Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201018

Expiry date:

31/01/2027

Size:

½” BSP (M)

Marking:

Lota on front of body

Installation Requirements:

R001 R006 R010

Model:

63479-00X Where X denotes finish and can be replaced with the following: 01 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 6801 = Matt Black, 09 = Brushed Copper, 0402 = Brushed Nickel PVD, 2409 = Brushed Bronze.

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No.61 Xingnan Road, Jimei District, Xiamen, 361022

Country

China

Phone

86-592-6665866

View All Listings by this Company

Two-hole, single outlet swivel combination tap assembly in various finishes (see model) incorporating quarter turn ceramic disc headworks with a cross top operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2203017

Expiry date:

31/03/2027

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided TPSIV lined flexible hose assembly incorporating 3/8" BSP captive nut end connection

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Model:

16 510 xxx AXOR Montreux 2 Where XXX denotes the surface finish (which is a non-water part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1, 77761 Schiltach Germany Hansgrohe Wasselonne S.A.S Parc d’Activites les Pins 67310 Wasselonne

Country

France

View All Listings by this Company

Wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204328

Expiry date:

30/04/2027

Size:

¾” x ½” offset unions

Marking:

Herz logo on operating member. Herz logo & manufacturers “letter” date code on body

Installation Requirements:

R001 R010 R040

Model:

Infinity I41

Manufacturer:

Herz d.o.o.

Company Name

Herz d.o.o.

Address

Grmaska Cesta 3 1275 Smartno pri Litiji

Country

Slovenia

Phone

+38 6 41 390 045

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (various finishes, see models). Incorporating ceramic cartridge headworks and single operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204070

Expiry date:

30/04/2027

Size:

Stainless steel braided, PEX lined flexible hose assembly with ½” BSP (F) captive nut end connections

Marking:

VOLA on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

VOLA BK5, VOLA BK5A & VOLA BK5B VOLA BK7, VOLA BK7A & VOLA BK7B Stainless Steel trim models. The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. Brass trim models. The surface finish is indicated by a suffix to the product name and denotes: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 59 = Brushed Natural Brass, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Difference in Models: VOLA BK5 & VOLA BK7: Mixer Complete with Adjustable bracket and water collection box VOLA BK5A & VOLA BK7A: Mixer with Bracket VOLA BK5B & BK7B: Mixer Alone

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2, 8700 Horsens

Country

Denmark

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assemblies (brass body, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever, cross top or wheel operating members. The spout outlet incorporates a plastic aerator and the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204060

Expiry date:

30/04/2027

Size:

¾” BSP (M)

Marking:

ROXOR (Ultra Finishing Ltd. is a brand of Roxor) on body.

Installation Requirements:

R001 R006 R010

Model:

TEXZ53 - TEC Crosshead (Cross top) Bath Filler Small S Spout, TELZ53 - TEC Lever (Single lever) Bath Filler Small S Spout, TIWZ53 - TEC Industrial (Wheel type) Bath Filler Small S Spout. Models added October 2023: CLXZ53 - Aztec (Cross top) - Bath Filler Small S Spout. Where “Z” denotes the finish and can be replaced with the following: 3 - Chrome, 4 - Matt Black, 8 - Brushed Brass, 5 - Polished Gunmetal, 7 - Brushed Gunmetal.

Manufacturer:

Ultra Finishing Ltd.

Company Name

Ultra Finishing Ltd.

Address

Raikes Lane Industrial Estate, Bolton, Lancashire

Postcode

BL3 2NH

Phone

01282 436934

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201078

Expiry date:

31/01/2027

Size:

½” BSP (M)

Marking:

Clearwater on front of body

Installation Requirements:

R001 R006 R010

Model:

ELB10CP, ELB10BN, ELB10BB, ELB10BZ & ELB10BC COMBINATION TAP ASSEMBLIES

Factor:

Clearwater Products

Company Name

Clearwater Products

Address

Unit 5603 Shannon Place, Tewkesbury Business Park, Tewkesbury

Postcode

GL20 8SL

Country

Gloucestershire

Phone

01684 299555

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 1607023) or non-rising spindle headworks with dome type operating member (model 167021). The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2206317

Expiry date:

30/06/2027

Size:

1/2” BSP (M)

Marking:

PPI on rear body.

Installation Requirements:

R001 R006 R010

Model:

167021 & 167023

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company