Combination Tap Assemblies

Section Code 0490 : Single hole, metal, double outlet, swivel.

Back To Directory Sections

#1904072

Single hole, double outlet (swivel) combination tap assembly (brass body in various finishes) incorporating a ceramic cartridge headwork with single lever operating member. Electronic controls allow the tap to dispense ambient, boiling, chilled or sparkling water from undercounter units which are not included as part of this approval. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C (manual control side - ceramic cartridge) & 100°C (electronic control side).

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
1904072
Expiry date:
30/04/2024
Note:
All push-fit connectors supplied must be installed where light is excluded. R007 applies to all connecting hoses (clear/blue/red silicone, blue/white LLDPE and the stainless steel braided PEX lined hose that is connected to the spout delivering ambient cold/hot/mixed water).
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections (ambient hot and cold supplies). 10mm silicone tubing (boiling water inlet) ¼” LLDPE tubing (chilled ambient or sparkling inlet - model dependent)
Marking:
ZIP on operating member
Installation Requirements:
R001 R006 R007 R009 R010
Model:
Celsius Arc All-In-One range: MT2790 - 94706UK (Chrome). MT2790 - 94707UK (Brushed Chrome). MT2790 - 94708UK (Gloss Black). MT2790 - 94709UK (Matte Black). MT2790 - 94710UK (Rose Gold). MT2790 - 94711UK (Brushed Rose Gold). MT2790 - 94712UK (Gold). MT2790 - 94713UK (Brushed Gold). MT2790 - 94714UK (Platinum). MT2790 - 94715UK (Gunmetal). MT2790 - 94716UK (Nickel). MT2790 - 94717UK (Brushed Nickel).
Celsius Arc All-In-One range: MT2792 - 94706UK (Chrome). MT2792 - 94707UK (Brushed Chrome). MT2792 - 94708UK (Gloss Black). MT2792 - 94709UK (Matte Black). MT2792 - 94710UK (Rose Gold). MT2792 - 94711UK (Brushed Rose Gold). MT2792 - 94712UK (Gold). MT2792 - 94713UK (Brushed Gold). MT2792 - 94714UK (Platinum). MT2792 - 94715UK (Gunmetal). MT2792 - 94716UK (Nickel). MT2792 - 94717UK (Brushed Nickel).
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


#1904337

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The taps also incorporate a self-closing headwork with a single lever operating member which is intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 98°C

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
1904337
Expiry date:
30/04/2024
Note:
This approval covers the tap and inlet hoses only. Additional components are required to dispense near boiling water
Size:
Stainless steel braided silicone lined hose assembly incorporating 3/8” captive nut M8 elbow end connections
Marking:
Pronteau (part of the Norcros Group) on front of body SMR on rear of body
Installation Requirements:
R001 R006 R009 R010
Model:
Prostream, Prostyle, Protex
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company

Print This Approval


#1904363

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks on the left-hand side controlling the hot water flow, and a manual diverter on the right-hand side controlling the cold water flow (forward) or filtered water (backward) all with single lever operating members. The near boiling water flow is activated via a magnetic key fob being placed on the rear of the tap body (boiler unit not supplied). The spout outlet incorporates a plastic aerator. The hot and cold inlet hoses incorporate an approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors for the hot and cold inlet hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C for mixed (ambient hot and cold + filtered water), 98°C for near boiling water outlet.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
1904363
Expiry date:
30/04/2024
Note:
R009 applies to the near boiling water inlet hose. R010 applies to the hot and cold inlet hoses. This product is not supplied with a filter or filter housing or boiler unit, these items are not concerned covered by the scope of the approval.
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections (hot and cold inlets). Stainless steel braided silicone lined flexible hose assembly with ⅜” captive nut end connection (near boiling water inlet hose). 1/8” BSP (F) (filtered water connection)
Marking:
Abode, SMR and date of manufacture etched on body. Date of manufacture in the following format: X1X2XX3. X1 = Day of the month: 1-9 = 1-9, 0 = 10, A-H = 11-18, J-N = 19-23, P-T = 24-28, V-X = 29-31. X2 = Month: a-n = Jan-Dec. XX3 = Year: 19-24 = 2019-2024. E.g. Wd19 = 30th April 2019.
Installation Requirements:
R001 R006 R009 R010
Model:
Profile (4 in 1 trend), Project (4 in 1 modern), Province (4 in 1 classic and 4 in 1 traditional).
Factor:
Abode Home Products Ltd.
Company Name
Abode Home Products Ltd.
Address
Unit L Zenith Park Whaley Road
Postcode
S75 1HT
Country
Barnsley

View All Listings by this Company

Print This Approval


#1909341

Range of single hole, metal double outlet (swivel) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork and a single lever type operating member controlling the mixed supply. Electronic controls allow the tap to dispense ambient and hot from under counter units which are not included as part of this approval. Spout outlets incorporate a plastic aerator and inlets incorporate stainless steel strainers. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C. From April 2020 the taps have a maximum operating temperature of 99°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
1909341
Expiry date:
30/09/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
HotSpot Titanium on body
Installation Requirements:
R001 R006 R009 R010
Model:
15412010 Alessio Chrome Plated 15412030 Alessio PVD finish 15412050 Alessio Black finish 15412020 Adrianna Chrome Plated 15412040 Adrianna PVD finish 15412060 Adrianna Black finish
Factor:
HotSpot Titanium UK Ltd
Company Name
HotSpot Titanium UK Ltd
Address
90 Rockingham Street Sheffield
Postcode
S1 4EB

View All Listings by this Company

Print This Approval


#1909353

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the hot water volume and a half turn ceramic disc headwork both controlling and diverting the supply between a mains cold inlet and alternative third supply - all using single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
1909353
Expiry date:
30/09/2024
Size:
see model
Marking:
SMR on rear of body
Installation Requirements:
R001 R006 R010
Model:
GF3 - Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections. GF4 – 15mm copper tails
Manufacturer:
SAN MARCO RUBINETTERIA S.r.l.
Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray (BI)
Country
Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 7

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.