Combination Tap Assemblies

Section Code 0681 : Miscellaneous.

Back To Directory Sections

#2012704

Range of five hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork controlling the flow to the shower handset and two quarter turn ceramic disc headworks controlling the flow to the spout outlet, all with single lever operating members. The spout outlets incorporate a plastic aerator. The inlet to the shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2012704
Expiry date:
31/12/2025
Note:
Connection hose prior to main shower hose to be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717
Size:
Stainless steel braided PE-X lined flexible hose with EPDM rubber washer and 1/2" captive nut end connection
Marking:
Vola on side of operating member.
Installation Requirements:
R001 R009 R010 R040
Model:
VOLA BK11 & VOLA BK13 (Mixer Complete with Adjustable bracket and water collection box), VOLA BK11A & VOLA BK13A (Mixer with Bracket), VOLA BK11B & VOLA BK13B (Mixer alone). Available with stainless steel trim kits with the following finishes (indicated with a suffix to the product name): 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold. Or brass trim kits with the following finishes (indicated with a suffix to the product name): 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

Print This Approval


#2010051

Range of combined bath fillers and overflows with a plastic body and a variety of different trims. The outlet incorporates a plastic flow regulator and the products are supplied with a cable operated pop-up waste. Maximum operating temperature 65°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2010051
Expiry date:
31/10/2025
Note:
Open outlet use only.
Size:
¾” BSP (M)
Marking:
Viega on waste operating member
Installation Requirements:
R001 R576
Model:
Multiplex Trio MT 1: 6161.2. 6161.33. 6161.34. 6191.11. 97669GH. 98170KA. 98917KA. 99327KA. 99371KA. 99761KA. 97695GH. 977362KA. 97364KA. 6191.12. 97639DO.
Factor:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 57439 Attendorn
Country
Germany
Phone
+49 2722 61-0

View All Listings by this Company

Print This Approval


#2009026

Combined bath filler and overflow with a brass body and metal trim (various finishes). The outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a click type waste. Maximum operating temperature 85°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2009026
Expiry date:
30/09/2025
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Coalbrook (brand of Davroc) logo on the underside of the bath filler/overflow trim piece.
Installation Requirements:
R001 R576
Model:
XX5000YY XX represents the branding, which can be replaced with: CO = Coalbrook. YY denotes the finish, which can be replaced with: BN = Brushed Nickel. CP = Chrome. GN = Gunmetal. SB = Stable Brass.
Factor:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2009036

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator and the product is supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2009036
Expiry date:
30/09/2025
Note:
No testing performed on pop-up waste. Open outlet use only.
Size:
Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:
C.G.S. S.r.l logo on waste operating member
Installation Requirements:
R001 R576
Model:
132YY.XX Model added June 2021: 122YY.XX YY denotes pipe length in cm, available as: 55, 70, 80, 90, 105, 115, 125. XX denotes finish, where: 01 = Standard chrome. 05 = PVD chrome. 06 = Black chrome. 12 = Gold. 15 = Rose Gold. 17 = PVD Gold. 25 = Brushed Bronze. 26 = Brushed copper. 33 = White Matt. 35 = White. 43 = Black Matt. 45 = Black. 40 = Brushed Nickel.
Manufacturer:
C.G.S. S.r.l.
Company Name
C.G.S. S.r.l.
Country
Italy
Phone
+39 0322 83.99.71

View All Listings by this Company

Print This Approval


#2010053

Range of floor mounted, single hole, single outlet fixed combination tap assemblies (chromium plated brass with a self-cancelling diverter to shower outlet. The product incorporates a ceramic cartridge headwork and single lever operating member. The spout outlets incorporate an aerator and the product is supplied with a hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2010053
Expiry date:
31/10/2025
Size:
Stainless-steel braided EPDM lined hose assembly with 3/4" captive nut end connections.
Marking:
GAOAO on rear of body & handset.
Installation Requirements:
R001 R030
Model:
SA3580 & SA3590
Manufacturer:
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 18

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.