Combination Tap Assemblies
Section Code 0550 : Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #2207057
Two hole, single outlet (swivel) combination tap assembly (brass body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout is supplied with a stainless steel braided PEX lined flexible hose assembly and a brass connecting nipple for installation onto a quick connect polyamide braided PE lined flexible hose assembly from the headwork.
The quick connect hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0550 Combination Tap Assemblies
- Section Subtitle:
- Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2207057
- Expiry date:
- 31/07/2027
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
- Marking:
- Axor (brand of Hansgrohe SE) on base of spout.
- Installation Requirements:
- R001 R006 R007 R009 R010
- Model:
-
34 820 XXX Axor Citterio M 2-hole single lever kitchen mixer.
Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
- Factor:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company - Manufacturer:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company
WRAS Approval Number: #2206368
Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 1607023) or non-rising spindle headworks with dome type operating member (model 167021).
The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts.
Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
- Section:
- 0550 Combination Tap Assemblies
- Section Subtitle:
- Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2206368
- Expiry date:
- 30/06/2027
- Size:
- 1/2” BSP (M)
- Marking:
- ebb & flo on body
- Installation Requirements:
- R001 R006 R010
- Model:
-
37138 Deck Mono Mixer Kitchen Tap & 71595 Lever Deck Mixer Kitchen Tap
- Factor:
- TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK
BRISTOL ROAD
BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET
View All Listings by this Company
WRAS Approval Number: #2206372
Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 278585) or non-rising spindle headworks with dome type operating member (model 278583).
The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts.
Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
- Section:
- 0550 Combination Tap Assemblies
- Section Subtitle:
- Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2206372
- Expiry date:
- 30/06/2027
- Size:
- 1/2” BSP (M)
- Marking:
- CPS on tap body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
278583 Base Deck Sink Mixer & 278585 Lever Deck Sink Mixer combination tap assemblies
- Factor:
- CITY PLUMBING SUPPLIES HOLDINGS LTD
Company Name
CITY PLUMBING SUPPLIES HOLDINGS LTD
Address
HIGHBOURNE GROUP LTD
HIGHBOURNE HOUSE
ELDON WAY
NORTHHAMPTONSHIRE
Postcode
NN6 7SL
View All Listings by this Company
WRAS Approval Number: #2209304
Two hole, single outlet (swivel) combination tap assembly (chrome plated brass body), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates either a flow straightener or aertaor.
The product is supplied with metal backnuts.
Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
- Section:
- 0550 Combination Tap Assemblies
- Section Subtitle:
- Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2209304
- Expiry date:
- 30/09/2027
- Size:
- 1/2” BSP (M).
- Marking:
- Francis Pegler on rear of body
- Installation Requirements:
- R001 R006 R010
- Model:
-
4S1210 Araya
- Factor:
- StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6
William Way
Moss Industrial Estate
St Helens Road
Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230
View All Listings by this Company
WRAS Approval Number: #2210349
Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members.
The spout outlet incorporates a plastic aerator.
The products are supplied with metal backnuts.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0550 Combination Tap Assemblies
- Section Subtitle:
- Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2210349
- Expiry date:
- 31/10/2027
- Size:
- ½” BSP (M)
- Marking:
- GBM305 model:
Deva and DTC32A (brand of Methven on body),
LTK305 and NLD305 models:
DTC53 (brand of Methven on body).
- Installation Requirements:
- R001 R006 R010
- Model:
-
GBM305 - Georgian Bridge Sink Mixer,
LTK305 - Lostock Sink Mixer,
NLD305 - Newland Sink Mixer.
Model added September 2023:
GEN305
- Factor:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
Back To Directory Sections Page 11 of 15