Section Code 0684 : Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
Back To Directory SectionsRange of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via infra-red sensor. The products are supplied with a stainless steel braided PEX lined flexible hose assembly to connect between the tap body and the solenoid valve. The spout outlets incorporate plastic aerators and the solenoid inlet incorporates a stainless steel strainer. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The AT02-004, AT02-014 & AT02-024 spouts are intended to accommodate a filter on the outlet. No filter is supplied with the product and is not considered part of the approval. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection, 10mm copper tail or 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
‘Classic’ range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated DZR brass). Flow is controlled via solenoid valve, actuated by an infra-red sensor. The spout outlet incorporates a plastic aerator. AT01-001 & AT01-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT01-002 & AT01-012 models have a 10mm copper tail. AT01-003 & AT01-013 models have a 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.
Sensor control unit, flow is controlled using a solenoid valve assembly and is activated via infra-red non touch operation. The Art 30622 model has an in-line spherical valve on each inlet, as well as an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection The Art 30629 & 33725 model is supplied with two angled isolation valves and two stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections, which are intended to connect to the tee piece installed prior to the solenoid valve. The tee piece inlets incorporate a combined washer and stainless steel strainer and an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Page 2 of 35
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.