Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Back To Directory SectionsRange of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straighter with a stainless steel strainer or a plastic aerator (62314-7001 and 62461-7401 models only) or nothing (62333-5201 model). The product is supplied with a stainless steel strainer on each inlet hose, metal backnuts and either a click type waste or pop-up waste (6144-7001 and 62314-7001 models only). The inlet hoses of the 60144-7501 model are also supplied with an additional a plastic flow limiter, copper washer and a brass nut. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge with single lever operating members. The spout outlets incorporate a stainless-steel filter. Maximum working pressure 5 bar. Maximum operating temperature 85°C.
single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste, supplied with a plastic flow regulator, intended for installation at the inlets. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (fixed) combination taps (chromium plated brass or gold effect finish brass), incorporating rising spindle headworks and dome or cross top operating members. The spout outlet incorporates a plastic flow straightener. All models apart from the DCM113b model are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet of models 62636-5201, 62636-5101, 63028-5001, 63193-5001, 63197-5001 & 62635-5201 incorporate a plastic aerator. Models 62912-5001 & 62934-5001 incorporate a plastic flow regulator on the inlets. Model 60638-5001 incorporates a plastic flow regulator on the outlet of the ceramic cartridge headwork within the main tap body. The 62636-5101 model is supplied with a click type waste and a combined washer and stainless-steel strainer on each inlet hose. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (variety of finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. Some models incorporate a plastic flow straightener or aerator at the outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks that control both flow and temperature with single lever operating members. The spout outlets incorporate plastic aerators and the products are supplied with a click type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC
Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet combination tap assembly (brass body, various finishes), incorporating a ceramic cartridge headwork, with a single lever operating member. The spout outlet incorporates a plastic aerator, (which from September 2019 has a reduced flow rate). The product is supplied with a ‘lever type’ pop-up waste. Maximum working pressure 5.0 Bar, Maximum operating temperature 60°C.
Page 3 of 58
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.