Combination Tap Assemblies
Section Code 0445 : Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #2112019
A range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork (models 63465-0001) or a quarter turn ceramic disc headwork (model 63461-0001) with single lever operating members.
The products incorporate a pull-out spray with a plastic aerator at the outlet.
The pull-out spray hose for model 63465-0001 incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2112019
- Expiry date:
- 31/12/2026
- Size:
- Stainless steel braided PEX lined flexible hose assembly incorporating a ½” BSP captive nut end connection.
- Marking:
- Lota on body
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
63461-0001
63465-0001
- Manufacturer:
- Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road
Jimei District
Xiamen, 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #2111360
Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and pull out spray handset.
The outlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2111360
- Expiry date:
- 30/11/2026
- Size:
- Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” BSP (F) end connections.
- Marking:
- DTC25 (brand of Methven) on rear of body.
Methven on front of body.
- Installation Requirements:
- R001 R090
- Model:
-
DUSMCP – Dunston Flexi Sink Mixer
Model added October 2023:
INST-MCP-2HKM
- Factor:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2112020
Single hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating a ceramic cartridge headwork with single lever operating members.
The product incorporates a pull-out spray with a plastic aerator at the outlet.
The pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2112020
- Expiry date:
- 31/12/2026
- Size:
- Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connection.
- Marking:
- Lota on body
- Installation Requirements:
- R001 R009 R090
- Model:
-
63395-0201
- Manufacturer:
- Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road
Jimei District
Xiamen, 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #2107335
Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member.
The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection.
The outlet incorporates a plastic aerator.
The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose.
Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2107335
- Expiry date:
- 31/07/2026
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
- Marking:
- Instinct on rear of tap body.
- Installation Requirements:
- R001
- Model:
-
4E1412 - Soyea Chef Chrome Body/Black Spout
4E1423CO - Soyea Chef Brushed Nickel Body/Black Spout
4E1424CO - Soyea Chef White Body/Grey Spout
4E1425CO - Soyea Chef Black Body / Black Spout
- Factor:
- StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6
William Way
Moss Industrial Estate
St Helens Road
Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230
View All Listings by this Company
WRAS Approval Number: #2201006
Range of four-hole, single outlet (swivel) combination tap assemblies (brass bodies, chrome plated or brushed steel finish) with a spout outlet and flexible hand spray outlet.
The hot water is controlled to the spout outlet only (not to the spray outlet) via a quarter turn ceramic disc headwork with single lever operating member.
The cold water to the spout outlet and trigger-operated spray outlet is controlled and diverted via a ceramic disc diverter headwork.
The product is supplied with Stainless steel braided EPDM lined flexible hose assemblies for connection between the headworks and spout.
The spout outlet incorporates a plastic aerator and the products are supplied with metal back nuts.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2201006
- Expiry date:
- 31/01/2027
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
- Marking:
- 1810 on trigger spray operating member.
- Installation Requirements:
- R001 R090
- Model:
-
NOV/01/CH & NOV/02/BS
- Factor:
- The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate,
Queens Lane
Mold
Postcode
CH7 1JR
Phone
0044 7772144600
View All Listings by this Company
Back To Directory Sections Page 9 of 20