Expansion Vessels

Section Code 1000 :

Back To Directory Sections

#2207066

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:
1000 Expansion Vessels
Description:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Please refer to model.
Marking:
CENTER/ JET, WRAS, model, capacity, maximum operating pressure and other technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
597808 CENTER DOMESTIC POTABLE EXPANSION VESSEL (80 Litres) Vertical: S04912 *JET 50, S04913 *JET 60, S04914 *JET 80, S04915 *JET 100 & S04916 *JET 150 POTABLE EXPANSION VESSELS (50, 60, 80, 100, 150 Litres) Vertical 10.0 Bar, 100°C, 1” BSP (M). S04917 *JET 200, S04918 *JET 300 & S04919 *JET 500 POTABLE EXPANSION VESSELS (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). 597801 CENTER SHOCK ARRESTOR(162ml): 20.0 Bar, 100°C, ½” BSP (M). . 597802 CENTER DOMESTIC POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). 597803 CENTER DOMESTIC POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597804 & 597805 CENTER DOMESTIC POTABLE EXPANSION VESSELS (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597806 & 597807 CENTER POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).

Approval Holder:
Wolseley UK
Company Name
Wolseley UK
Address
2 Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2210343

Range of expansion vessels with galvanised or stainless-steel inlets, incorporating butyl rubber diaphragms. The inlet incorporates a plastic strainer (all models, except for WD model). For maximum working pressures please refer to model.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1000 Expansion Vessels
Description:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
Existing models and models added February 2023: ¾” BSP (M). Models added April 2023: 22mm compression.
Marking:
Existing models and models added February 2023: Reflex, address, pressure rating, volume, serial number and other technical information on an adhesive label on the body. Models added April 2023: Reflex, model, pressure rating, volume, year of manufacture (MM.YYYY) and other technical information on an adhesive label on the body.
Installation Requirements:
R001
Expiry date:
31/10/2027
Model:
The number in the model indicates capacity in litres: Refix DD 2: maximum working pressure 10 bar. Refix DD 4: 10 bar. Refix DD 7: 10 bar. Refix DD 8: 10 bar. Refix DD 12: 10 bar. Refix DD 18: 10 bar. Refix DD 8: 16 bar. Refix DD 12: 16 bar. Refix DD 8: 25 bar. Refix DT 2: 10 bar. Refix DE 2: 10 bar. Refix DE 4: 10 bar. Refix DE 8: 10 bar. Refix DE 12: 10 bar. Refix DE 18: 10 bar. Refix DE 8: 16 bar. Refix DE 12: 16 bar. Refix DE 8: 25 bar. Refix WD 0.165:10 bar. Models added February 2023: Refix DD Galv 2: 10 bar. Refix DD Galv 4: 10 bar. Refix DD Galv 7: 10 bar. Refix DD Galv 8: 10 bar. Refix DD Galv 12: 10 bar. Refix DE 18: 10 bar. Refix DE ‘E’ 2: 10 bar. Refix DE ‘E’ 4: 10 bar. Refix DE ‘E’ 8: 10 bar. Refix DE ‘E’ 12: 10 bar. Refix D DE ‘E’ 18: 10 bar. Models added April 2023: Refix DE 12 (M22C): 10 bar. Refix DE 18 (M22C): 10 bar.

Approval Holder:
Reflex Winkelmann GmbH
Company Name
Reflex Winkelmann GmbH
Address
Gersteinstrasse 19, D-59227 Ahlen
Country
germany

View All Listings by this Company

Print This Approval


#2304338

Range of expansion vessels with a butyl membrane. Maximum working pressure 10 bar. Maximum operating temperature 99°C

Section:
1000 Expansion Vessels
Size:
¾” male BSP
Marking:
Zilmet, model code, volume, serial no, date of manufacture (YY) and pressure rating on adhesive label.
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
11E0000800 - EASY-PRO 8 EXPANSION VESSEL – 8 litres 11E0001200 - EASY-PRO 12 EXPANSION VESSEL – 12 litres 11E0001800 - EASY-PRO 18 EXPANSION VESSEL – 18 litres 11E0002400 - EASY-PRO 24 EXPANSION VESSEL – 24 litres
Product Images

Approval Holder:
Zilmet UK Limited
Company Name
Zilmet UK Limited
Address
Airfield Industrial Estate, Hixon, Stafford
Postcode
ST18 0PF
Phone
01889 272 185
General Email
sales@zilmet.co.uk

View All Listings by this Company
Manufacturer:
Zilmet Spa
Company Name
Zilmet Spa
Address
35010 Limena (Padova) Via Del Santo 242 Italy
Phone
+ 49 8840662 Fax: + 49 767321 Telex: 430181
General Email

View All Listings by this Company

Print This Approval


#2206060

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:
1000 Expansion Vessels
Size:
1” BSP (M), 1½” BSP (M) & 2” BSP (M).
Marking:
Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
XVES050070 35L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050072 35L VERT POT VESSEL WHITE 2.2B XVES050075 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050079 35L VERTICAL POT VESSEL 10BAR MAX 16. XVES050080 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0 XVES050090 60L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050099 60L VERTICAL POT VESSEL 10BAR MAX 16 XVES050100 80L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050109 80L VERTICAL POT VESSEL 10BAR MAX 16 XVES050110 100L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050119 100L VERTICAL POT VESSEL 10BAR MAX 16 XVES050120 150L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050129 150L VERTICAL POT VESSEL 10BAR MAX 16 XVES050130 200L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050131 200L VERT POT VESSEL BLUE 2.1B XVES050139 200L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050140 300L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050141 300L VERT POT VESSEL BLUE 2.1B XVES050149 300L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050150 500L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050160 750L VERTICAL POT VESSEL RED PRE-SET 4.0 XVES050170 1000L VERTICAL POT VESSEL RED PRE-SET 4

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2109069

Range of expansion vessels with stainless steel bodies incorporating a butyl rubber membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1000 Expansion Vessels
Description:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
½” BSP (M).
Marking:
TFC Group, model number, max temperature, total volume and max pressure on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
Stainless steel bodies: SA1/2

Approval Holder:
TFC Group
Company Name
TFC Group
Address
Tower House, Vale Rise, Tonbridge
Postcode
TN9 1TB
Country
Kent

View All Listings by this Company

Print This Approval


#2310098

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
Description:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
Cimm logo, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 100°C: AFE 750, AFE 1000 & AFE 1500. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AFE CE 750, AFE CE 1000 & AFE CE 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AFE CE 750 D.750.
Product Images

Approval Holder:
CIMM SpA
Company Name
CIMM SpA
Address
Via Caprera, 13 Castello di Godego (TV)
Postcode
31030
Country
Italy
Phone
0039 0423 760009
General Email
info@cimmspa.com

View All Listings by this Company
Manufacturer:
CIMM SpA
Company Name
CIMM SpA
Address
Via Caprera, 13 Castello di Godego (TV)
Postcode
31030
Country
Italy
Phone
0039 0423 760009
General Email
info@cimmspa.com

View All Listings by this Company

Print This Approval


#2310378

Range of shock arrestors with stainless steel bodies and EPDM diaphragm. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:
1000 Expansion Vessels
Size:
½” BSP(M).
Marking:
Flamco, Flexofit on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
Flexofit. Flexofit without cap
Product Images

Approval Holder:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company
Manufacturer:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval


#2310115

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
Description:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
Flamco, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AIRFIX P 750, AIRFIX P 1000 & AIRFIX P 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AIRFIX P 750 (diam 750)

Approval Holder:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval


#2310116

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
Description:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
BOSS, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: BOSS 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: BOSS.750.

Approval Holder:
BSS Industrial
Company Name
BSS Industrial
Address
Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2311071

Expansion vessel with stainless steel body and butyl membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C

Section:
1000 Expansion Vessels
Size:
15mm compression
Marking:
Trappex logo and Centrashock on adhesive label on body.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
Trappex Centrashock Trapshock12/DIA
Product Images

Approval Holder:
Trappex Ltd.
Company Name
Trappex Ltd.
Address
59 Springwood Hall Gardens, Huddersfield
Postcode
HD1 4HA
Country
United Kingdom
General Email
info@trappex.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 3 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.