Section Code 5240 : Components. All components listed in this section have been tested for water contact suitability of material only.
Back To Directory Sections'Hydropriv PE100 Pipe'. Black coloured (with blue external stripes), extruded PE100 pipe. In January 2024, blue coloured, extruded PE100 'Hydropriv PE100 Pipe' was added to the approval. Both pipes are for use with water up to 23°C.
'Uponor Aqua Pipe'. White coloured, extruded PE-Xa pipe. For use with water up to 85°C.
'PE002'. Blue coloured, extruded HDPE pipe. Between May 2020 and 2nd December 2021, the pipe was for use with water up to 23°C. Between 3rd December 2021 and 31st May 2025, the pipe is for use with water up to 60°C.
'S-Lon HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Reno 100'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.
'Reno 100+'. Dual layered, extruded polyethylene pipe comprising of a black coloured inner and blue coloured outer layer. For use with water up to 23°C.
'Dura.Blu PE 100 Ring (Blue)'. Blue coloured, extruded, ring-shaped polyethylene fitting. For use with water up to 65°C.
'Dura.Blu PE100 Fabricated Fitting'. Blue coloured polyethylene fitting manufactured by extrusion and butt fusion/weding jointing. For use with water up to 65°C.
'Cosmoplast LDPE Pipe'. Black coloured, extruded LDPE pipe. For use with water up to 65°C.
'Fox Spigot and Electrofusion Fittings'. Black coloured, injection moulded polyethylene (PE 100-RC) spigot and electrofusion fittings. For use with water up to 65°C.
'Godavari HDPE Pipe (manufactured from Alathon L4904 & Black masterbatch)'. Black coloured (with blue external stripes), extruded HDPE pipe. For use with water up to 23°C.
'Viega Raxofix PE-Xc/Al/PE-Xc Multilayer Pipe'. Extruded PE-Xc/Al/PE-Xc multilayer pipe comprising of a black coloured PE-Xc inner layer, aluminium middle layer and grey coloured PE-Xc outer layer. For use with water up to 70°C.
'Viega Raxofix, PE-RT/Al/PE-RT Multilayer Pipe'. Extruded, multi-layered pipe comprising of a black coloured PE-RT inner layer, aluminium middle layer and grey coloured PE-RT outer layer. For use with water up to 70°C.
'Hepworth PE 80 & PE 100 Pipes'. The extruded PE 80 pipes are black coloured. The extruded PE 100 pipes are either black or blue coloured. For use with water up to 60°C.
'FRIALEN Safety Fitting' (manufactured from Eltex TUB121). Black coloured (opaque), injection moulded PE100 electrofusion fitting. For use with water up to 60°C.
'D.63 Spigot and Electrofusion Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 23°C.
'FRIALEN Safety Fitting' (manufactured from Hostalen CRP 100 black). Black coloured (opaque), injection moulded PE100 electrofusion fitting. For use with water up to 60°C.
'RAK Universal Plastic Industries L.L.C. HDPE PE100 Black Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
'Qual-PEX Barrier Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
'Polyatlas PE100 Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.
'Pexlife XPE-SIL'. Black coloured, extruded polyethylene pipe. For use with water up to 23°C.
'Cosmoplast HDPE & MDPE Pipes'. Black coloured, extruded polyethylene pipes. For use with water up to 60°C.
'Supreme HDPE Pipe TSIL N'. Black coloured (with blue stripe), extruded polyethylene pipe. For use with water up to 23°C.
'PALCONN PEX-AL-PEX Pipe'. Multi-layered, extruded pipe comprising of a transparent PEX inner layer, aluminium middle layer and white coloured PEX outer layer. For use with water up to 85°C.
'Elofit'. Black coloured, injection moulded, PE100 electrofusion & spigot fittings. For use with water up to 85°C.
'SOFTPEX V® hose inliner'. Off white coloured (translucent), extruded polyethylene hose. For use with water up to 70°C.
'Parixit HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 60°C.
'Parixit HDPE Fitting'. Blue coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'Kuzeyboru HDPE 100 Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.
'Superpipe PE-RT Type 2 Pipe'. Multi-layered, extruded pipe consisting of a white coloured (translucent) PE-RT inner layer, aluminium middle layer and white coloured (opaque) PE-RT outer later. For use with water up to 85°C.
'Revolve M-2638 Black'. Black coloured, polyethylene material manufactured by rotational moulding. For use with water up to 85°C.
'Amiantit Roto Tanks'. White coloured (opaque), LLDPE tank panel manufactured by rotational moulding. For use with water up to 23°C.
'Flomasta Qual-PEX Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
'Black LDPE Tube (IPETHENE 4203) and Semi-White LDPE Tube (IPETHENE 4203)'. Black or white coloured, extruded LDPE tubes. For use with water up to 45°C.
‘AO HDPE Pipe’. Black coloured, extruded polyethylene pipe. For use with water up to 85°C.
`HDPE-IPF Pipe`. Black coloured, extruded HDPE Pipe. For use with water up to 85°C.
'CP Polytec 80A'. Extruded polyethylene pipe comprising of a blue coloured outer layer and black coloured inner layer. For use with water up to 23°C.
'FYPBK-01 PE Pipes Black & Blue'. Extruded, HDPE pipes which are either black coloured (with blue, external stripe) or blue coloured. For use with water up to 65°C.
'FYFBK-01 PE Fittings Black & Blue'. Injection moulded, HDPE fittings which are either black coloured or blue coloured. For use with water up to 65°C.
'Floplast Qual-PEX Barrier Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
‘ELGEF PE-100 electrofusion fittings’, Black coloured, injection moulded polyethylene electrofusion fittings. For use with water up to 65°C.
'MMP PE100 Pipe'. Black coloured (with blue coloured external stripes), extruded PE100 pipes manufactured from 'Sabic P6006' or 'Borouge HE3490-LS'. For use with water up to 85°C.
'Popular HDPE Pipe'. Black coloured (blue external stripes), extruded HDPE pipe. For use with water up to 60°C.
'Lasertec Multilayer Compound Pipes (White)'. Extruded PE-RT/Al/PE-RT pipe comprising of a black coloured, PE-RT Type 2 inner layer, aluminium outer layer and white coloured PE-RT outer layer. For use with water up to 70°C.
'GF PE100 Pipe (product codes beginning with '20014Y')'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.
'Unidelta Flexall'. Extruded, PE-RT/Al/PE-RT pipe comprising of white coloured (translucent) inner layer, aluminum middle later and white coloured (opaque) outer layer. For use with water up to 85°C.
'3301 black (330160415BLK)'. '3301 black (330130415BLK)' was added to the approval in November 2023. Black coloured, single sided polyethylene foam tapes with acrylic adhesive system. For use with water up to 23°C.
'Alpertsol PERT/AL/PERT Pipe'. Extruded, composite pipe comprising of a white coloured PERT inner layer, aluminium middle layer and white coloured PERT outer layer. For use with water up to 85°C.
`Como-Pex Pipe`. Extruded, white coloured HDPE pipe. In April 2024, `Como-Pex Pipe`, extruded, black coloured HDPE pipe was added to the approval. Both pipes are for use with water up to 85°C.
‘Union Pipes Industry – K.S.A. HDPE Pipe’, manufactured from ‘P6006’ by Union Pipes Industry Co. Ltd, Rabigh, Saudi Arabia. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'BORFIT HDPE fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Dhara HDPE Black Pipe'. Black coloured (with blue outer stripes), extruded HDPE pipe. For use with water up to 65°C.
'Dhara MDPE Blue Pipe'. Blue coloured, extruded MDPE pipe. For use with water up to 65°C.
'LSPE-BE002 PE Pipe (Deep Blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 60°C.
'LSPE-BE002 PE Fitting (Deep Blue)'. Blue coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'LSPE-BK001'. Black coloured, extruded polyethylene pipe. For use with water up to 60°C.
'LSPE-BK001'. Black coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'ajpipe HDPE Pipe'. Black coloured (with blue external stripes), extruded PE100 pipe. For use with water up to 50°C. From January 2024 the pipe is for use with water up to 60°C.
'Sureline I'. Black coloured (with blue longitudinal lines), extruded PE100 pipe. For use with water up to 23°C.
'QPLAST Pressure Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.
'100 US Gallon Dubai Polytank Panel'. Triple layered, rotationally moulded LLDPE tank panel comprising of a white coloured inner layer, black coloured middle layer and white coloured outer layer. For use with water up to 65°C.
'Radius Systems Socket Fittings and Saddle Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 60°C.
'Revolve 6402U'. White coloured (translucent), polyethylene material manufactured by rotational moulding. For use with water up to 85°C.
'PE-BWG'. Transparent, extruded, single layer, polyethylene hose. In July 2023, 'PE-BWG Black', a black coloured (opaque), extruded, single layer, polyethylene hose was added to the approval. For use with water up to 85°C.
'Al Bassam High Density Polyethylene Underground Water Tank Panel'. Black coloured, blow moulded HDPE tank panel which is available with three or four layers (of the same material). For use with water up to 65°C.
'Al Bassam High Density Polyethylene Aboveground Water Tank Panel'. Blow moulded HDPE tank panel which comprises of four layers and has a black coloured water contact layer, red and black coloured inner layers and white coloured outer (non-water contact) layer. For use with water up to 65°C.
'Heliklima PE-RT/AL/PE-RT pipes'. Triple layered, extruded pipe comprising of a white coloured (translucent) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'BKBB-660'. Black coloured LLDPE 'buoyant body' manufactured by rotational moulding. For use with water up to 23°C.
'XSPE-GPE01'. Black coloured (with blue stripes), extruded polyethylene pipe. For use with water up to 23°C.
'WTST1 Water Tank Sealing Tape'. Black coloured PE foam tape which is adhesive on the non-water contact side. For use with water up to 23°C.
‘EURO electrofusion fitting'. Black coloured, injection moulded HDPE electrofusion fitting. For use with water up to 85°C.
'Shield MDPE Fitting'. Black coloured, injection moulded PE80 fitting. For use with water up to 85°C.
'Shield MDPE Pipe'. Black coloured, extruded PE80 pipe. For use with water up to 85°C.
'SP-01 HDPE Fitting'. Black coloured, injection moulded HDPE fittings. For use with water up to 23°C.
`Comisa' pipe. Triple layered, extruded pipe consisting of a translucent PE-RT inner layer, aluminum middle layer and white coloured PE-LMD outer layer. For use with water up to 85°C.
'+GF+ HAKAN PE-RT White Pipe'. White coloured (opaque), extruded PE-RT pipe. For use with water up to 85°C.
'+GF+ HAKAN PE-XB White Crosslinked Pipe'. White coloured (opaque), extruded PE-XB pipe. For use with water up to 85°C.
'+GF+ HAKAN PE-RT EVOH Pipe'. Extruded pipe with a white coloured (opaque) PE-RT inner layer and an orange coloured EVOH outer layer. For use with water up to 85°C.
`Water Line`. Black coloured (with external blue stripes), extruded polyethylene pipe. For use with water up to 23°C.
'AO Roto Water Tank Panel'. White coloured, LLDPE tank panel manufactured by rotational moulding. For use with water up to 60°C.
'PlastFast/Plast Electrofusion Fittings'. Black coloured, injection moulded HDPE electrofusion fittings. For use with water up to 85°C.
'Uponor Combi Pipe'. Multi-layered, extruded PEX pipe comprising of an uncoloured (translucent) inner layer, uncoloured EVOH middle layer and white coloured outer layer. For use with water up to 85°C.
'Como-Flex'. Black coloured and blue coloured, extruded polyethylene pipes. For use with water up to 23°C.
'Aion MDPE Pipe'. Blue coloured, extruded MDPE pipe. For use with water up to 65°C.
'Aion HDPE Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 65°C.
`HYDROFAS'. Black coloured, extruded polyethylene (PE 80) pipe. For use with water up to 23°C.
'Retiflex PE-Xb'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. ‘RETIFLEX PEXb black’ was added to the approval in October 2024. Black coloured, extruded, single-layered PE-Xb tubing. Both tubes are for use with water up to 85°C.
'LIC PEX-b'. White (translucent), extruded PEX-b pipe. For use with water up to 85°C.
'Green Pipes HDPE Pipes'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 65°C.
'Green Pipes HDPE Fittings'. Black coloured (with blue external stripe), fabricated butt-fusion HDPE fittings. For use with water up to 65°C.
'PF Press'. Triple layered, extruded pipe comprising of a white coloured (translucent) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'XD PE Fitting'. Black coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'NEWPRO HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
`Peak Pipe Systems PE100 Pipe`. Dual layered, co-extruded polyethylene pipes consisting of a black coloured inner and blue coloured outer layer. For use with water up to 23°C.
'Pextec Plus Silver'. Triple layered, extruded pipe consisting of a black coloured PE-Xc inner layer, an aluminium middle layer and a silver/grey coloured PE-Xc outer layer. For use with water up to 70°C.
'Pextec Plus White'. Triple layered, extruded pipe consisting of a black coloured PE-Xc inner layer, an aluminium middle layer and a white coloured PE-Xc outer layer. For use with water up to 70°C.
'MT PE-Xc/AL/PE-X Pipe' (formerly known as 'Hewing MT PE-Xc/AL/PE-X multi layer pipe'). Extruded, multi-layered pipes comprising of an off-white (translucent), PEX-Xc inner layer, aluminium middle layer and white coloured (opaque), PE-Xb outer layer. For use with water up to 85°C. Please note that the pipes will be marked with 'WRAS 2111538'. Pipes which do not have this marking are not covered by the scope of the approval.
'Instantor® Pex'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. For use with water up to 85°C.
'Lasertec PE-RT/Al Multi-layered Pipe'. Extruded PE-RT pipe comprising of a black coloured inner, aluminium barrier layer and silver-grey coloured outer layer. For use with water up to 70°C.
'DBS0420-DBS0640'. Orange coloured HDPE ball float, manufactured by blow moulding. For use with water up to 23°C.
'CPI Electrofusion fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'CPI HDPE Pipes'. Black coloured (with blue external stripes), extruded HDPE pipes. For use with water up to 65°C.
'NAFF ZPE PE40 LDPE'. Black coloured (with blue external stripes), extruded LDPE pipe. For use with water up to 23°C.
'CORREX®, Q-GUARD® & S-PATRON® PE-Xc Anode Frame (Clip)'. Cream coloured, injection moulded PE-Xc clip components. For use with water up to 85°C.
'CORREX®, Q-GUARD®, S-PATRON® & HYTONIC® PE-Xc Anode Gasket'. Cream coloured, injection moulded PE-Xc gaskets. For use with water up to 85°C.
'002DP48 Aiva Electrofusion Fittings'. Blue coloured, injection moulded HDPE electrofusion fittings. For use with water up to 23°C.
'Kott-Glide 2.0'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
‘Kingbull PE100 blue pipe (391721)'. Blue coloured, extruded polyethylene pipe. ‘Kingbull PE100 black pipe’ (0103102). Black coloured (with external blue stripe), extruded polyethylene pipe. Both for use with water up to 65°C.
'EGPI HDPE BL-W Pipe'. Black coloured, (with blue coloured external stripe), extruded HDPE pipe. For use with water up to 85°C.
'C40'. White coloured, extruded polyethylene pipe. For use with water up to 85°C.
'K9'. White coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Polygon Polyethylene Pipe'. Black coloured or blue coloured, single layered, extruded polyethylene pipe. For use with water up to 23°C.
'LSPE-BE001 PE Pipe (Blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 60°C.
'Georg Fischer HDPE PE100 Black Machined Fabricated Fittings and Segmented Fabricated Fittings'. Black coloured, HDPE PE100, machined fabricated fittings. Black coloured, with or without blue stripe, extruded and fabricated, HDPE PE100 fabricated segmented fittings. For use with water up to 60°C.
'EB AQUAFLEX Cable'. Blue coloured, extruded polyethylene electrical cable. For use with water up to 23°C. Please note that, due to the way this cable was tested, this approval is valid only when the outer sheath is the layer in contact with water.
‘Kingbull PE100 blue pipe (391721)'. Blue coloured, extruded polyethylene pipe. ‘Kingbull PE100 black pipe’ (0103102). Black coloured (with external blue stripe), extruded polyethylene pipe. Both for use with water up to 65°C.
'HDPE 100 Black POLIMAXX P901BK'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'HDPE 100 Blue POLIMAXX P901BL'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Protecta-line Pipes PE80 & PE100 Pipes'. Extruded, multi-layered pipes comprising of a black coloured PE80 or PE100 inner layer, aluminium middle layer and blue coloured PE80 or PE100 outer layer. The pipes have a black external stripe. For use with water up to 23°C.
'Polygon Polyethylene Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 23°C.
'Vialli PEXa Pipe'. White coloured (translucent), extruded PEXa pipe. For use with water up to 85°C.
‘PE-Xc PENTA Pipe’ (formerly known as 'Hewing PE-Xc PENTA Pipe (off-white or beige)'. The extruded pipes have either an off-white (natural) OR a beige coloured, polyethylene inner and outer layer. The middle layer is EVOH (oxygen barrier). Both for use with water up to 85°C.
'PRESTO electrofusion fitting'. Black coloured, injection moulded, polyethylene electrofusion fitting. For use with water up to 23°C.
'Radius Systems Puriton II LB Pipe'. Extruded, triple layered pipe consisting of a black coloured polyethylene inner layer, aluminium middle layer and blue coloured polyethylene outer layer. For use with water up to 23°C.
'IRRIPLASTEC PE 100 WATER'. Dual layered, extruded pipe comprising of a white coloured (opaque), PE inner layer and a black coloured, PE outer layer. For use with water up to 23°C.
'004DP44 Aiva Composite Saddle'. Blue coloured, injection moulded HDPE fitting. For use with water up to 23°C.
'PRESTO electrofusion tapping saddles'. Blue coloured, injection moulded polyethylene electrofusion tapping saddles. For use with water up to 23°C.
'Al Jubail PE100 Pipe'. Black coloured, extruded HDPE Pipe. For use with water up to 70°C.
'DH-01 Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'DH-02 Fitting'. Blue coloured, injection moulded HDPE fitting. For use with water up to 65°C.
'PEXROMA PE-Xa pipe'. Off-white coloured (translucent) polyethylene pipe. For use with water up to 85°C.
`Hydro Dynamic PE100 Pipes`. Black coloured, extruded polyethylene pipes. For use with water up to 60°C.
'Shield PE100 Segmented Fittings'. Black coloured fittings manufactured by extrusion and butt-fusion. For use with water up to 85°C.
'Shield PE 100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 85°C.
'Plastherm PEXa Pipe'. White coloured, opaque, extruded PEXa pipe. For use with water up to 85°C.
'Unatherm Yellow'. Light yellow coloured, extruded PE-Xc pipe. For use with water up to 85°C.
'Unatherm White'. Off-white coloured, extruded PE-RT pipe. For use with water up to 85°C.
'Poseidon Cable' (3 x 1.5mm, 4 x 1.5mm, 3 x 1.0mm & 4 x 1mm). Blue coloured (external water contact layer), extruded, XLPE electrical cable. For use with water up to 65°C.
'Maximetal PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (appears white coloured/translucent) inner layer, aluminium barrier layer and white coloured outer layer. For use with water up to 85°C.
"Reinert-Ritz PE 100 Fittings". Black coloured, extruded polyethylene fittings. For use with water up to 85°C.
'Jain HDPE (PE 100) Blue Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Jain HDPE (PE 100) Black Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
‘VP1620-WR & VP-2020-WR’. Single layer, cream coloured, extruded PEX-b tubes. For use with water up to 85°C.
‘Al Bilad Polyethylene and Polypropylene Pipes Factory HDPE Pipe’. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'Radius Systems Light Blue SC80 Pipe'. Extruded, dual layered pipe consisting of a black coloured PE80 inner layer and blue coloured PE80 outer layer. For use with water up to 23°C.
'POLYAOUN non-insulated Water Tank Panel'. LDPE tank panel, made by roto-moulding, comprising of a white coloured inner & outer layer and black coloured middle layer. For use with water up to 85°C.
'POLYAOUN insulated Water Tank Panel'. LDPE tank panel, made by roto-moulding, comprising of white coloured, inner and outer layer, black coloured 2nd layer and grey coloured 3rd layer. For use with water up to 85°C.
'SPS HDPE Pipe'. Black coloured (with blue stripes), extruded PE 100 pipe. For use with water up to 85°C.
'JRG Sanipex MT Multilayer Pipe'. Triple layered, extruded PE-Xc/Al/PE-Xb pipe consisting of a cream coloured inner, aluminium barrier layer and black coloured outer layer. For use with water up to 85°C.
'SAPPCO PE100 Black Pipe'. Black coloured, extruded polyethylene pipe which has blue stripes on the outside. For use with water up to 65°C.
'Weixing HDPE Pipes'. Black (with blue stripe) or blue coloured, extruded HDPE pipes. For use with water up to 23°C. From January 2023 the pipes are suitable for use with water up to 85°C.
‘Viega Smartpress PE-Xc/Al/PE-Xc Multilayered pipe’. Extruded, multi-layered pipe comprising of a natural (appears clear, translucent) PE-Xc inner layer, aluminium barrier layer and white coloured PE-Xc outer layer. For use with water up to 70°C.
‘Viega Smartpress PE-Xc/Al/PE-Xc Multilayered pipe’. Extruded, multi-layered pipe comprising of a black coloured PE-Xc inner layer, aluminium barrier layer and white coloured PE-Xc outer layer. For use with water up to 70°C.
'Weixing HDPE Fitting blue'. Blue coloured, injection moulded HDPE fitting. Added in January 2023: 'Weixing HDPE Fitting black'. Black coloured, injection moulded HDPE fitting. For use with water up to 85°C.
'Borfit HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'Shield HDPE PE 100 Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 85°C.
‘Dura-Line HD100 B Pipe’. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 60°C.
'PE-BWG'. Transparent, extruded, single layer, polyethylene hose. For use with water up to 85°C.
'NTG PE100 Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Polypipe Blue PE 80 Pipe'. Blue coloured, extruded polyethylene pipe. For use with water up to 23°C.
'Polypipe Black PE80 Pipe'. Black coloured, extruded polyethylene pipe. For use with water up to 23°C.
'Supreme PE Electrofusion Fittings'. Black coloured, injection moulded polyethylene (PE 100) electrofusion fittings. For use with water up to 65°C.
'Trustlene PE-80 Fittings'. Black coloured, injection moulded, PE80 electrofusion fittings. For use with water up to 23°C.
'DR-PLAST HDPE PE-100 Pipes'. Black coloured (with dark blue stripe), extruded HDPE pipe. For use with water up to 60°C.
'DR-PLAST HDPE PE-100 Fittings'. Black coloured, HDPE fittings manufactured by either injection moulding or butt fusion welding. For use with water up to 60°C.
'Poly Emirates LLDPE Water Tank Panel'. Multi-layered LLDPE tank panel. manufactured by rotational moulding, which comprises of a white coloured inner & outer layer and a black coloured middle layer. For use with water up to 85°C.
'CLH Hose'. Single layer, extruded, clear (transparent), LDPE hose. For use with water up to 70°C.
'Aura HDPE Electrofusion Fittings'. Black coloured, injection moulded HDPE (PE100) electrofusion fittings. For use with water up to 65°C.
'Mais' pipe. Black coloured (with blue external stripes), extruded, PE100 HDPE pipe. For use with water up to 65°C.
'Flow Reducer Bp V2 ½ 34 9957, Flow reducer Bp V2 ½ short 34 9965 blue & Flow reducer Bp V2 3/8 short 34 9966 blue’. Blue coloured, injection moulded HDPE flow reducers. For use with water up to 23°C.
'Filter 99 3/8 349971 Dark Grey & Filter 99 ½ 349970 Light Grey'. Grey coloured, injection moulded HDPE filters. For use with water up to 23°C.
'ITS PE100 Fittings'. Black coloured, extruded polyethylene fitting. For use with water up to 60°C.
'Trustlene PE-80 Fittings'. Blue coloured, injection moulded, PE80 electrofusion fittings. For use with water up to 23°C.
'Neproplast HDPE PE100 Pipes'. Black coloured, extruded HDPE pipes. For use with water up to 60°C.
'Kingbull PE100 Blue Fitting (391740)'. Blue coloured, injection moulded polyethylene fitting. 'Kingbull PE100 Black Fitting (0103208)'. Black coloured, injection moulded polyethylene fitting. Both for use with water up to 65°C.
'Sierra PE-100 pipes'. Blue coloured, extruded PE-100 pipes. For use with water up to 65°C.
'Iglidur® UW160 Bearing'. Grey coloured, injection moulded PE bearing. For use with water up to 85°C.
'Kingbull PE100 Blue Fitting (391740)'. Blue coloured, injection moulded polyethylene fitting. 'Kingbull PE100 Black Fitting (0103208)'. Black coloured, injection moulded polyethylene fitting. Both for use with water up to 65°C.
'Pipex PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (appears white coloured/translucent) inner layer, aluminium barrier layer and white coloured outer layer. For use with water up to 85°C.
'UGPM HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'P600 BL & P301E BL'. Black coloured, extruded polyethylene pipes. For use with water up to 23°C.
'GPS Black PE100 Type V Pipe'. Black coloured, extruded PE100 pipe. For use with water 23°C.
'Prineto'. Black coloured, extruded PE-X pipe. For use with water up to 85°C.
'Topline PE100 HDPE Electrofusion/Butt Fusion Fitting'. Black coloured, injection moulded, PE100 (HDPE) fitting. For use with water up to 23°C.
'S-Ion PE100 Fittings'. Blue coloured, injection moulded PE100 fittings. For use with water up to 65°C.
'GPS Excel Black PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'LK PAL Universal Pipe'. Extruded, multi-layered pipes comprising of a translucent PE-RT inner layer, aluminium barrier layer and white coloured PE-RT outer layer. For use with water up to 85°C.
'SABFUSE'. Black coloured, injection moulded polyethylene fittings. For use with water up to 60°C.
'National Brand PE Pipe'. Blue coloured, extruded PE100 pipe. For use with water up to 65°C.
'Plumtek Pipe & Euroaqua Pipe'. Grey coloured, extruded PE-RT Pipe. For use with water up to 85°C.
'EPPI-PE'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'UPIPIPE'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'PUHUI HDPE Pipe Black' & 'PUHUI HDPE Pipe Blue'. Extruded HDPE pipes available in black & blue colours. For use with water up to 85°C.
'PUHUI HDPE Fittings Black' & 'PUHUI HDPE Fittings Blue'. Injection moulded HDPE fittings available in black & blue colours. For use with water up to 85°C.
'Agruline Fitting'. Black coloured, injection moulded, polyethylene fitting. For use with water up to 85°C.
'LHS001P'. Off-white (translucent), extruded PEX hose. For use with water up to 60°C.
'SCGC HDPE H1000PCH Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
'Almuftah Water Tank Panel'. LLDPE panel consisting of a white coloured inner and outer layer and a black coloured middle layer, manufactured by rotational moulding. For use with water up to 55°C.
'Jingtong HDPE Pipe'. Black coloured (with blue external lines), extruded HDPE pipes. For use with water up to 65°C.
'Jingtong HDPE Fitting'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'Presto Sealing Ring'. White coloured (opaque), injection moulded PE sealing ring. For use with water up to 23°C.
'Taldeen Electrofusion Fitting'. Black coloured, injection moulded, PE100 Electrofusion Fitting. For use with water up to 85°C.
'Taldeen PE100 Pipe'. Black coloured (with blue external stripe), extruded, PE100 Pipe. For use with water up to 85°C.
'Jain HDPE (PE 100) Blue Fittings). Blue coloured HDPE fittings manufactured by injection moulding or extrusion. For use with water up to 65°C.
'Bentlay's Electrofusion Saddle'. Black coloured, injection moulded HDPE electrofusion fitting. For use with water up to 23°C.
'Rainson HDPE (PE100)'. Black coloured, injection moulded HDPE (PE100) material. For use with water up to 23°C.
‘FLEXCORE® hose inliner’. Single layered, white coloured (translucent), extruded, corrugated polyethylene hose. For use with water up to 85°C.
'TEGA PE100 fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 60°C.
'Roxy For Metal And Plastic Products Pipe'. Black coloured (with blue external stripes), extruded HDPE pipe. For use with water up to 23°C.
'MANARCO HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 85°C.
'Stars Water Tank Panel'. Multi-layered, roto-moulded LLDPE/PE foam panel comprising of a white (opaque) water contact layer, off-white (translucent) second layer, black (opaque) third layer and white (opaque) outer layer. For use with water up to 65°C.
'DERINSU PE100 Fitting'. Black coloured, injection moulded PE100 fitting. For use with water up to 60°C.
'UNIDELTA Electrofusion Fitting'. Black coloured, injection moulded PE100 Electrofusion Fitting. For use with water up to 60°C.
'Cosmoplast Butt Fusion Fitting'. Black coloured, polyethylene butt-fusion fitting. For use with water up to 60°C.
'Sesta Multi-layered Pipe'. Extruded PEX-AL-PEX pipe comprising of a natural (white, translucent) PEX inner layer, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'SLA Barrier Pipe' (formerly known as ‘Egeplast SLA Pipe’). Extruded, triple layered pipe consisting of an black coloured PE 100 inner layer, aluminium middle layer and blue coloured (with brown coloured longitudinal stripe) PE 100 outer later. For use with water up to 23°C.
'Solerad PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'Q-Therm'. White coloured, extruded PEX pipes. For use with water up to 85°C.
'Hakathen Pipe'. Multi-layered, extruded pipe comprising of a natural (off-white coloured) polyethylene inner layer, aluminium middle layer and white coloured, polyethylene outer layer. For use with water up to 85°C.
‘Palaplast Hydropal W PE80 & PE100 pipes’. Extruded, PE80 & PE100 pipes, both available in either blue colour or black colour (with blue stripe). All pipes are for use with water up to 23°C.
‘Polypipe Black PE100 & Blue PE100 Pipes’. Black or blue coloured, extruded PE100 pipes. For use with water up to 23°C.
'Aquaflex PE-80'. Blue coloured, extruded HDPE pipe. For use with water up to 23°C.
'NADIR PLUS HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 40°C.
'NADIR PLUS HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 40°C.
'Akansu Plastik HDPE Pipe'. Extruded HDPE pipes available in blue or black colours. For use with water up to 65°C.
'MISSOURI BLU & MISSOURI NATURAL'. Extruded, blue coloured and natural (appears off-white, translucent) PEX hoses. For use with water up to 85°C.
'Sunplast PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'FRIALEN Safety Fittings'. Black coloured, PE100 fittings which are injection moulded or machined from an extruded pipe. Blue coloured PE100 fittings which are injection moulded. For use with water up to 23°C.
'AUMIX PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'3-layers Stars Water Tank Panel'. Three-layered, roto-moulded LLDPE foam panel comprising of a white (opaque) water contact layer, black (opaque) middle layer and white (opaque) outer layer. For use with water up to 65°C.
'AQUA Cable®'. Extruded, blue coloured cable with polyethylene sheath (water contact layer), available with between 1 and 5 metallic cores and a wall thickness of between 1.2mm & 5.9mm. For use with water up to 23°C.
'JRG Sanipex MT ECO Pipe'. Multi-layered, extruded pipe comprising of a natural (off-white coloured) polyethylene inner layer, aluminium middle layer and white coloured, polyethylene outer layer. For use with water up to 85°C.
`Polyguard Blue PE80 Barrier Pipe`. Triple layered, extruded barrier pipe consisting of a blue coloured polyethylene inner layer, aluminium middle layer and blue coloured polyethylene outer layer (with red or brown coloured stripes). For use with water up to 23°C.
'Hepworth HDPE PE 100 Pipe (black) & HDPE PE 100 Pipe (black with blue stripes)'. Extruded polyethylene pipes. For use with water up to 60°C.
'MT PE-RT/AL/PE-RT Pipe' (formerly known as 'Hewing PE-RT/AL/PE-RT Pipe'). Extruded, multi-layered pipes comprising of a translucent PE-RT inner layer, aluminium barrier layer and white coloured PE-RT outer layer. For use with water up to 85°C.
'Almona PE100 Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 85°C.
'Deltaqua PE Pipe'. Black coloured (with blue stripe), extruded polyethylene pipe. For use with water up to 85°C.
'Fusamatic Electrofusion Fittings'. Black coloured, injection moulded, polyethylene Electrofusion Fittings (made in UK from Ineos Eltex TUB121 & Hostalen CRP 100 Resist CR Black). In December 2023, Electrofusion Fittings made in Anhui Province China from Borouge Borsafe HE3490-LS & Hostalen CRP 100 Resist CR black were added to the approval. For use with water up to 60°C.
'Fusamatic Electrofusion and Spigot Fittings'. Black coloured, injection moulded, polyethylene Electrofusion and Spigot Fittings (made from Ineos Eltex TUB121, Hostalen CRP 100 Resist CR Black & Borouge Borsafe HE3490-LS). For use with water up to 60°C.
'Fusamatic Electrofusion and Spigot Fittings'. Black coloured, injection moulded, polyethylene Electrofusion and Spigot Fittings (made from Ineos Eltex TUB121, Hostalen CRP 100 Resist CR Black & Borouge Borsafe HE3490-LS). For use with water up to 60°C.
‘HELUPOWER® AQUATIC-750-BLUE’. Extruded, blue coloured cable with polyethylene sheath (water contact layer), available with between 1 and 5 metallic cores and a wall thickness of between 1.2mm & 5.9mm. For use with water up to 23°C.
'Sunplast HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 23°C.
‘AL ZAMIL roto moulded tank panel’. White coloured, roto-moulded, multi-layered PE tank panel. For use with water up to 60°C.
‘AL ZAMIL blow moulded tank panel’. Pale blue coloured, blow-moulded, multi-layered PE tank panel. For use with water up to 60°C.
'KAN-therm ultraPRESS PERTAL'. White coloured, extruded PE-RT/Al/PE-RT pipe. For use with water up to 65°C.
'Danco Aquaflex PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'Theoheat PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (appears white coloured/translucent) inner layer, aluminium barrier layer and white coloured outer layer. For use with water up to 85°C.
'METALPERT'. Extruded PE-RT/Al/PE-HD barrier pipe comprising of a white coloured PE-RT inner layer, aluminium middle layer and white coloured PE-HD outer layer. For use with water up to 85°C.
'Elysee Wise PE100 Pipe'. Black coloured (with blue, external stripe), extruded HDPE pipe. For use with water up to 23°C.
'Kimplas Trustlene PE100 Electro-fusion fittings'. Black coloured, injection moulded Electro-fusion fittings. For use with water up to 65°C.
'Smart Joint Fitting'. Blue coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Smart Joint Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'Smart Joint Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 60°C.
'Smart Joint Pipe'. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 60°C.
'iFIT Pipe'. Multi-layered, extruded pipe comprising of a natural (off-white coloured) polyethylene inner layer, aluminium middle layer and white coloured, polyethylene outer layer. For use with water up to 85°C.
'GS100ElPLAST'. Black coloured, extruded high density polyethylene pipe. For use with water up to 23°C.
'GS100ELPLAST'. Blue coloured, extruded high density polyethylene pipe. For use with water up to 23°C.
'Ashirvad electrofusion fitting'. Black coloured, injection moulded, polyethylene electrofusion fitting. For use with water up to 23°C.
'ecoFIT PE 100 Pipe'. Black coloured, extruded PE pipe. For use with water up to 23°C.
'Comisa EVO Pipe'. Extruded PE-RT/Al/PE-HD barrier pipe comprising of a white coloured PE-RT inner layer, aluminium middle layer and white coloured PE-HD outer layer. For use with water up to 85°C.
'Simona PE100 black fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'ELYSEE HDPE PE 100' & 'ELYSEE HDPE PE 80' pipes. Black coloured (with blue lines), extruded PE 100 & PE 80 Pipes. For use with water up to 23°C.
'RBM PE40 potable water pipe'. Black coloured (with blue external stripes), extruded LDPE pipe. For use with water up to 23°C.
'Balpex'. Extruded PEX-Al-PEX pipe comprising of an off-white coloured inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
`Simona Peak Pipe Systems PE100 Pipe`. Black coloured, extruded PE100 pipes. For use with water up to 23°C.
'Supreme PE Pipe TSIL G'. Black coloured (with blue stripes), extruded PE 100 pipe. For use with water up to 60°C.
'Kalde PE-X'. Off-white coloured, extruded PE-X pipe. For use with water up to 65°C.
'Power Plastic HDPE Pipe'. Black coloured, extruded HDPE pipe (manufactured from SABIC P6006). For use with water up to 85°C.
'AGRULINE PE100RC Pipe'. Black coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Jain MDPE (PE 80) Pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 65°C.
'EGPI MDPE BL-W Pipe'. Black coloured (with blue stripes), extruded MDPE pipe. For use with water up to 85°C.
'DFC White HDPE Float 025RBX006HP'. White coloured, extruded and machined HDPE float component. For use with water up to 65°C.
'ProWarm PERTAL'. White coloured, extruded PE-RT/Al/PE-RT pipe. For use with water up to 65°C.
'Aquaflex'. Red coloured, extruded PEX-b pipe. For use with water up to 23°C.
'LK PE-Xa pipe'. The pipes are either single layered or multi-layered (3 or 4 layers). The single layered, extruded pipes are natural (off-white coloured) PE-Xa. The multi-layered, extruded and IR cross-linked pipes have a natural (off-white coloured) PE-Xa inner layer, an adhesive layer, an oxygen barrier layer based on EVOH and then an optional 4th, adhesive layer. All are for use with water up to 85°C.
'BWRB1620200'. In July 2024 the following pipes were added to the approval: ‘BWRB1620100, BWRB2020200, BTRB2525100 & BTRB3230100. Triple layered, extruded pipes consisting of an off-white coloured PERT inner layer, aluminium middle layer and white coloured PERT outer layer. For use with water up to 85°C.
'PARIXIT HDPE PIPE'. Black coloured (with blue coloured stripes), extruded HDPE pipe. For use with water up to 65°C.
‘Drinkflex Aquarius 3G1, 3G1,5, 3G2,5, 3G4, 4G1, 4G1,5, 4G2,5, 4G4 & 4G6’ range of polyolefine cables. The cables have an extruded, blue coloured polyolefine outer (water contact) layer and are available with 3 or 4 internal cores. For use with water up to 23°C.
'Pexgol Pipe'. White coloured (transcluent), extruded PE-Xa pipe. For use with water up to 70°C.
'Binh Minh Plastic's HDPE pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 40°C.
'Unidelta Uniterm PEX Pipe'. Off-white coloured (opaque), extruded PEX pipe. For use with water up to 85°C.
'Neama Liner Sand Filter'. Off-white coloured (translucent), rotationally moulded LLDPE filter. For use with water up to 65°C.
'Cosmoplast HDPE Pressure Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 65°C.
'PIMTAS PLASTIK PE 100 Pipes'. Extruded, PE100 pipes available in black and blue colours. For use with water up to 85°C.
'INVA by Rarean'. Black coloured (with blue external stripe), extruded PE pipe. For use with water up to 65°C.
'P5003D-B. Black coloured, injection moulded PE fitting. For use with water up to 23°C.
'Spectrum Polyethylene Netting'. White coloured, extruded polyethylene netting. For use with water up to 23°C.
'Ozdoganplast HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up 23°C.
'P5003D-B. Black coloured, injection moulded PE fitting. For use with water up to 23°C.
'P5003D-B. Black coloured, injection moulded PE fitting. For use with water up to 23°C.
'Novatherm PEX Pipe'. White coloured (opaque), extruded PEX pipe. For use with water up to 65°C.
`Simona Peak Pipe Systems PE80 Pipe`. Blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'Kingfisher Qual-PEX Barrier Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
'Saudi Drip HDPE PE100 pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'Uponor PE 100 RC Pipe'. Black coloured (with blue external stripe), extruded PE pipe. For use with water up to 23°C.
'XD dn32X32 HDPE Pipe Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 23°C.
'Stabil Multilayer Pipe'. Triple layered, extruded pipe consisting of a white coloured PE-X inner layer, aluminium middle layer & white coloured outer layer. For use with water up to 70°C.
'Maincor MLC Pipe'. Triple layered, extruded PERT/Al/PERT pipe consisting of a white coloured inner layer, grey coloured middle layer and a white coloured outer layer. For use with water up to 85°C.
'CDPLAST - High Precision Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 23°C.
'ComoPexAl Pipe'. Extruded multi-layered pipe comprising of a white coloured (opaque) PEX-b inner layer, aluminium middle layer and white coloured (opaque) PEX-b outer layer. For use with water up to 23°C.
'National Brand PE100, HDPE Fabrication Fittings & National Brand PE100, HDPE Injection Moulded Fittings'. Blue coloured butt fusion fabricated or injection moulded HDPE fittings. For use with water up to 65°C.
'KTM PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of an off-white coloured (translucent) PE-RT inner layer, aluminium middle later and white coloured (opaque) PE-RT outer layer. For use with water up to 85°C.
'ERA PE Fitting'. Black coloured, injection moulded PE fitting. For use with water up to 60°C.
'Unidelta Spigot Fitting'. Black coloured, injection moulded PE100 spigot fitting. For use with water up to 60°C.
'Hyperzone HY4008'. Off-white coloured, compression moulded PE material. For use with water up to 23°C.
'Coolpipe'. Black coloured (with or without blue external stripe), extruded HDPE pipe. For use with water up to 85°C.
'METALPERT XT'. Extruded, multi-layered PERT/Al/PERT pipe comprising of a natural (appears off-white) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'Qual-PRESS ML PRO Aluminium Barrier Pipe'. Extruded, PE-RT/Al/PE-RT comprising of a white, translucent inner layer, aluminium middle layer and white, translucent outer layer. For use with water up to 85°C.
'Vissen Multilayer Pipe'. Extruded, PERT-Al-PERT pipe comprising of am off-white (translucent) inner layer, aluminium middle layer and white coloured (opaque) inner layer. For use with water up to 85°C.
‘LWF LTD FIBRE™MESSENGER PIPE 10/6’. Black coloured, extruded, flexible HDPE pipe. For use with water up to 23°C.
'Cool-FIT 4.0 & 2.0 Pipes'. Triple layered, extruded polyethylene pipe which comprises of a black coloured inner layer, off-white coloured insulation layer and black coloured outer layer. For use with water up to 65°C.
'Cool-FIT 4.0 & 2.0 Fittings'. Triple layered, injection moulded electrofusion fittings which comprise of black coloured inner layer, ivory coloured insulation layer and black coloured outer layer. For use with water up to 65°C.
'DEF HDPE Pipe'. Black coloured (with blue coloured external stripe), extruded HDPE pipe. For use with water up to 65°C.
'DEF HDPE Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 65°C.
'DOKERLER HDPE fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Palconn EVOH PEX Pipe'. Extruded, multi-layered pipe consisting of a white coloured PEX inner, blue coloured EVOH middle layer and white coloured PEX outer. For use with water up to 85°C.
‘Polytank’. Multi-layered LLDPE tank panel, manufactured by rotational moulding, consisting of a white coloured inner layer, black coloured middle layer & white coloured outer layer. For use with water up to 65°C.
'ecoFIT'. Black coloured, extruded polyethylene pipe. For use with water up to 23°C.
'VIALLI-De PEXa Pipe'. Off-white coloured, extruded PEX pipe. For use with water up to 85°C.
'Union Pipes Industry Fabricated Fittings'. Black coloured, extruded and welded, fabricated polytheylene fittings. For use with water up to 60°C.
'Kalson Polyethylene Pipe'. Blue coloured, extruded polyethylene pipe. For use with water up to 50°C.
'Almona PE Electrofusion Fitting'. Black coloured, injection moulded polyethylene electrofusion fitting. For use with water up to 85°C.
'UPI Injection Molded Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'National Polyethylene Company LLDPE Tank Panel'. Multi-layered tank panel, manufactured by rotational moulding, comprising of a white coloured inner layer, white coloured second layer, black coloured third layer and white coloured outer layer. For use with water up to 23°C.
'ELYDAN'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 40°C.
'Brothers HDPE Electrofusion Fittings'. Black coloured, injection moulded, HDPE electrofusion fittings. For use with water up to 85°C.
'+GF+ Hakan HDPE PE100 Pipes'. Extruded PE100 pipes which are either blue coloured or black coloured (with blue stripes). For use with water up to 23°C.
'BR-PE-100 Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 60°C.
'DELAV HDPE Pipe PE100' and 'DELAV HDPE Pipe PE100-RC'. Black coloured (with blue stripes), extruded PE pipes. For use with water up to 23°C.
'STAR Spigot Fittings'. Black coloured, extruded PE100 fitting. For use with water up to 60°C.
'GY-PEX-b(60-95)'. White coloured (translucent), extruded PEX hose. For use with water up to 85°C.
'Uponor Aqua Pipe'. Extruded, multi-layered PE-X pipe comprising of an off-white inner layer, black middle layer and white outer layer. For use with water up to 70°C.
'Sudarshan HDPE Pipes'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 85°C.
'Sudarshan Fittings'. Black coloured, PE fittings made by injection moulding and CNC. For use with water up to 85°C.
'Protectaline Barrier Pipe'. Extruded, multi-layered pipe comprising of a black coloured PE inner layer, aluminium middle layer and blue coloured (with black stripe) PE outer layer. For use with water up to 23°C.
'GPS Excel Black PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'Hydrothen PE 100 Black Pipe'. Black coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Hydrothene (blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Fasopex Pipe'. Black coloured, extruded PE-X pipe. For use with water up to 85°C.
'WIN Spigot Fittings'. Black coloured, injection moulded PE100 spigot fittings. For use with water up to 60°C.
'GPS EXCEL NB Pipe'. Dual layered, extruded pipe consisting of a black coloured, PE100 inner layer and blue coloured, PE100 outer layer. For use with water up to 23°C.
'+GF+ HDPE PE 100' (black and black with blue stripes)'. Extruded polyethylene pipes. For use with water up to 60°C.
'Kaizen Electrofusion Saddle'. Blue coloured, injection moulded. HDPE electrofusion saddle fitting. For use with water up to 23°C.
'Wirsbo inPEX'. White coloured (translucent), extruded polyethylene pipe. For use with water up to 85°C.
'Baishi HDPE Fittings'. Injection moulded HDPE fittings available in black or blue colours. For use with water up to 65°C.
'UPMC HDPE Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 60°C.
'CP Polytec PE80E Blue Pipe'. Blue coloured, extruded PE pipe. For use with water up to 23°C.
'Tahwelya HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'EFIELD, PE-Xb/AL/PE-Xb pipe'. Extruded, multi-layered pipe comprising of a white coloured PE-Xb inner layer, aluminium middle layer and white coloured (opaque) PE-Xb outer layer. For use with water up to 85°C.
'SAFE 10 (H10 + H09, H17 + H04 and N08 + N04)' pipes. Extruded, dual-layered PE pipes comprising of a black coloured inner layer and blue coloured outer layer. Please note that the codes in brackets denote the raw material combinations and only these combinations are approved. In April 2025 ‘H10, H17 & N08’, extruded, single-layered, black coloured PE pipes were added to the approval. Only pipes marked with ‘H10, H17 or N08’ are approved. For use with water up to 40°C.
'EP EGEPLAST PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'CIPHON HDPE PIPE PE100'. Black coloured (with blue stripe), extruded PE100 pipe. For use with water up to 65°C.
'OCTATHERM PE-RT Pipe'. Black coloured, extruded PE-RT pipe. For use with water up to 85°C.
'Diamant, Carat XL/XXL, Platin, Platin XL/XXL, Spring Water Shaft & Space-Saving Tank’ panels. White coloured (opaque), roto-moulded PE panels The approval includes panels manufactured in Germany (from September 2024 onwards) and France (from December 2024 onwards). For use with water up to 23°C.
'PE 7144 Plastic Sleeve'. Natural (appears white), injection moulded polyethylene component. For use with water up to 85°C.
'Aquapipe'. Black coloured, extruded HDPE (PE100) pipe. For use with water up to 23°C.
'Thermopex'. White coloured (with red stripe), extruded PEX pipe. For use with water up to 85°C.
'GPS F Black Pipe'. Black coloured, extruded PE80 pipe. For use with water up to 23°C.
'GPS K Blue PE80 pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'GPS CRP100 Black Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'GPS N Blue PE80 Pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'ROMAPEX (Pipe PE-Xb EVOH 5L)'. Extruded, multi-layered pipe comprising of a white coloured PE-Xb inner layer, black coloured EVOH layer and white coloured PE-Xb outer layer. For use with water up to 85°C.
'JXPE100'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'Donghailong PE Tank Panel'. White coloured, polyethylene panel manufactured by blow moulding. For use with water up to 23°C.
'Wavin PE-RT Pipe'. Extruded, off-white coloured (opaque) PE-RT pipe. For use with water up to 65°C.
'ELBOR Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 65°C.
'SAS HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipes. For use with water up to 85°C.
'CL HDPE Pipe'. Black coloured, extruded HDPE pipes. For use with water up to 23°C.
'CL HDPE Fitting EF'. Black coloured, injection moulded, HDPE electrofusion fittings. For use with water up to 23°C.
'Cosmoplast PEX-b Pipe'. White coloured, extruded PEX-b pipe. For use with water up to 85°C.
'DAVANT'. Extruded, multi-layered pipe comprising of a white coloured PE-Xb inner layer, black coloured EVOH layer and white coloured PE-Xb outer layer. For use with water up to 85°C.
'SUDA HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Draka Comteq Cable Sheath: R607581 and R698927. Black coloured, extruded polyethylene cable sheath. For use with water up to 85°C.
‘Georg Fischer (+GF+) HDPE PE100 Pipes and ‘Hepworth MDPE PE80 Pipes’. Black coloured (with or without blue stripes), extruded PE100 pipes. Black coloured, extruded PE80 pipes. For use with water up to 60°C.
'HEPWORTH Pipe'. Black coloured, extruded LDPE pipe. For use with water up to 60°C.
'Hepworth MDPE PE 80 Black Pipe'. Black coloured (with blue external stripes), extruded MDPE pipe. For use with water up to 60°C.
'Polyfab PE100 Pipe' (manufactured by Polyfab Plastic Industry LLC in Ajman & Kizad). Black coloured (with blue external stripes), extruded PE100 pipe. For use with water up to 85°C.
'Polyfab PE100 Fittings' (manufactured by Polyfab Plastic Industry LLC in Ajman & Kizad). Black coloured, injection moulded PE100 fittings. For use with water up to 85°C.
'Plast Butt Fusion Fittings'. Black coloured, injection moulded HDPE butt fusion fittings. For use with water up to 85°C.
+GF+ MDPE PE 80 Black Pipe'. Black coloured (with blue external stripes), extruded MDPE pipe. For use with water up to 60°C.
‘+GF+ HDPE PE100 Pipes' and '+GF+ MDPE PE80 Pipes’. Black coloured (with or without blue stripes), extruded PE100 pipes. Black coloured, extruded PE80 pipes. For use with water up to 60°C.
'+GF+'. Black coloured, extruded LDPE pipe. For use with water up to 60°C.
'PF HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'ELGEF PLUS'. Black coloured, injection moulded HDPE electrofusion and spigot fittings. For use with water up to 60°C.
'CR-01 PE Pipe'. Blue coloured, extruded PE pipe. For use with water up to 23°C.
'CR-02 PE Fitting'. Blue coloured, injection moulded PE fitting. For use with water up to 23°C.
'FLEXIPOL MASA'. Black coloured (with blue stripes), extruded polyethylene pipes. For use with water up to 60°C. The 'FLEXIPOL MASA' pipes covered by the scope of this approval are marked with 'V63'. 'FLEXIPOL MASA' pipes which are not marked with 'V63' are not covered by the scope of this approval.
'Kasta® HDPE PE 100 Pipe (Black)'. Black coloured (with blue external stripes), extruded HDPE pipe. For use with water up to 65°C.
'Egelen PE100 & Egeplast 9010 pipes'. Egelen PE100 is a single layered, black coloured, extruded PE100 pipe. Egeplast 9010 is a dual layered, extruded PE100 pipe consisting of a black coloured inner layer and a blue coloured outer layer. For use with water up to 23°C.
'PE-B-01 Inlet Pipe'. Blue coloured, injection moulded Polyethylene pipe. For use with water up to 85°C.
'PE-R-02 Outlet Pipe'. Red coloured, injection moulded Polyethylene pipe. For use with water up to 85°C.
'PE-R-01 Thermocouple Protection Tube'. Red coloured, injection moulded Polyethylene tube. For use with water up to 85°C.
'Seiger PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'Omanplast HDPE Pipe'. Black coloured (with blue external stripes), extruded HDPE pipe (manufactured in Muna Noor Manufacturing & Trading LLC, Sohar & Muna Noor Manufacturing & Trading LLC, Rusayl, Oman). For use with water up to 60°C.
'Ori-Plast Electro-Fusion Fittings'. Black coloured, injection moulded PE 100 Electro-Fusion Fittings. For use with water up to 65°C.
'MISURATA Polyethylene Pipe'. Black coloured (with blue stripe), extruded Polyethylene pipe. For use with water up to 23°C.
'Polycon 3 Layer Standard Water Tank Panel' and 'Polycon 4 Layer Insulated Water Tank Panel'. LLDPE tank panels made by roto-moulding. The 3 layered panel has a white coloured (opaque) inner layer, black coloured (opaque) middle layer and white coloured (opaque) outer layer. The 4 layered panel has a white coloured (opaque) inner layer, black coloured (opaque) second layer, off-white coloured (opaque) third layer and white coloured (opaque) outer layer. Both panels are for use with water up to 85°C.
'AMIANTIT HDPE Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 50°C. Please note that only pipes marked with 'HE3490' are covered by the scope of the approval.
'SCGC HDPE H112PC'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
'CL HDPE Buttfusion Fittings'. Black coloured, injection moulded HDPE Buttfusion Fittings. For use with water up to 23°C.
'ANTON HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 80°C.
'Shield HDPE-100 Pipe' (extruded) and 'Shield HDPE-100 Fabricated Pipe' (extruded then fabricated). Black coloured, HDPE pipes. For use with water up to 85°C.
'Shield HDPE-100 Moulded Fittings'. Black coloured, injection moulded HDPE fitting. For use with water up to 85°C.
'Yildiz Polietilen Electrofusion and Spigot Fittings'. Black coloured, injection moulded HDPE Electrofusion and Spigot fittings. For use with water up to 60°C.
'TEGA PE100-RC Blue fitting'. Blue coloured, injection moulded HDPE fitting. For use with water up to 85°C.
'THERMOTECH HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'Techniplast PE100 Pipes'. Black coloured (with blue stripe), extruded PE100 pipes. For use with water up to 60°C.
'TW03'. White coloured (translucent), injection moulded polyethylene thrust washer. For use with water up to 85°C.
'Hydropriv PE80 Pipe'. Black coloured (with blue external stripes) and blue coloured, extruded PE80 pipe. For use with water up to 23°C.
'T-MECH PE-Xb Pipe’. White coloured (opaque), extruded PEX pipe. For use with water up to 85°C.
'PE002'. Blue coloured, HDPE fitting manufactured by mould pressing. For use with water up to 60°C.
'Solerad PERT/AL/PERT Pipe'. Extruded, multi-layered pipe comprising of an off-white PERT inner layer, Aluminium middle layer and white PERT outer layer. For use with water up to 85°C.
'PIPELIFE - ARILI HDPE PE100 Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 23°C.
'MLTR PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (clear) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'FILPEX PE-Xb Pipes'. Extruded, PE-Xb pipes available in brown, blue and white (with blue stripe) colours. For use with water up to 85°C.
'Rifeng PEX/AL/PEX Pipe'. Triple layered, extruded pipe consisting of an off-white coloured PEX inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'Rifeng PEX Pipe'. Off-white coloured, extruded PEX pipe. For use with water up to 85°C.
'Bingo HDPE Pipes 01'. Black coloured (with blue, external stripes), extruded HDPE pipe. For use with water up to 85°C.
'Bingo HDPE Fittings 02'. Black coloured, injection moulded HDPE fittings. For use with water up to 85°C.
'Hotace HDPE Black Pipe'. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 80°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
