5009-108, 108. Elbow 90 with press ending: STP GM5006-15, 15. STP GM5006-18, 18. STP GM5006-22, 22. STP GM5006-28, 28. STP GM5006-35, 35. STP GM5006-42, 42. STP GM5006-54, 54. STP GM5006-76, 76.1. STP GM5006-89, 88.9. STP GM5006-108, 108. Elbow 90 with BSP female thread: STP GM5021-1505, 15×Rp½. STP GM5021-1805, 18×Rp½. STP GM5021-22075, 22×Rp¾. STP GM5021-281, 28×Rp1. STP GM5021-351024, 35×Rp1¼. STP GM5021-42105, 42×Rp1½. STP GM5021-542, 54×Rp2. Elbow 90 with BSP male thread STP GM5010-1505, 15×R½. STP GM5010-1805, 18×R½. STP GM5010-22075, 22×R¾ Elbow 90 with plain ending: STP GM5007-15, 15. STP GM5007-18, 18. STP GM5007-22, 22. STP GM5007-28, 28. STP GM5007-35, 35. STP GM5007-42, 42. STP GM5007-54, 54. STP GM5007-76, 76.1. STP GM5007-89, 88.9. STP GM5007-108, 108. Reducer coupler with plain ending: STP GM5005-1815, 18×15. STP GM5005-2218, 22×18. STP GM5005-2818, 28×18. STP GM5005-3522, 35×22. STP GM5005-3528, 35×28. STP GM5005-4222, 42×22. STP GM5005-4228, 42×28. STP GM5005-4235, 42×35. STP GM5005-5428, 54×28. STP GM5005-5435, 54×35. STP GM5005-5442, 54×42. Reducer Tee with press ending: STP GM5015-1815, 18×15×18. STP GM5015-2215, 22×15×22. STP GM5015-2218, 22×18×22. STP GM5015-2815, 28×15×28. STP GM5015-2818, 28×18×28. STP GM5015-2822, 28×22×28. STP GM5015-3522, 35×22×35. STP GM5015-3528, 35×28×35. STP GM5015-4222, 42×22×42. STP GM5015-4228, 42×28×42. STP GM5015-4235, 42×35×42. STP GM5015-5422, 54×22×54. STP GM5015-5428, 54×28×54. STP GM5015-5435, 54×35×54. STP GM5015-5442, 54×42×54. STP GM5015-7642, 76.1×42×76.1. STP GM5015-7654, 76.1×54×76.1. STP GM5015-8954, 88.9×54×88.9 STP GM5015-10854, 108×54×108. STP GM5015-10876, 108×76.1×108. STP GM5015-10889, 108×88.9×108 Different radius straight-way with press ending: STP GM5001-15, 15. STP GM5001-18, 18. STP GM5001-22, 22 STP GM5001-28, 28. STP GM5001-35, 35. STP GM5001-42, 42. STP GM5001-54, 54. STP GM5001-76, 76.1. STP GM5001-89, 88.9. STP GM5001-108, 108 Straight coupler with BSP male thread: STP GM5003-1505, 15×R½. STP GM5003-1805, 18×R½. STP GM5003-18075, 18×R¾. STP GM5003-2205, 22×R½, STP GM5003-22075, 22×R¾. STP GM5003-281, 28×R1. STP GM5003-351025, 35×R1¼. STP GM5003-42105, 42×R1½. STP GM5003-542, 54×R2. STP GM5003-76205, 76.1×R2½. STP GM5003-893, 88.9×R3. Straight coupler with press ending: STP GM5019-15, 15. STP GM5019-18, 18. STP GM5019-22, 22. STP GM5019-28, 28. STP GM5019-35, 35. STP GM5019-42, 42 STP GM5019-54, 54. Tee with press ending: STP GM5012-15, 15. STP GM5012-18, 18. STP GM5012-22, 22. STP GM5012-28, 28. STP GM5012-35, 35. STP GM5012-42, 42. STP GM5012-54, 54, STP GM5012-76, 76.1. STP GM5012-89, 88.9. STP GM5012-108, 108. Tee with BSP male thread: STP GM5013-1505, 15×R½. STP GM5013-1805, 18×R½. STP GM5013-2205, 22×R½. STP GM5013-22075, 22×R¾. STP GM5013-2805, 28×R½. STP GM5013-28075, 28×R¾. STP GM5013-281, 28×R1. STP GM5013-3505, 35×R½. STP GM5013-351025, 35×R1¼. STP GM5013-421025, 42×R1¼. STP GM5013-54105, 54×R1½. STP GM5013-542, 54×R2. Tee with BSP female thread: STP GM5014-1505, 15×Rp½. STP GM5014-1805, 18×Rp½. STP GM5014-2205, 22×Rp½. STP GM2014-22075, 22×Rp¾. STP GM2014-2805, 28×R½. STP GM2014-28075, 28×Rp¾. STP GM2014-281, 28×Rp1. STP GM2014-3505, 35×Rp½. STP GM2014-351024, 35×Rp1¼. STP GM2014-421025, 42×Rp1¼. STP GM2014-54105, 54×1½. STP GM2014-542, 54×Rp2. Live joint with BSP female thread: STP GM5004-1505, 15×Rp½. STP GM5004-1805, 18×Rp½. STP GM5004-18075, 18×Rp¾. STP GM5004-2205, 22×Rp½. STP GM5004-22075, 22×Rp¾. STP GM5004-221, 22×Rp1. STP GM5004-281, 28×Rp1. STP GM5004-351025, 35×Rp1¼. STP GM5004-421075, 42×Rp1¾. STP GM5004-542, 54×Rp2. Stainless steel pipe (SUS304 or 316L): *-STPT304 (SUS304). *-STP316L (316L). Where * = size in mm between 15 and 108, e.g. 15-STPT304 for 15mm SUS304 pipe.

Factor:

WENZHOU KASIN VALVE PIPE FITTING CO LTD

Company Name

WENZHOU KASIN VALVE PIPE FITTING CO LTD

Address

944 BINHAI ER AVENUE WENZHOU ECONOMIC TECHNOLOGICAL DEVELOPMENT ZONE

Postcode

CHINA

View All Listings by this Company

Range of JG Twist & Lock Speedfit push-fit fittings for use with JG Speedfit Layflat Polybutylene Barrier Pipe (BPB Pipe to BS EN 7291-2:2010), 'BPEX' Barrier Pipe.(BPEX Pipe to BS EN 7291-3:2010) and Copper Pipe to BS EN1057:2006 Max working pressure & operating temperature: 12.5 Bar at 20°C 6.0 Bar at 83°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310020

Expiry date:

31/10/2028

Size:

See models, note all sizes listed in mm are push-fit, all other size types are listed in the models themselves. Models for use with copper pipe are sized up to and including 22mm and no larger.

Marking:

Fittings: JG Logo & Size on collet. Manifolds: JG Logo & Size on Collet. JG Logo on Body. Pipe: JG Speedfit, operating parameters & other technical information on pipe.

Installation Requirements:

R001 R008

Model:

EQUAL STRAIGHT CONNECTOR PEM0410W, 10mm EQUAL STRAIGHT CONNECTOR PEM0415W, 15mm EQUAL STRAIGHT CONNECTOR PEM0422W, 22mm EQUAL STRAIGHT CONNECTOR PEM0428W, 28mm EQUAL STRAIGHT CONNECTOR REDUCING STRAIGHT CONNECTOR PEM201510W, 15mm x 10mm REDUCING STRAIGHT CONNECTOR PEM202215W, 22mm x 15mm REDUCING STRAIGHT CONNECTOR REDUCER PEM061510W, 15mm x 10mm REDUCER PEM062215W, 22mm x 15mm REDUCER PEM062815W, 28mm x 15mm REDUCER PEM062822W, 28mm x 22mm REDUCER, EQUAL ELBOW PEM0310W, 10mm EQUAL ELBOW, PEM0315W, 15mm EQUAL ELBOW, PEM0322W, 22mm EQUAL ELBOW, PEM0328W, 28mm EQUAL ELBOW, REDUCING ELBOW PEM211510W, 15mm x10mm REDUCING ELBOW PEM212215W, 22mm x15mm REDUCING ELBOW STEM ELBOW PEM571515W, 15mm 135° STEM ELBOW, PEM572222W, 22mm 135° STEM ELBOW, STEM ELBOW PEM221010W, 10mm x 10mm STEM ELBOW PEM221015W, 10mm x 15mm STEM ELBOW PEM221515W, 15mm x 15mm STEM ELBOW PEM222222W, 22mm x 22mm STEM ELBOW EQUAL TEE PEM0210W, 10mm EQUAL TEE PEM0215W, 15mm EQUAL TEE PEM0222W, 22mm EQUAL TEE PEM0228W, 28mm EQUAL TEE REDUCING TEE PEM3015BW, 15mm x 10mm x 10mm REDUCING TEE PEM3015AW, 15mm x 15mm x 10mm REDUCING TEE PEM3022CW, 15mm x 15mm x 22mm REDUCING TEE PEM3022BW, 22mm x 15mm x 15mm REDUCING TEE PEM3022DW, 22mm x 15mm x 22mm REDUCING TEE PEM302210AW, 22mm x 22mm x 10mm REDUCING TEE PEM3022AW, 22mm x 22mm x 15mm REDUCING TEE PEM3028BW, 28mm x 22mm x 22mm REDUCING TEE PEM3028DW, 28mm x 22mm x 28mm REDUCING TEE PEM302810AW, 28mm x 28mm x 10mm REDUCING TEE PEM302815AW, 28mm x 28mm x 15mm REDUCING TEE PEM3028AW, 28mm x 28mm x 22mm REDUCING TEE STEM TEE PEM532210W, 22mm x 22mm x 10mm STEM TEE PEM532215W, 22mm x 22mm x 15mm STEM TEE STRAIGHT TAP CONNECTOR, PEMSTC1014, 10mm x 1/2" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC1514, 15mm x 1/2" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC1516, 15mm x 3/4" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC2216, 22mm x 3/4" BSP Captive Nut STRAIGHT TAP CONNECTOR BENT TAP CONNECTOR PEMBTC1014, 10mm x 1/2" BSP Captive Nut BENT TAP CONNECTOR PEMBTC1514, 15mm x 1/2" BSP Captive Nut BENT TAP CONNECTOR

PIPE REPAIR KIT, 15RKP, 15mm PIPE REPAIR KIT 22RKP, 22mm PIPE REPAIR KIT SLIP TEE CONNECTOR 15TKP, 15mm SLIP TEE CONNECTOR 22TKP, 22mm SLIP TEE CONNECTOR, PLUG PL10, 10mm PLUG, PL15, 15mm PLUG, PL22, 22mm PLUG, PL28, 28mm PLUG, PIPE INSERTS TSM10N, 10mm PIPE INSERTS TSM15N, 15mm PIPE INSERTS TSM22N, 22mm PIPE INSERTS TSM28N, 28mm PIPE INSERTS SUPERSEAL PIPE INSERTS STS10, 10mm SUPERSEAL PIPE INSERTS STS15, 15mm SUPERSEAL PIPE INSERTS STS22, 22mm SUPERSEAL PIPE INSERTS STS28, 28mm SUPERSEAL PIPE INSERTS LAYFLAT POLYBUTYLENE BARRIER PIPE (COILS) 10BPB-25C, 10mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C, 10mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C, 10mm x 100M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C, 15mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C, 15mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C, 15mm x 85M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C, 15mm x 100M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C, 15mm x 120M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C, 15mm x 150M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C, 15mm x 300M LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C 22mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C 22mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C, 28mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS & LENGTHS) 10BPEX-25C, 10mm x 25M WHITE PEX BARRIER PIPE 10BPEX-50C, 10mm x 50M WHITE PEX BARRIER PIPE 10BPEX-100C, 10mm x 100M WHITE PEX BARRIER PIPE 15BPEX-25C, 15mm x 25M WHITE PEX BARRIER PIPE 15BPEX-50C, 15mm x 50M WHITE PEX BARRIER PIPE 15BPEX-100C, 15mm x 100M WHITE PEX BARRIER PIPE 15BPEX-120C, 15mm x 120M WHITE PEX BARRIER PIPE 15BPEX-150C, 15mm x 150M WHITE PEX BARRIER PIPE 22BPEX-25C, 22mm x 25M WHITE PEX BARRIER PIPE 22BPEX-50C, 22mm x 50M WHITE PEX BARRIER PIPE 15BPEX-20X2L, 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L, 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L, 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L, 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L, 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L, 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L, 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L, 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE Manifolds: PEM522210W 22MM X 10MM 4 PORT MANIFOLD PEM522210WP 22MM X 10MM 4 PORT MANIFOLD PEM522215W 22MM X 15MM 4 PORT MANIFOLD PEM522215WP 22MM X 15MM 4 PORT MANIFOLD PEM582210AW 22MM X 10MM 2 PORT MANIFOLD W/ STEM PEM582210AWP 22MM X 10MM 2 PORT MANIFOLD W/ STEM PEM582215AW 22MM X 15MM 2 PORT MANIFOLD W/ STEM PEM582215AWP 22MM X 15MM 2 PORT MANIFOLD W/ STEM PEM582215BW 22MM X 15MM 3 PORT MANIFOLD W/ STEM PEM582215BWP 22MM X 15MM 3 PORT MANIFOLD W/ STEM PEM582215CW 22MM X 15MM 4 PORT MANIFOLD W/ STEM PEM582215CWP 22MM X 15MM 4 PORT MANIFOLD W/ STEM

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

‘Atlas & Flowtech’ range of green fusion welded polypropylene fittings for use with ‘Atlas & Flowtech’ PPRGF or PPR pipes. Maximum working pressure 20.0 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310089

Expiry date:

31/10/2028

Size:

Please refer to models.

Marking:

Atlas UAE logo & product information on body of fittings. Modern Plastic Industry, Atlas & technical information on pipe.

Installation Requirements:

R001

Model:

APE90XX = ELBOW 90° XX mm APE9020 = ELBOW 90° 20 MM APE9025 = ELBOW 90° 25 MM APE9032 = ELBOW 90° 32 MM APE9040 = ELBOW 90° 40 MM APE9050 = ELBOW 90° 50 MM APE9063 = ELBOW 90° 63 MM APE9075 = ELBOW 90° 75 MM APE9090 = ELBOW 90° 90 MM APE90110 = ELBOW 90° 110 MM APE45XX = ELBOW 45° XX mm APE4520 = ELBOW 45° 20 MM APE4525 = ELBOW 45° 25 MM APE4532 = ELBOW 45° 32 MM APE4540 = ELBOW 45° 40 MM APE4550 = ELBOW 45° 50 MM APE4563 = ELBOW 45° 63 MM APE4575 = ELBOW 45° 75 MM APE4590 = ELBOW 45° 90 MM APE45110 = ELBOW 45° 110 MM APTXX = TEE XX mm APT20 = TEE 20 MM APT25 = TEE 25 MM APT32 = TEE 32 MM APT40 = TEE 40 MM APT50 = TEE 50 MM APT63 = TEE 63 MM APT75 = TEE 75 MM APT90 = TEE 90 MM APT110 = TEE 110 MM APSXX = SOCKET XX mm APS20 = SOCKET 20 MM APS25 = SOCKET 25 MM APS32 = SOCKET 32 MM APS40 = SOCKET 40 MM APS50 = SOCKET 50 MM APS63 = SOCKET 63 MM APS75 = SOCKET 75 MM APS90 = SOCKET 90 MM APS110 = SOCKET 110 MM APECXX = END CAP XX mm APEC20 = END CAP 20 MM APEC25 = END CAP 25 MM APEC32 = END CAP 32 MM APEC40 = END CAP 40 MM APEC50 = END CAP 50 MM APEC63 = END CAP 63 MM APEC75 = END CAP 75 MM APEC90 = END CAP 90 MM APEC110 = END CAP 110 MM APRTXXxXXxXX = REDUCING TEE XXxXXxXX mm APRT20X25X20 = REDUCING TEE 20X25X20 MM APRT25X20X20 = REDUCING TEE 25X20X20 MM APRTXXxXX = Reducing Tee XXxXXxXX mm APRT25X20 = REDUCING TEE 25X20X25 MM APRT32X20 = REDUCING TEE 32X20X32 MM APRT25X32 = REDUCING TEE 32X25X25 MM APRT32X25 = REDUCING TEE 32X25X32 MM APRT40X20 = REDUCING TEE 40X20X40 MM APRT40X25 = REDUCING TEE 40X25X40 MM APRT40X32 = REDUCING TEE 40X32X40 MM APRT50X20 = REDUCING TEE 50X20X50 MM APRT50X25 = REDUCING TEE 50X25X50 MM APRT50X32 = REDUCING TEE 50X32X50 MM APRT50X40 = REDUCING TEE 50X40X50 MM APRT63X20 = REDUCING TEE 63X20X63 MM APRT63X25 = REDUCING TEE 63X25X63 MM APRT63X32 = REDUCING TEE 63X32X63 MM APRT63X40 = REDUCING TEE 63X40X63 MM APRT63X50 = REDUCING TEE 63X50X63 MM APRT75X32 = REDUCING TEE 75X32X75 MM APRT75X40 = REDUCING TEE 75X40X75 MM APRT75X50 = REDUCING TEE 75X50X75 MM APRT75X63 = REDUCING TEE 75X63X75 MM APRT90X40 = REDUCING TEE 90X40X90 MM APRT90X50 = REDUCING TEE 90X50X90 MM APRT90X63 = REDUCING TEE 90X63X90 MM APRT90X75 = REDUCING TEE 90X75X90 MM APRT110X63 = REDUCING TEE 110X63X110 MM APRT110X75 = REDUCING TEE 110X75X110 MM APRT110X90 = REDUCING TEE 110X90X110 MM APRXXxXX = REDUCER XXxXX mm APR25X20 = REDUCER 25X20 MM APR32X20 = REDUCER 32X20 MM APR32X25 = REDUCER 32X25 MM APR40X20 = REDUCER 40X20 MM APR40X25 = REDUCER 40X25 MM APR40X32 = REDUCER 40X32 MM APR50X20 = REDUCER 50X20 MM APR50X25 = REDUCER 50X25 MM APR50X32 = REDUCER 50X32 MM APR50X40 = REDUCER 50X40 MM APR63X20 = REDUCER 63X20 MM APR63X25 = REDUCER 63X25 MM APR63X32 = REDUCER 63X32 MM APR63X40 = REDUCER 63X40 MM APR63X50 = REDUCER 63X50 MM APR75X40 = REDUCER 75X40 MM APR75X50 = REDUCER 75X50 MM APR75X63 = REDUCER 75X63 MM APR90X50 = REDUCER 90X50 MM APR90X63 = REDUCER 90X63 MM APR90X75 = REDUCER 90X75 MM APR110X63 = REDUCER 110X63 MM APR110X75 = REDUCER 110X75MM APR110X90 = REDUCER 110X90 MM APEPXX = END PLUG XX” BSP (M) APEP0.5 = END PLUG 1/2" APEP0.75 = END PLUG 3/4" APEP1 = END PLUG 1" APCTXX = CROSS TEE XX mm APCT20 = CROSS TEE 20 MM APCT25 = CROSS TEE 25 MM APCT32 = CROSS TEE 32 MM PUSXX = UNION STUB XX mm PUS20 = UNION STUB 20MM PUS25 = UNION STUB 25MM PUS32 = UNION STUB 32MM PUS40 = UNION STUB 40MM PUS50 = UNION STUB 50MM PUS63 = UNION STUB 63MM APPBXX = PIPE BRACKET XX mm APPB20 = PIPE BRACKET 20 MM APPB25 = PIPE BRACKET 25 MM APPB32 = PIPE BRACKET 32 MM APCOSXX = CROSS OVER XX mm APCOS20 = CROSS OVER 20 MM APCOS25 = CROSS OVER 25 MM APCOS32 = CROSS OVER 32 MM APUXX = PLASTIC UNION XX mm APU20 = PLASTIC UNION 20 MM APU25 = PLASTIC UNION 25 MM APU32 = PLASTIC UNION 32 MM APCOXX = CROSS OVER SMALL XX mm APCO20 = CROSS OVER SMALL 20 MM APCO25 = CROSS OVER SMALL 25 MM APCO32 = CROSS OVER SMALL 32 MM APSTXX = FLANGE STUB XX mm APST63 = FLANGE STUB 63 MM APST75 = FLANGE STUB 75 MM APST90 = FLANGE STUB 90 MM APST110 = FLANGE STUB 110 MM APEPLXX = END PLUG LONG XX” BSP (M) APEPL0.5 = END PLUG LONG ½'' APEPL0.75 = END PLUG LONG ¾'' APFTXXxXX = FEM. TEE TRANSITION XXmm x XX” BSP (F) APFT20X0.5 = FEM. TEE TRANSITION 20X1/2" BSP APFT20X0.75 = FEM. TEE TRANSITION 20X3/4" BSP APFT25X0.5 = FEM. TEE TRANSITION 25X1/2" BSP APFT25X0.75 = FEM. TEE TRANSITION 25X3/4" BSP APFT32X0.5 = FEM. TEE TRANSITION 32X1/2" BSP APFT32X0.75 = FEM. TEE TRANSITION 32X3/4" BSP APFT32X1 = FEM. TEE TRANSITION 32X1" BSP APFE20X0.5 = FEM. ELBOW TRANSITION 20X1/2" BSP APFE20X0.75 = FEM. ELBOW TRANSITION 20X3/4" BSP APFE25X0.5 = FEM. ELBOW TRANSITION 25X1/2" BSP APFE25X0.75 = FEM. ELBOW TRANSITION 25X3/4" BSP APFE32X0.5 = FEM. ELBOW TRANSITION 32X1/2" BSP APFE32X0.75 = FEM. ELBOW TRANSITION 32X3/4" BSP APFE32X1 = FEM. ELBOW TRANSITION 32X1" BSP APFSXXxXX = FEM. SOCKET TRANSITION XXmm x XX” BSP (F) APFS20X0.5 = FEM. SOCKET TRANSITION 20X1/2" BSP APFS20X0.75 = FEM. SOCKET TRANSITION 20X3/4" BSP APFS25X0.5 = FEM. SOCKET TRANSITION 25X1/2' BSP APFS25X0.75 = FEM. SOCKET TRANSITION 25X3/4" BSP APFS32X0.5 = FEM. SOCKET TRANSITION 32X1/2" BSP APFS32X0.75 = FEM. SOCKET TRANSITION 32X3/4" BSP APFHSXXxX = FEM. HEX SOCKET TRANSITION XXmm x XX BSP (F) APFHS32X1 = FEM. HEX SOCKET TRANSITION 32X1" BSP APFHS40X1 = FEM. HEX SOCKET TRANSITION 40X1" BSP APFHS40X1.25 = FEM. HEX SOCKET TRANSITION 40X11/4" BSP APFHS50X1.5 = FEM. HEX SOCKET TRANSITION 50X11/2" BSP APFHS63X2 = FEM. HEX SOCKET TRANSITION 63X2" BSP APFHS75X2.5 = FEM. HEX SOCKET TRANSITION 75X21/2" BSP APFHS90X3 = FEM. HEX SOCKET TRANSITION 90X3" BSP APFHS110X4 = FEMALE HEX SOCKET TRANSITION 110X4'' APMSXXxXX = MALE SOCKET TRANSITION XXmm x XX BSP (M) APMS20X0.5 = MALE SOCKET TRANSITION 20X1/2" APMS20X0.75 = MALE SOCKET TRANSITION 20X3/4" APMS25X0.5 = MALE SOCKET TRANSITION 25X1/2" APMS25X0.75 = MALE SOCKET TRANSITION 25X3/4" APMS32X0.5 = MALE SOCKET TRANSITION 32X1/2'' APMS32X0.75 = MALE SOCKET TRANSITION 32X3/4" APMHSXXxX = MALE HEX SOCKET TRANSITION XXmm x XX BSP (M) APMHS32X1 = MALE HEX SOCKET TRANSITION 32X1" APMHS40X1 = MALE HEX SOCKET TRANSITION 40X1" APMHS40X1.25 = MALE HEX SOCKET TRANSITION 40X11/4" APMHS50X1.5 = MALE HEX SOCKET TRANSITION 50X1.1/2" APMHS63X2 = MALE HEX SOCKET TRANSITION 63X2" APMHS75X2.5 = MALE HEX SOCKET TRANSITION 75X2.1/2" APMHS90X3 = MALE HEX SOCKET TRANSITION 90X3" APT = MALE HEX SOCKET TRANSITION XXmm x XX BSP (M) APT = MALE HEX SOCKET TRANSITION 110X4'' APMEXXxXX = MALE ELBOW TRANSITION XXmm x XX BSP (M) APME20X0.5 = MALE ELBOW TRANSITION 20X1/2" APME20X0.75 = MALE ELBOW TRANSITION 20X3/4" APME25X0.5 = MALE ELBOW TRANSITION 25X1/2' APME25X0.75 = MALE ELBOW TRANSITION 25X3/4" APME32X0.5 = MALE ELBOW TRANSITION 32X1/2" APME32X0.75 = MALE ELBOW TRANSITION 32X3/4" APME32X1 = MALE ELBOW TRANSITION 32X1" APVBXXxXX = VALVE BODY XXmm x XX BSP (M) APVB20X0.75 = VALVE BODY 20X3/4" APVB25X0.75 = VALVE BODY 25X3/4" APVB32X1 = VALVE BODY 32X1" APWMEXXxXX = WALL MOUNT ELBOW XXmm x XX BSP (M) APWME20X0.5 = WALL MOUNT ELBOW 20X1/2" APWME25X0.5 = WALL MOUNT ELBOW 25X1/2" APWME25X0.75 = WALL MOUNT ELBOW 25X3/4" APWMGXXxXX = WALL MOUNT GROUP XXmm x XX BSP (M) APWMG25X0.5 = WALL MOUNT GROUP 25X1/2" SDR6 Polypropylene Random Pipes: A20X3.4 SD6 = PPR PIPE 20X3.4 MM SDR 6 4 MTR PN 20 A25X4.2 SD6 = PPR PIPE 25X4.2 MM SDR 6 4 MTR PN 20 A32X5.4 SD6 = PPR PIPE 32X5.4 MM SDR 6 4 MTR PN 20 A40X6.7 SD6 = PPR PIPE 40X6.7 MM SDR 6 4 MTR PN 20 A50X8.3 SD6 = PPR PIPE 50X8.3 MM SDR 6 4 MTR PN 20 A63X10.5 SD6 = PPR PIPE 63X10.5 MM SDR 6 4 MTR PN 20 A75X12.5 SD6 = PPR PIPE 75X12.5 MM SDR 6 4 MTR PN 20 A90X15.0 SD6 = PPR PIPE 90X15.0 MM SDR 6 4 MTR PN 20 A110X18.3 SD6 = PPR PIPE 110X18.3 MM SDR 6 4 MTR PN 20 SDR7.4 Polypropylene Random Pipes: A20X2.8 SD7.4 = PPR PIPE 20X2.8 MM SDR 7.4 4 MTR PN 16 A25X3.5 SD7.4 = PPR PIPE 25X3.5 MM SDR 7.4 4 MTR PN 16 A32X4.4 SD7.4 = PPR PIPE 32X4.4 MM SDR 7.4 4 MTR PN 16 A40X5.5 SD7.4 = PPR PIPE 40X5.5 MM SDR 7.4 4 MTR PN 16 A50X6.9 SD7.4 = PPR PIPE 50X6.9 MM SDR 7.4 4 MTR PN 16 A63X8.6 SD7.4 = PPR PIPE 63X8.6 MM SDR 7.4 4 MTR PN 16 A75X10.3 SD7.4 = PPR PIPE 75X10.3 MM SDR 7.4 4 MTR PN 16 A90X12.3 SD7.4 = PPR PIPE 90X12.3 MM SDR 7.4 4 MTR PN 16 A110X15.1 SD7.4 = PPR PIPE 110X15.1 MM SDR 7.4 4 MTR PN 16 SDR6 Polypropylene Random Glass Fibre Pipes: AGF20X3.4 SD6 = PPRGF PIPE 20X3.4 MM SDR 6 4 MTR AGF25X4.2 SD6 = PPRGF PIPE 25X4.2 MM SDR 6 4 MTR AGF32X5.4 SD6 = PPRGF PIPE 32X5.4 MM SDR 6 4 MTR AGF40X6.7 SD6 = PPRGF PIPE 40X6.7 MM SDR 6 4 MTR AGF50X8.3 SD6 = PPRGF PIPE 50X8.3 MM SDR 6 4 MTR AGF63X10.5 SD6 = PPRGF PIPE 63X10.5 MM SDR 6 4 MTR AGF75X12.5 SD6 = PPRGF PIPE 75X12.5 MM SDR 6 4 MTR AGF90X15.0 SD6 = PPRGF PIPE 90X15.0 MM SDR 6 4 MTR AGF110X18.3 SD6 = PPRGF PIPE 110X18.3 MM SDR 6 4 MTR SDR7.4 Polypropylene Random Glass Fibre Pipes: AGF20X2.8 SD7.4 = PPRGF PIPE 20X2.8 MM SDR 7.4 4 MTR AGF25X3.5 SD7.4 = PPRGF PIPE 25X3.5 MM SDR 7.4 4 MTR AGF32X4.4 SD7.4 = PPRGF PIPE 32X4.4 MM SDR 7.4 4 MTR AGF40X5.5 SD7.4 = PPRGF PIPE 40X5.5 MM SDR 7.4 4 MTR AGF50X6.9 SD7.4 = PPRGF PIPE 50X6.9 MM SDR 7.4 4 MTR AGF63X8.6 SD7.4 = PPRGF PIPE 63X8.6 MM SDR 7.4 4 MTR AGF75X10.3 SD7.4 = PPRGF PIPE 75X10.3 MM SDR 7.4 4 MTR AGF90X12.3 SD7.4 = PPRGF PIPE 90X12.3 MM SDR 7.4 4 MTR AGF110X15.1 SD7.4 = PPRGF PIPE 110X15.1 MM SDR 7.4 4 MTR

Manufacturer:

Modern Plastic Industry LLC

Company Name

Modern Plastic Industry LLC

Address

Dubai Investment Park, PO Box No. 31550, Dubai

Country

United Arab Emirates

View All Listings by this Company

‘F18’ range of brass press fittings (TH and U crimp profiles) with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310918

Expiry date:

31/10/2028

Size:

40mm, 50mm, 63mm & 75mm.

Marking:

Fittings: RIFENG, size, date of manufacture (YYYY/MM) on crimp sleeve. Pipe: RIFENG, size, date of manufacture and time (YYYYMMDDHHMMSS) and batch number on pipe.

Installation Requirements:

R001

Model:

B1 multilayer PEX/AL/PEX pipe: B1-3240, B1-4150, B1-5163, B1-6075. F18 press fittings: F18 Equal straight union: F18-S3240x3240, F18-S4150x4150, F18-S5163x5163, F18-S6075x6075. F18 Reducer: F18-S3240x1620, F18-S3240x2025, F18-S3240x2632, F18-S4150x2025, F18-S4150x2632, F18-S4150x3240, F18-S5163x2632, F18-S5163x3240, F18-S5163x4150, F18-S6075x3240, F18-S6075x4150, F18-S6075x5163. F18 Equal elbow: F18-L3240x3240, F18-L4150x4150, F18-L5163x5163, F18-L6075x6075. F18 Equal elbow (45°): F18-L3240x3240 (45°), F18-L4150x4150 (45°), F18-L5163x5163 (45°), F18-L6075x6075 (45°). F18 Equal tee: F18-T3240x3240x3240, F18-T4150x4150x4150, F18-T5163x5163x5163, F18-T6075x6075x6075. F18 Unequal tee: F18-T3240x1216x3240, F18-T3240x1620x3240, F18-T3240x2025x2632, F18-T3240x2025x3240, F18-T3240x2632x2632, F18-T3240x2632x3240, F18-T3240x4150x3240, F18-T4150x1620x4150, F18-T4150x2025x3240, F18-T4150x2025x4150, F18-T4150x2632x4150, F18-T4150x3240x4150, F18-T5163x2025x5163, F18-T5163x2632x5163, F18-T5163x3240x5163, F18-T5163x4150x5163, F18-T6075x2632x6075, F18-T6075x3240x6075, F18-T6075x4150x6075, F18-T6075x5163x6075. F18 Male straight union: F18-S3240x1 1/2, F18-S3240x1 1/4, F18-S3240x1, F18-S4150x1 1/2, F18-S4150x2, F18-S5163x1 1/2, F18-S5163x2, F18-S6075x2 1/2. F18 Female straight union: F18-S3240x1 1/2F, F18-S3240x1 1/4F, F18-S4150x1 1/2F, F18-S5163x2F, F18-S6075x2 1/2F. F18 Male elbow: F18-L3240x1 1/4, F18-L3240x1 1/2, F18-L4150x1 1/2, F18-L5163x2, F18-L6075x2 1/2. F18 Female elbow: F18-L3240x1 1/4F, F18-L3240x1 1/2F, F18-L4150x1 1/2F, F18-L5163x2F, F18-L6075x2 1/2F. F18 Male tee: F18-T3240x1/2x3240, F18-T3240x1x3240, F18-T3240x3/4x3240, F18-T3240x1 1/4x3240, F18-T4150x1 1/2x4150, F18-T4150x1/2x4150, F18-T4150x3/4x4150, F18-T4150x1x4150, F18-T5163x1/2x5163, F18-T5163x1x5163, F18-T5163x2x5163, F18-T5163x3/4x5163. F18 Female tee: F18-T3240x1/2Fx3240, F18-T3240x3/4Fx3240, F18-T3240x1Fx3240, F18-T3240x1 1/4Fx3240, F18-T4150x1/2Fx4150, F18-T4150x3/4Fx4150, F18-T4150x1Fx4150, F18-T4150x1 1/2Fx4150, F18-T5163x1/2Fx5163, F18-T5163x3/4Fx5163, F18-T5163x1Fx5163, F18-T5163x2Fx5163, F18-T6075x1Fx6075, F18-T6075x1 1/2Fx6075, F18-T6075x2Fx6075, F18-T6075x2 1/2Fx6075. F18 End cap: F18-D3240, F18-D4150, F18-D5163, F18-D6075.

Factor:

Rifeng Enterprise Group Co., Ltd.

Company Name

Rifeng Enterprise Group Co., Ltd.

Address

5th/F of Rifeng Building, 16 Zumiao Rd, Foshan, 528000 GUANGDONG

Country

China

View All Listings by this Company

Range of brass press fittings (TH and U crimp profiles) with EPDM ‘O’-rings for use with RIIFO B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310922

Expiry date:

31/10/2028

Size:

40mm, 50mm, 63mm & 75mm.

Marking:

Fittings: RIIFO & size ON BODY. Pipe: RIIFO, WRAS, size, date of manufacture and time (YYYYMMDDHHMMSS) and batch number on pipe.

Installation Requirements:

R001

Model:

B1 multilayer PEX/AL/PEX pipe: B1-3240, B1-4150, B1-5163, B1-6075. F18 press fittings: F18 Equal straight union: F18-S3240x3240, F18-S4150x4150, F18-S5163x5163, F18-S6075x6075. F18 Reducer: F18-S3240x1620, F18-S3240x2025, F18-S3240x2632, F18-S4150x2025, F18-S4150x2632, F18-S4150x3240, F18-S5163x2632, F18-S5163x3240, F18-S5163x4150, F18-S6075x3240, F18-S6075x4150, F18-S6075x5163. F18 Equal elbow: F18-L3240x3240, F18-L4150x4150, F18-L5163x5163, F18-L6075x6075. F18 Equal elbow (45°): F18-L3240x3240 (45°), F18-L4150x4150 (45°), F18-L5163x5163 (45°), F18-L6075x6075 (45°). F18 Equal tee: F18-T3240x3240x3240, F18-T4150x4150x4150, F18-T5163x5163x5163, F18-T6075x6075x6075. F18 Unequal tee: F18-T3240x1216x3240, F18-T3240x1620x3240, F18-T3240x2025x2632, F18-T3240x2025x3240, F18-T3240x2632x2632, F18-T3240x2632x3240, F18-T3240x4150x3240, F18-T4150x1620x4150, F18-T4150x2025x3240, F18-T4150x2025x4150, F18-T4150x2632x4150, F18-T4150x3240x4150, F18-T5163x2025x5163, F18-T5163x2632x5163, F18-T5163x3240x5163, F18-T5163x4150x5163, F18-T6075x2632x6075, F18-T6075x3240x6075, F18-T6075x4150x6075, F18-T6075x5163x6075. F18 Male straight union: F18-S3240x1 1/2, F18-S3240x1 1/4, F18-S3240x1, F18-S4150x1 1/2, F18-S4150x2, F18-S5163x1 1/2, F18-S5163x2, F18-S6075x2 1/2. F18 Female straight union: F18-S3240x1 1/2F, F18-S3240x1 1/4F, F18-S4150x1 1/2F, F18-S5163x2F, F18-S6075x2 1/2F. F18 Male elbow: F18-L3240x1 1/4, F18-L3240x1 1/2, F18-L4150x1 1/2, F18-L5163x2, F18-L6075x2 1/2. F18 Female elbow: F18-L3240x1 1/4F, F18-L3240x1 1/2F, F18-L4150x1 1/2F, F18-L5163x2F, F18-L6075x2 1/2F. F18 Male tee: F18-T3240x1/2x3240, F18-T3240x1x3240, F18-T3240x3/4x3240, F18-T3240x1 1/4x3240, F18-T4150x1 1/2x4150, F18-T4150x1/2x4150, F18-T4150x3/4x4150, F18-T4150x1x4150, F18-T5163x1/2x5163, F18-T5163x1x5163, F18-T5163x2x5163, F18-T5163x3/4x5163. F18 Female tee: F18-T3240x1/2Fx3240, F18-T3240x3/4Fx3240, F18-T3240x1Fx3240, F18-T3240x1 1/4Fx3240, F18-T4150x1/2Fx4150, F18-T4150x3/4Fx4150, F18-T4150x1Fx4150, F18-T4150x1 1/2Fx4150, F18-T5163x1/2Fx5163, F18-T5163x3/4Fx5163, F18-T5163x1Fx5163, F18-T5163x2Fx5163, F18-T6075x1Fx6075, F18-T6075x1 1/2Fx6075, F18-T6075x2Fx6075, F18-T6075x2 1/2Fx6075. F18 End cap: F18-D3240, F18-D4150, F18-D5163, F18-D6075.

Factor:

RIIFO UK LTD

Company Name

RIIFO UK LTD

Address

Spear House, Burntwood Business Park, Cobbett Road, Burntwood, Staffordshire

Postcode

WS7 3GR

View All Listings by this Company

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with Mingshi (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304345

Expiry date:

30/04/2028

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Mingshi and size on body. Pipe: Mingshi, Mingshi logo, WRAS, size, length, temperature, pressure, date of manufacture (DD/MM/YYYY) and ISO standard on pipe.

Installation Requirements:

R001

Model:

Straight: M-1-0101-U (S1216) - 16mm, M-1-0102-U (S1418) - 18mm, M-1-0103-U (S1620) - 20mm, M-1-0104-U (S2025) - 25mm, M-1-0109-U (S2026) - 26mm, M-1-0105-U (S2632) - 32mm. Reduced straight: M-1-0202-U (S20*16) - 20x16mm, M-1-0203-U (S20*18) - 20x18mm, M-1-0204-U (S25*16) - 25x16mm, M-1-0205-U (S25*18) - 25x18mm, M-1-0206-U (S25*20) - 25x20mm, M-1-0223-U (S26*16) - 26x16mm, M-1-0224-U (S26*18) - 26x18mm, M-1-0225-U (S26*20) - 26x20mm, M-1-0222-U (S32*16) - 32x16mm, M-1-0226-U (S32*18) - 32x18mm, M-1-0207-U (S32*20) - 32x20mm, M-1-0208-U (S32*25) - 32x25mm, M-1-0227-U (S32*26) - 32x26mm. Male straight: M-1-0301-U (S16*1/2"M) - 16mmx1/2"M, M-1-0302-U (S16*3/4"M) - 16mmx3/4"M, M-1-0303-U (S18*1/2"M) - 18mmx1/2"M, M-1-0304-U (S18*3/4"M) - 18mmx3/4"M, M-1-0305-U (S20*1/2"M) - 20mmx1/2"M, M-1-0306-U (S20*3/4"M) - 20mmx3/4"M, M-1-0307-U (S20*1"M) - 20mmx1"M, M-1-0308-U (S25*1/2"M) - 25mmx1/2"M, M-1-0309-U (S25*3/4"M) - 25mmx3/4"M, M-1-0310-U (S25*1"M) - 25mmx1"M, M-1-0326-U (S26*1/2"M) - 26mmx1/2"M, M-1-0327-U (S26*3/4"M) - 26mmx3/4"M, M-1-0328-U (S26*1"M) - 26mmx1"M, M-1-0311-U (S32*1/2"M) - 32mmx1/2"M, M-1-0312-U (S32*3/4"M) - 32mmx3/4"M, M-1-0313-U (S32*1"M) - 32mmx1"M, M-1-0314-U (S32*11/4"M) - 32mmx1-1/4"M, M-1-0315-U (S32*11/2"M) - 32mmx1-1/2"M. Female straight: M-1-0401-U (S16*1/2"F) - 16mmx1/2"F, M-1-0402-U (S16*3/4"F) - 16mmx3/4"F, M-1-0403-U (S16*1"F) - 16mmx1"F, M-1-0404-U (S18*1/2"F) - 18mmx1/2"F, M-1-0405-U (S18*3/4"F) - 18mmx3/4"F, M-1-0407-U (S20*1/2"F) - 20mmx1/2"F, M-1-0408-U (S20*3/4"F) - 20mmx3/4"F, M-1-0409-U (S20*1"F) - 20mmx1"F, M-1-0410-U (S25*1/2"F) - 25mmx1/2"F, M-1-0411-U (S25*3/4"F) - 25mmx3/4"F, M-1-0412-U (S25*1"F) - 25mmx1"F, M-1-0422-U (S26*1/2"F) - 26mmx1/2"F, M-1-0423-U (S26*3/4"F) - 26mmx3/4"F, M-1-0424-U (S26*1"F) - 26mmx1"F, M-1-0413-U (S32*1/2"F) - 32mmx1/2"F, M-1-0414-U (S32*3/4"F) - 32mmx3/4"F, M-1-0415-U (S32*1"F) - 32mmx1"F, M-1-0416-U (S32*11/4"F) - 32mmx1-1/4"F, M-1-0417-U (S32*11/2"F) - 32mmx1-1/2"F. Elbow: M-1-0501-U (L1216) - 16mm, M-1-0502-U (L1418) - 18mm, M-1-0503-U (L1620) - 20mm, M-1-0504-U (L2025) - 25mm, M-1-0509-U (L2026) - 26mm, M-1-0505-U (L2632) - 32mm. Male elbow: M-1-0801-U (L16*1/2"M) - 16mmx1/2"M, M-1-0802-U (L16*3/4"M) - 16mmx3/4"M, M-1-0803-U (L18*1/2"M) - 18mmx1/2"M, M-1-0804-U (L18*3/4"M) - 18mmx3/4"M, M-1-0805-U (L20*1/2"M) - 20mmx1/2"M, M-1-0806-U (L20*3/4"M) - 20mmx3/4"M, M-1-0813-U (L20*1"M) - 20mmx1"M, M-1-0807-U (L25*1/2"M) - 25mmx1/2"M, M-1-0808-U (L25*3/4"M) - 25mmx3/4"M, M-1-0809-U (L25*1"M) - 25mmx1"M, M-1-0815-U (L26*1/2"M) - 26mmx1/2"M, M-1-0816-U (L26*3/4"M) - 26mmx3/4"M, M-1-0817-U (L26*1"M) - 26mmx1"M, M-1-0810-U (L32*1/2"M) - 32mmx1/2"M, M-1-0811-U (L32*3/4"M) - 32mmx3/4"M, M-1-0812-U (L32*1"M) - 32mmx1"M, M-1-0814-U (L32*1 1/4"M) - 32mmx1-1/4"M. Female elbow: M-1-0901-U (L16*1/2"F) - 16mmx1/2"F, M-1-0902-U (L16*3/4"F) - 16mmx3/4"F, M-1-0903-U (L18*1/2"F) - 18mmx1/2"F, M-1-0904-U (L18*3/4"F) - 18mmx3/4"F, M-1-0905-U (L20*1/2"F) - 20mmx1/2"F, M-1-0906-U (L20*3/4"F) - 20mmx3/4"F, M-1-0913-U (L20*1"F) - 20mmx1"F, M-1-0907-U (L25*1/2"F) - 25mmx1/2"F, M-1-0908-U (L25*3/4"F) - 25mmx3/4"F, M-1-0909-U (L25*1"F) - 25mmx1"F, M-1-0914-U (L26*1/2"F) - 26mmx1/2"F, M-1-0915-U (L26*3/4"F) - 26mmx3/4"F, M-1-0916-U (L26*1"F) - 26mmx1"F, M-1-0910-U (L32*1/2"F) - 32mmx1/2"F, M-1-0911-U (L32*3/4"F) - 32mmx3/4"F, M-1-0912-U (L32*1"F) - 32mmx1"F, M-1-0917-U (L32*1 1/4"F) - 32mmx1-1/4"F. Wall plated elbow: M-1-1001-U (L16*1/2"F(A)) - 16mmx1/2"F, M-1-1002-U (L16*3/4"F(A)) - 16mmx3/4"F, M-1-1003-U (L18*1/2"F(A)) - 18mmx1/2"F, M-1-1004-U (L20*1/2"F(A)) - 20mmx1/2"F, M-1-1006-U (L20*3/4"F(A)) - 20mmx3/4"F. Tee: M-1-1101-U (T1216) - 16mm, M-1-1102-U (T1418) - 18mm, M-1-1103-U (T1620) - 20mm, M-1-1104-U (T2025) - 25mm, M-1-1109-U (T2026) - 26mm, M-1-1105-U (T2632) - 32mm. Reduced tee: M-1-1202-U (T16*20*16) - 16x20x16mm, M-1-1203-U (T16*25*16) - 16x25x16 mm, M-1-1255-U (T16*26*16) - 16x26x16mm, M-1-1204-U (T18*16*18) - 18x16x18mm, M-1-1205-U (T18*20*18) - 18x20x18mm, M-1-1206-U (T18*25*18) - 18x25x18mm, M-1-1256-U (T18*26*18) - 18x26x18mm, M-1-1207-U (T20*16*20) - 20x16x20mm, M-1-1208-U (T20*18*20) - 20x18x20mm, M-1-1209-U (T20*25*20) - 20x25x20mm, M-1-1211-U (T25*16*25) - 25x16x25mm, M-1-1259-U (T25*16*16) - 25x16x16mm, M-1-1260-U (T26*16*16) - 26x16x16mm, M-1-1212-U (T25*18*25) - 25x18x25mm, M-1-1213-U (T25*20*25) - 25x20x25mm, M-1-1214-U (T25*32*25) - 25x32x25mm, M-1-1240-U (T20*26*20) - 20x26x20mm, M-1-1241-U (T26*16*26) - 26x16x26mm, M-1-1242-U (T26*18*26) - 26x18x26mm, M-1-1243-U (T26*20*26) - 26x20x26mm, M-1-1244-U (T26*32*26) - 26x32x26mm, M-1-1215-U (T32*16*32) - 32x16x32mm, M-1-1216-U (T32*18*32) - 32x18x32mm, M-1-1217-U (T32*20*32) - 32x20x32mm, M-1-1218-U (T32*25*32) - 32x25x32mm, M-1-1225-U (T25*16*20) - 25x16x20mm, M-1-1226-U (T32*20*25) - 32x20x25mm, M-1-1246-U (T26*16*20) - 26x16x20mm, M-1-1247-U (T32*20*25) - 32x20x26mm, M-1-1218-U (T20*16*16) - 20x16x16mm, M-1-1219-U (T20*20*16) - 20x20x16mm, M-1-1220-U (T25*25*18) - 25x25x18mm, M-1-1221-U (T25*25*20) - 25x25x20mm, M-1-1222-U (T25*18*18) - 25x18x18mm, M-1-1223-U (T25*20*20) - 25x20x20mm, M-1-1224-U (T25*16*20) - 25x16x20mm, M-1-1227-U (T32*20*25) - 32x20x25mm, M-1-1261-U (T26*26*16) - 26x26x16mm, M-1-1248-U (T26*26*18) - 26x26x18mm, M-1-1249-U (T26*26*20) - 26x26x20mm, M-1-1250-U (T26*18*18) - 26x18x18mm, M-1-1251-U (T26*20*20) - 26x20x20mm, M-1-1252-U (T26*20*16) - 26x20x16mm, M-1-1253-U (T32*20*26) - 32x20x26mm, M-1-1254-U (T32*32*16) - 32x32x16mm, M-1-1256-U (T32*32*20) - 32x32x20mm, M-1-1257-U (T32*32*26) - 32x32x26mm, M-1-1262-U (T32*25*25) - 32x25x25mm, M-1-1258-U (T32*26*26) - 32x26x26mm, M-1-1245-U (T32*26*32) - 32x26x32mm. Male tee: M-1-2801-U (T16*1/2"M*16) - 16mmx1/2"Mx16mm, M-1-2802-U (T16*3/4"M*16) - 16mmx3/4"Mx16mm, M-1-2803-U (T20*1/2"M*20) - 20mmx1/2"Mx20mm, M-1-2804-U (T20*3/4"M*20) - 20mmx3/4"Mx20mm. Female tee: M-1-1301-U (T16*1/2"F*16) - 16mmx1/2"Fx16mm, M-1-1302-U (T16*3/4"F*16) - 16mmx3/4"Fx16mm, M-1-1303-U (T18*1/2"F*18) - 18mmx1/2"Fx18mm, M-1-1304-U (T18*3/4"F*18) - 18mmx3/4"Fx18mm, M-1-1305-U (T20*1/2"F*20) - 20mmx1/2"Fx20mm, M-1-1306-U (T20*3/4"F*20) - 20mmx3/4"Fx20mm, M-1-1307-U (T20*1"F*20) - 20mmx1"Fx20mm, M-1-1308-U (T25*1/2"F*25) - 25mmx1/2"Fx25mm, M-1-1309-U (T25*3/4"F*25) - 25mmx3/4"Fx25mm, M-1-1310-U (T25*1"F*25) - 25mmx1"Fx25mm, M-1-1329-U (T26*1/2"F*26) - 26mmx1/2"Fx26mm, M-1-1330-U (T26*3/4"F*26) - 26mmx3/4"Fx26mm, M-1-1331-U (T26*1"F*26) - 26mmx1"Fx26mm, M-1-1311-U (T32*1/2"F*32) - 32mmx1/2"Fx32mm, M-1-1312-U (T32*3/4"F*32) - 32mmx3/4"Fx32mm, M-1-1313-U (T32*1"F*32) - 32mmx1"Fx32mm, M-1-1314-U (T32*11/4"F*32) - 32mmx1-1/4"Fx32mm. Cap: M-1-2601-U (D1216) - 16mm, M-1-2602-U (D1418) - 18mm, M-1-2603-U (D1620) - 20mm, M-1-2604-U (D2025) - 25mm, M-1-2606-U (D2026) - 26mm, M-1-2605-U (D2632) - 32mm. Female union: M-1-2901-U (H16*1/2F) - 16mmx1/2"F, M-1-2902-U (H16*3/4F) - 16mmx3/4"F, M-1-2903-U (H20*1/2F) - 20mmx1/2"F, M-1-2904-U (H20*3/4F) - 20mmx3/4"F, M-1-2907-U (H25*1/2F) - 25mmx1/2"F, M-1-2905-U (H25*3/4F) - 25mmx3/4"F, M-1-2908-U (H25*1F) - 25mmx1"F, M-1-2909-U (H26*1/2F) - 26mmx1/2"F, M-1-2910-U (H26*3/4F) - 26mmx3/4"F, M-1-2911-U (H26*1F) - 26mmx1"F, M-1-2906-U (H32*1F) - 32mmx1"F. Pipe: S-1-0509 (PEX-AL-PEX pipe) - 16x2.0mm, S-1-0510 (PEX-AL-PEX pipe) - 18x2.0mm, S-1-0511 (PEX-AL-PEX pipe) - 20x2.0mm, S-1-0512 (PEX-AL-PEX pipe) - 25x2.5mm, S-1-0517 (PEX-AL-PEX pipe) - 26x3.0mm, S-1-0513 (PEX-AL-PEX pipe) - 32x3.0mm.

Factor:

Zhejiang Mingshi Xingxin Havc Technology Co., Ltd

Company Name

Zhejiang Mingshi Xingxin Havc Technology Co., Ltd

Address

No 7-1 Gengye Road Diankou Town Zhuji City Zhejiang Province

Country

China

View All Listings by this Company

Range of ‘Henco Profit Synthetic’ pushfit fittings with PPS (HPK models) or brass (HP models) bodies and EPDM o-rings, to be used with ‘Henco RIXc’ PEXc/Al/PEXc multilayer pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310331

Expiry date:

31/10/2028

Size:

See models (threaded connections are BSP).

Marking:

Pipe: Henco RIXc, size, max pressure, max temp and technical info laser etched on pipe, D.O.M. DDMMYY. Fittings: Henco D.O.M (MM/YY) and size on body.

Installation Requirements:

R001

Model:

1HPK-1616 - Elbow 90° 16x16, 1HPK-1616-1 - Elbow 90° 16x16 - 1pc, 1HPK-2020 - Elbow 90° 20x20, 1HPK-2020-1 - Elbow 90° 20x20 - 1pc, 1HPK-2626 - Elbow 90° 26x26, 1HPK-2626-1 - Elbow 90° 26x26 - 1pc. 2HP-1604K - Backplate elbow female, short 16x1/2", 2HP-1604K-1 - Backplate elbow female, short 16x1/2" - 1pc, 2HP-2004K - Backplate elbow female, short 20x1/2", 2HP-2004K-1 - Backplate elbow female, short 20x1/2" - 1pc. 5HP-1604 - Bend 90° male adapter 16x1/2", 5HP-1604-1 - Bend 90° male adapter 16x1/2" - 1pc, 5HP-2004 - Bend 90° male adapter 20x1/2", 5HP-2004-1 - Bend 90° male adapter 20x1/2" - 1pc, 5HP-2005 - Bend 90° male adapter 20x3/4", 5HP-2005-1 - Bend 90° male adapter 20x3/4" - 1pc. 6HP-1604 - Bend 90° female adapter 16x1/2", 6HP-1604-1 - Bend 90° female adapter 16x1/2" - 1pc, 6HP-2004 - Bend 90° female adapter 20x1/2", 6HP-2004-1 - Bend 90° female adapter 20x1/2" - 1pc, 6HP-2005 - Bend 90° female adapter 20x3/4", 6HP-2005-1 - Bend 90° female adapter 20x3/4" - 1pc. 9HPK-161616 - T-piece 16x16x16, 9HPK-161616-1 - T-piece 16x16x16 - 1pc, 9HPK-202020 - T-piece 20x20x20, 9HPK-202020-1 - T-piece 20x20x20 - 1pc, 9HPK-262626 - T-piece 26x26x26, 9HPK-262626-1 - T-piece 26x26x26 - 1pc. 10HPK-201620 - T-reduced centre 20x16x20, 10HPK-201620-1 - T-reduced centre 20x16x20 - 1pc. 11HPK-201616 - T-branch and line reduced 20x16x16, 11HPK-201616-1 - T-branch and line reduced 20x16x16 - 1pc, 11HPK-202016 - T-branch and line reduced 20x20x16, 11HPK-202016-1 - T-branch and line reduced 20x20x16 - 1pc, 11HPK-262616 - T-branch and line reduced 26x26x16, 11HPK-262616-1 - T-branch and line reduced 26x26x16 - 1pc, 11HPK-262620 - T-branch and line reduced 26x26x20, 11HPK-262620-1 - T-branch and line reduced 26x26x20 - 1pc. 13HP-160416 - T-female centre branch 16x1/2"x16, 13HP-160416-1 - T-female centre branch 16x1/2"x16 - 1pc, 13HP-200420 - T-female centre branch 20x1/2"x20, 13HP-200420-1 - T-female centre branch 20x1/2"x20 - 1pc. 15HPK-1616 - Straight coupling 16x16, 15HPK-1616-1 - Straight coupling 16x16 - 1pc, 15HPK-2020 - Straight coupling 20x20, 15HPK-2020-1 - Straight coupling 20x20 - 1pc, 15HPK-2626 - Straight coupling 26x26, 15HPK-2626-1 - Straight coupling 26x26 - 1pc. 16HPK-2016 - Reducing coupling 20x16, 16HPK-2016-1 - Reducing coupling 20x16 - 1pc. 17HP-1604 - Straight male adapter 16x1/2", 17HP-1604-1 - Straight male adapter 16x1/2" - 1pc, 17HP-2004 - Straight male adapter 20x1/2", 17HP-2004-1 - Straight male adapter 20x1/2" - 1pc, 17HP-2005 - Straight male adapter 20x3/4", 17HP-2005-1 - Straight male adapter 20x3/4" - 1pc, 17HP-2605 - Straight male adapter 26x3/4", 17HP-2605-1 - Straight male adapter 26x3/4" - 1pc. 18HP-1604 - Straight female adapter 16x1/2", 18HP-1604-1 - Straight female adapter 16x1/2" - 1pc, 18HP-2004 - Straight female adapter 20x1/2", 18HP-2004-1 - Straight female adapter 20x1/2" - 1pc, 18HP-2005 - Straight female adapter 20x3/4", 18HP-2005-1 - Straight female adapter 20x3/4" - 1pc. 19HPK-1605 - Eurocone Adapter 16 x EK 3/4"F, 19HPK-1605-1 - Eurocone Adapter 16 x EK 3/4"F - 1pc, 19HPK-2005 - Eurocone Adapter 20 x EK 3/4"F, 19HPK-2005-1 - Eurocone Adapter 20 x EK 3/4"F - 1pc. 26HP-1604 - Straight tap connector 16x1/2", 26HP-1604-1 - Straight tap connector 16x1/2" - 1pc, 26HP-1605 - Straight tap connector 16x3/4", 26HP-1605-1 - Straight tap connector 16x3/4" - 1pc, 26HP-2005 - Straight tap connector 20x3/4", 26HP-2005-1 - Straight tap connector 20x3/4" - 1pc. 34HP-1604 - Elbow 90° tap connector 16x1/2", 34HP-1604-1 - Elbow 90° tap connector 16x1/2" - 1pc. 54HP-1615 - Straight transition coupler 16x15, 54HP-1615 - Straight transition coupler 16x15 -1 pc, 54HP-2015 - Straight transition coupler 20x15, 54HP-2015 - Straight transition coupler 20x15 – 1 pc, 54HP-2022 - Straight transition coupler 20x22, 54HP-2022 - Straight transition coupler 20x22 – 1 pc, 54HP-2622 - Straight transition coupler 26x22, 54HP-2622 - Straight transition coupler 26x22 – 1 pc, 54HP-2628 - Straight transition coupler 26x28. 60HPK-2016 - Reducing elbow 90° 20x16, 60HPK-2016-1 - Reducing elbow 90° 20x16 - 1pc. HPK-ENDCAP16 - End cap 16, HPK-ENDCAP16-1 - End cap 16 - 1pc, HPK-ENDCAP20 - End cap 20, HPK-ENDCAP20-1 - End cap 20 - 1pc, HPK-ENDCAP26 - End cap 26, HPK-ENDCAP26-1 - End cap 26 - 1pc. VVHPK-20 - Manifold supply 20, VVHPK-20-1 - Manifold supply 20 - 1pc, VVHPK-26 - Manifold supply 26, VVHPK-26-1 - Manifold supply 26 - 1pc. Henco RIXc xxx-160212 Henco RIXc Multilayer pipe PEXc/Al/PEXc xxx-200216 Henco RIXc Multilayer pipe PEXc/Al/PEXc xxx-260320 Henco RIXc Multilayer pipe PEXc/Al/PEXc

Manufacturer:

Henco Industries NV

Company Name

Henco Industries NV

Address

Toekomstlaan 27 B-2200 Herentals

Country

Belgium

Phone

+3214218712

View All Listings by this Company

Fluxo range of Brass & PPSU crimp fittings for use with ‘Fluxo’ PEX/Al/PEX Multilayer Pipe. Crimp joint is achieved by a TH profile crimp jaws. Maximum working pressure 10bar @ 70°C, 6Bar @ 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2311334

Expiry date:

30/11/2028

Size:

See Model

Marking:

PPSU fittings: Fluxo, PPSU, size stamped on body. Brass fittings: Fluxo, size, DZR stamped on body. Pipe: Fluxo, date of manufacture (yyyy/mm/dd), size, ISO 21003 & other technical information.

Installation Requirements:

R001

Model:

PPSU Crimp Equal Elbows: FLC16ZPN A 90' D.16 FLC20ZPN A 90' D.20 FLC26ZPN A 90' D.26 FLC32ZPN A 90' D.32 PPSU Crimp Equal Tees: FLT16ZPN D.16 FLT20ZPN D.20 FLT26ZPN D.26 FLT32ZPN D.32 PPSU Crimp Reducing Tees: FLT201616ZPN D.20/16/16 FLT201620ZPN D.20/16/20 FLT202016ZPN D.20/20/16 FLT261626ZPN D.26/16/26 FLT262020ZPN D.26/20/20 FLT262026ZPN D.26/20/26 FLT322032ZPN D.32/20/32 FLT322632ZPN D.32/26/32 PPSU Reducing Sleeve Reducers: FLM2016ZPN D.20/16 FLM3226ZPN D.32/26 PPSU Equal Crimp Sleeves: FLM16ZPN D.16 FLM20ZPN D.20 FLM26ZPN D.26 FLM32ZPN D.32 Brass Male Transition Elbows: FXC1612M 16mm x 3/8" FXC1615M 16mm x 1/2" FXC2015M 20mm x 1/2" FXC2020M 20mm x 3/4" FXC2620M 26mm x 3/4" FXC2626M 26mm x 1" FXC3226M 32mm x 1" Brass Female Transition Elbows: FXC1615F 16mm x 1/2" FXC2015F 20mm x 1/2" FXC2020F 20mm x 3/4" FXC2620F 26mm x 3/4" FXC2626F 26mm x 1" FXC3226F 32mm x 1" Brass Wall Mounted Transition Elbows: FXCA1615F 16mm x 1/2" FXCA2015F 20mm x 1/2" Brass Transition Elbows with Rotating Nut: FXCT1615F 16mm x 1/2" FXCT1620F 20mm x 3/4" FXCT2015F 20mm x 1/2" FXCT2020F 20mm x 3/4" FXCT2620F 26mm x 3/4" Brass Male Straight Transition Adaptors: FXM1612M 16mm x 3/8" FXM1615M 16mm x 1/2" FXM1620M 16mm x 3/4" FXM2015M 20mm x 1/2" FXM2020M 20mm x 3/4" FXM2615M 26mm x 1/2" FXM2620M 26mm x 3/4" FXM2626M 26mm x 1" FXM3226M 32mm x 1" Brass Female Straight Transition Adaptors: FXM1615F 16mm x 1/2" FXM1620F 16mm x 3/4" FXM2015F 20mm x 1/2" FXM2020F 20mm x 3/4" FXM2026F 20mm x 1" FXM2620F 26mm x 3/4" FXM2626F 26mm x 1" FXM3226F 32mm x 1 FXM3233F 32mm x 1 1/4" Brass Reducer: FXM2616 26mm x 16mm FXM2620 26mm x 20mm FXM3216 32mm x 16mm FXM3220 32mm x 20mm Nickel Plated Male Compression Adaptor for Heater: FLMPN1612M 16x3\8” FLMPN1615M 16x1\2” FLMPN2015M 20x1\2” FLMPN2020M 20x3\4” Brass Female Transition Adaptor with Rotating Nut: FXMT1612F 16mm x 3/8" FXMT1615F 16mm x 1/2" FXMT1620F 16mm x 3/4" FXMT2015F 20mm x 1/2" FXMT2020F 20mm x 3/4" FXMT2620F 26mm x 3/4" FXMT2626F 26mm x 1" FXMT3226F 32mm x 1" FXMT3233F 32mm x 1 1/4" Brass Double Female Transition Elbow Wall Plate: FXSM1615F 16mm x 1/2" FXSM2015F 20mm x 1/2" Brass Female Tee: FXT1615F 16mm x 1/2" FXT2015F 20mm x 1/2" FXT2020F 20mm x 3/4" FXT2615F 26mm x 1/2" FXT2620F 26mm x 3/4" FXT3215F 32mm x 1/2" FXT3220F 32mm x 3/4" Brass Male Transitin Tee: FXT1615M 16mm x 1/2" FXT2620M 26mm x 3/4" Brass Reducing Tee: FXT162016 16mm x 20mm x 16mm FXT202016 20mm x 20mm x 16mm FXT202620 20mm x 26mm x 20mm FXT261620 26mm x 16mm x 20mm FXT262616 26mm x 26mm x 16mm FXT262620 26mm x 26mm x 20mm FXT321632 32mm x 16mm x 32mm Bare Coils: FLEM100C16 Fluxo Pipe 16mm 100m FLEM100C20 Fluxo Pipe 20mm 100m FLEM200C16 Fluxo Pipe 16mm 200m FLEM50C26 Fluxo Pipe 26mm 50m FLEM50C32 Fluxo Pipe 32mm 50m Blue Sheathed Coils: FLEM100FB16 Fluxo Pipe 16mm 100m FLEM50FB16 Fluxo Pipe 16mm 50m FLEM50FB20 Fluxo Pipe 20mm 50m Red Sheathed Coils: FLEM100FR16 Fluxo Pipe 16mm 100m FLEM50FR16 Fluxo Pipe 16mm 50m FLEM50FR20 Fluxo Pipe 20mm 50m FLEM50FR26 Fluxo Pipe 26mm 50m Pre Insulated Coils: FLEM50G10P16 Fluxo Pipe 16mm 50m FLEM50G10P20 Fluxo Pipe 20mm 50m FLEM50G10P26 Fluxo Pipe 26mm 50m FLEM25G10P32 Fluxo Pipe 32mm 25m Bare Pipe Lengths FLEM4L16 Fluxo Pipe 16mm 4m FLEM4L20 Fluxo Pipe 20mm 4m FLEM4L26 Fluxo Pipe 26mm 4m FLEM4L32 Fluxo Pipe 32mm 4m FLEM3L16 Fluxo Pipe 16mm 3m FLEM3L20 Fluxo Pipe 20mm 3m

Factor:

Aliaxis UK

Company Name

Aliaxis UK

Address

Unit 1 Swaffield Park, Hyssop Close, Cannock, Staffs.

Postcode

WS11 7FU

View All Listings by this Company

Manufacturer:

Nicoll (pipe), REDI S.p.A. (plastic fittings) & Bonomi Idrosanitaria (brass fittings).

Company Name

Nicoll (pipe), REDI S.p.A. (plastic fittings) & Bonomi Idrosanitaria (brass fittings).

Address

Nicoll, 37, rue Pierr Marie Curie 49309 Cholet Cedex REDI S.p.A, Località Ischia di Crociano snc, 57025 Piombino, Livorno Bonomi Idrosanitaria, Vallegobbia 68 25068 Sarezzo - Brescia

View All Listings by this Company