Combination Tap Assemblies

Section Code 0681 : Miscellaneous.

Back To Directory Sections

#2311072

Range of four-hole, single outlet combination tap assemblies (brass or stainless steel bodies, various finishes - see model). The product incorporates a ceramic cartridge headwork controlling the temperature and flow to the shower handset, and a quarter turn ceramic disc headwork controlling the flow via a separate thermostatic cartridge to an outlet (spout not supplied), all with single lever operating members. The product is supplied with a shower hose and handset. The shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2311072
Expiry date:
30/11/2028
Note:
R007 applies to all connecting hoses, it does not apply to the shower hose.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
VOLA on shower handset
Installation Requirements:
R001 R007 R009 R010 R040
Proviso:
BK14 models: The water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
VOLA BK14-XX, VOLA BK14A-XX, VOLA BK14B-XX. Where XX denotes the surface finish, and can be replaced with any of the following: Brass models: 02 = Grey, 04 = Light Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Polished Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, 62 = Deep Black, 63 = Copper, 65 = Gold, 68 = Nickel. Stainless Steel models: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

Print This Approval


#2312075

Range of three hole, single outlet, combination tap assemblies (brass bodies – various finishes trim sets). Incorporating a ceramic cartridge headwork controlling the flow to the shower handset and a second ceramic cartridge headwork controlling flow to an external outlet (not supplied), both with single lever operating members. The product is supplied with a shower hose and handset, the handset incorporates a single check valve on the inlet, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2312075
Expiry date:
31/12/2028
Size:
Stainless steel braided, PEX lined flexible hose assemblies with a 1/2" BSP (F) captive nut end connection.
Marking:
VOLA logo on handle
Installation Requirements:
R001 R009 R010 R040 R511
Model:
VOLA BK3 – Mixer with Adjustable Bracket and water collection box VOLA BK3A – Mixer with Bracket VOLA BK3B – Mixer Alone Available with brass trim kits with the following finishes (indicated with a suffix to the product name): 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. Or stainless steel trim kits with the following finishes (indicated with a suffix to the product name): 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

Print This Approval


#2210070

Range of deck mounted, three-hole, combination tap assemblies, (various finishes - see model), comprising of two ceramic cartridge headworks each with a single lever operating member. The product is supplied with stainless steel braided thermoplastic silicone (TPSiV) lined flexible connection hoses and a nylon braided silicone lined flexible hose assembly, which connects to a shower hose (brass double interlocked, PEX lined) and a deck mounted shower handset. Spout not supplied. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2210070
Expiry date:
31/10/2027
Note:
R007 does not apply to the shower hose. This approval does not include a spout.
Size:
½” BSP (M) (to tee piece).
Marking:
C.P.Hart on operating member and shower handset.
Installation Requirements:
R001 R007 R009 R010 R040
Model:
CPHSP30441XX lever w/ ABS handshower, CPHSP30441XXX lever w/ ABS handshower, CPHSP30441VXX lever w/ ABS handshower, CPHSP30441GXX lever w/ ABS handshower. CPHSP30441BXX lever w/ BRASS handshower, CPHSP30441BXXX lever w/ BRASS handshower, CPHSP30441BVXX lever w/ BRASS handshower, CPHSP30441BGXX lever w/ BRASS handshower. CPHMA31441XX ABS handshower, CPHMA31441BXX BRASS handshower. CPHSP30741SS lever w/ INOX handshower. The last “XX” indicates the finish suffix Each code may begin with “Z” or “s” CR: chrome, SN: brushed nickel, CN: black chrome, CS: brushed black chrome, BS: white matt, NS: black matt OR: gold, OS: brushed gold, BR: bronze RA: old copper F3074/INOX.WR does not have XX within the model code - INOX = Stainless steel.
Factor:
C.P.Hart
Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA

View All Listings by this Company

Print This Approval


#240202033

Range of four-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240202033
Expiry date:
28/02/2029
Note:
The products are to be used with rough kit 13 444 180 Hansgrohe basic set for 4-hole rim mounted bath mixer or 15 480 180 AXOR basic set for 4-hole rim mounted bath mixer which are not part of this approval
Size:
Specifically for use with rough kit 13 444 180 or 15 480 180 which both have ½” BSP (M) inlets
Marking:
Axor or Hansgrohe on spout
Installation Requirements:
R001 R006 R020
Model:
39 446 xx0 (lever) 39 445 xx0 (cross top) 31 442 xx0 (lever) 16 546 xx0 (cross top) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#240202053

Range of five-hole, single outlet (fixed) combination tap assemblies with brass or stainless steel bodies in various finishes. The products incorporate a ceramic cartridge headwork controlling both the temperature and flow to the shower handset, and a quarter turn ceramic disc headwork controlling the flow via a thermostatic cartridge to the spout outlet. All have single lever operating members. Some models are supplied with a spout outlet which incorporates a plastic aerator. Some models are supplied with a shower hose and handset. The inlet to the spout assembly and the inlet of the shower handset each incorporate a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240202053
Expiry date:
28/02/2029
Note:
R006 applies to the spout, where its supplied. R040 applies to the shower handset, where its supplied. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
Stainless steel braided PEX lined hose with ½” BSP captive nut connection
Marking:
VOLA logo on the operating member
Installation Requirements:
R001 R006 R009 R010 R040
Model:
VOLA BK15, BK16: Mixer with Adjustable Bracket and water collection box. VOLA BK15A, BK16A: Mixer with Bracket. VOLA BK15B, BK16B: Mixer Alone. VOLA BK15, BK15A, BK15B: Thermostatic mixer with double swivel spout VOLA 090D‐XX and mixer with hand shower. VOLA BK16, BK16A, BK16B –Thermostatic mixer with swivel spout VOLA 090E‐XX and mixer with hand shower. Suffix in the end of the product name indicate the surface finish and denotes: For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

Print This Approval


#240204054

Range of five-hole, single outlet (fixed) combination tap assemblies with a brass body, incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The products have a self-cancelling operated diverter to shower outlet and are supplied with a shower hose, shower handset and interconnecting braided hoses. The spout outlet incorporates a plastic flow aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240204054
Expiry date:
28/02/2029
Size:
¾” BSP (M).
Marking:
Gessi Etched on Diverter Head.
Installation Requirements:
R001 R006 R009 R010
Model:
58040 (single lever), 58140 (cross top).
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#240404035

Range of brass elbows for combination tap assemblies with EPDM gaskets and pillars to suit bath mixers. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240404035
Expiry date:
30/04/2029
Size:
¾” BSP (M) ½” BSP (F)
Marking:
DTC 53 etched on body
Installation Requirements:
R001
Model:
RLE35 2.5" Pillars To Suit Bath Shower Mixer SPE19 Brass Elbow SPE19BK Brass Elbow – Matte Black SPE19BB Brass Elbow – Brushed Brass SPE19BN Brass Elbow – Brushed Nickel SPE19GM Brass Elbow – Gunmetal
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.