Valves

Section Code 2345 : Special combination assemblies.

Back To Directory Sections

#2103323

5 way manifold assembly with a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range between 1.0 and 6.0 bar and a safety relief valve set at 6.0 bar. The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 40°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2103323
Size:
22mm compression.
Marking:
Caleffi and DN on pressure relief valve nut. Flow arrow and CR mark on pressure relief valve. Caleffi logo, CR, pressure rating and flow arrow on safety relief valve cap.
Installation Requirements:
R001 R120
Expiry date:
31/03/2026
Model:
UV3 kit.

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2106036

Range of cold-water inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (PRV) (adjustable in the range of 0.8 bar - 6.0 bar, but factory pre-set at 3.0 or 3.5 bar - see model), strainer and a DZR brass bodied pressure relief valve (SRV) (set at 4.75 bar or 6.0 bar - see model). Products also incorporate an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2106036
Size:
22mm compression
Marking:
RBM on cap. CR, size and flow arrow on body.
Installation Requirements:
R001 R120
Expiry date:
30/06/2026
Model:
UVGS21822200.1 - 22mm INLET 3 BAR PRV, 4.75 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822210.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UGVS21822211 - 22mm INLET 3.5 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822220.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 22mm EXPANSION VESSEL CONNECTION. UVGS21822260.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET NO VESSEL CONNECTION.

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#2110307

Range of 5 way inlet control group assemblies with a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range between 2.7 and 3.3bar and a safety relief valve set at 8.0 bar. The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2) and strainer on the inlet Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110307
Size:
22mm compression.
Marking:
Caleffi, Caleffi logo, size, CR and flow arrow on body
Installation Requirements:
R001 R120
Expiry date:
31/10/2026
Model:
H0003723 H0008504
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2110005

Range of cold water inlet control groups with DZR brass bodies, consisting of a pressure reducing valve, (all models are adjustable between 1.0 and 6.0 bar, but some come pre-set from the factory - see model), a pressure relief valve (set at 6.0 or 8.0 bar - see model) and a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. All products for use with copper pipe manufactured to BS EN 1057. Maximum inlet supply pressure 20.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110005
Size:
28mm compression inlet/outlet
Marking:
RWC, SYR, DR and flow arrow on body. RELIANCE WATER CONTROLS and pressure on cap.
Installation Requirements:
R001 R120
Expiry date:
31/10/2026
Model:
CWIC352300, CWIC352301, CWIC352302, CWIC352306, CWIC352310 CWIC352300 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352301 (pressure reducing valve pre-set at 1.0 bar, pressure relief valve is set at 6.0 bar). CWIC352302 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 6.0 bar). CWIC352303 (pressure reducing valve pre-set at 3.5 bar, pressure relief valve is set at 8.0 bar). CWIC352306 (pressure reducing valve pre-set at 2.1 bar, pressure relief valve is set at 8.0 bar). CWIC352310 (pressure reducing valve is adjustable between 1.0 & 6.0 bar, pressure relief valve set at 8 bar).
Product Images

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2111316

Range of inlet control groups with DZR brass bodies incorporating an in-line, adjustable, pressure reducing valve (PRV) (adjustable range ±10% of the factory pre-set value - see model), and a pressure relief valve (SRV) (set at 3.0 bar, 4.5 bar or 6.0 bar - see model). The product incorporates a single check valve cartridge, after the pressure reducing valve, verified by test (suitable for backflow protection against Fluid Category 2). The product also incorporates an approved check valve cartridge on the angled cold water take off point, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 10.0 bar. Cold water use only.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2111316
Size:
22mm compression
Marking:
Caleffi name or logo, CR, flow arrow and date of manufacture (WK/YR) on body.
Installation Requirements:
R001 R120
Expiry date:
30/11/2026
Model:
535000 (PRV 3.0 bar/SRV 6.0 bar), 535003 (PRV 2.0 bar/SRV 6.0 bar), 535001 (PRV 3.0 bar/SRV 6.0 bar), 535002 (PRV 2.2 bar/SRV 6.0 bar), 535010 (PRV 2.2 bar/SRV 4.5 bar), 535011 (PRV 2.0 bar/SRV 3.0 bar).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.