Combination Tap Assemblies
Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #2309925
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2309925
- Expiry date:
- 30/09/2028
- Size:
- Model IT1008CP 10mm copper tails
Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- Model, date of manufacture (MM/YY) on body.
Inta on operating member.
- Installation Requirements:
- R001 R006
- Model:
-
IT1008CP
IT1008FT
- Factor:
- Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate,
Hixon,
Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199
View All Listings by this Company
WRAS Approval Number: #1906903
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Models VAC BAS E4 C MT & VAC BAS E6 C MT are also supplied with a plastic flow regulator, intended for installation at the inlets.
Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1906903
- Expiry date:
- 30/06/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
- Marking:
- Bristan on operating member.
- Installation Requirements:
- R001 R006 R010
- Model:
-
VAC BAS C MT,
VAC BAS E4 C MT &
VAC BAS E6 C MT.
- Factor:
- Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park,
Pooley Hall Drive,
Dordon,
Tamworth.
Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274
View All Listings by this Company
WRAS Approval Number: #1906703
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks (M0808G model) or non-rising spindle headworks (M0108, M0108F, M0608 & M0808 models) headworks and various operating members (see model). The spout outlet incorporates a plastic flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. The product is supplied with a pop-up waste.
Maximum working pressure 10.0 bar Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1906703
- Expiry date:
- 30/06/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- PPI on rear of body
- Installation Requirements:
- R001 R006 R010
- Model:
-
M0108 (dome type operating member),
M0108F (cross top operating member),
M0608 (cross top operating member),
M0808 (cross top operating member),
M0808G (single lever operating member).
- Factor:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #1905309
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator.
Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1905309
- Expiry date:
- 31/05/2024
- Size:
- Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections
- Marking:
- Herz logo on body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
SQ range: q10 & q12.
Elite range: e10 & e12.
- Factor:
- Herz Valves UK Ltd
Company Name
Herz Valves UK Ltd
Address
Progress House,
Moorfield Point,
Moorfield Road
Postcode
GU1 1RU
Country
Slyfield Industrial Estate,
Phone
+44 1483 502211
General Email
sales@herzvalves.com
View All Listings by this Company - Manufacturer:
- Herz DD
Company Name
Herz DD
Address
GRMASKA CESTA 3
1275 SMARTNO PRI LITIJI
SLOVENIA
General Email
View All Listings by this Company
WRAS Approval Number: #1905360
Range of two hole, single outlet (fixed) combination tap assemblies (various finishes) incorporating ceramic cartridge headwork with single lever operating members.
Maximum working pressure 4.0 bar. Maximum operating temperature 85°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1905360
- Expiry date:
- 31/05/2024
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Kohler on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
Loure DM 14675W-4-**.
‘**’ denotes finish and can be replaced by:
CP – Polished chrome
SN – Vibrant polished Nickel
BN – Vibrant Brushed Nickel
- Factor:
- Kohler UK
Company Name
Kohler UK
Address
Cromwell Road
Cheltenham
GL52 5EP
Phone
+44 (0)1242 283790
General Email
info@kohler.co.uk
View All Listings by this Company
Back To Directory Sections Page 1 of 116