Range of end feed copper fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011038

Size:

Please refer to model.

Marking:

◊ A ◊ (Masterflow logo) and 'SIZE' on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Masterflow soldered endfeed: Straight Coupler 8mm to 54mm. Reduced Coupler 8mm to 54mm. Fitting Reducer 8mm to 54mm. Fitting Reduce (Long) 8mm to 15mm. Imperial/Metric Coupler 1/2”x15mm.3/4”x22mm.1”x28mm. Slip Coupler 15mm to 28mm. C x Fl Straight Coupler 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”, 28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. Cx Ml Straight Coupler 15mm x 1/4”,15mm x 1/2”,22mm x 1/2”, 22mm x 3/4”,28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. C x Fl 15mm x 1/2”,22mm x 3/4.” C x Ml Elbow 15mm x 1/2”,22mm x 3/4”. 90 deg Elbow 8mm to 54mm. 90 deg Street Elbow 10mm to 54mm. Obtuse Street Elbow 15mm to 54mm. End Feed Long Radius Street Elbow 15mm x 54mm. 45 deg Obtuse Elbow 15mm to 54mm. Wallplate Elbow 15mm x 1/2”. Part Crossover 15mm to 22mm. Full Crossover 15mm to 22mm. Equal Tee 10mm to 54mm. Reduced Branch Tee 10mm to 54mm. Reduced End Tee 15mm to 54mm. Reduced End & Branch Tee 15mm to 54mm. Both Ends Reduced Tee 15mm x 28mm. Extended Street Elbow 15mm x 150mm. Fl Tee (Fl On Run) 15mm x 1/2” x 15mm, 22mm x 1/2” x 22mm. Fl Tee (On Run) 15 x 15 x 1/2”,22 x22 x 1/2”,22 x 22 x 3/4”. Stop End 8mm to 54mm. Straight Tap Connector 15mm x 1/2”,15mm x 3/4”, 22mm x 3/4”. Bent Cap Connector 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”. Bent Union Adaptor 22mm x 1”. Straight Union Adaptor 22mm x 3/4”,22mm x 1”,28mm x 1”. Air Vent Cap 15mm and 22mm. U Bend 15mm.

Product Images

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company

End Feed Range copper fittings for use with copper tube. For above and below ground use Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011053

Size:

8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm & 54mm.

Marking:

Linhai Hengye Tubing logo (IOJ) and size on body.

Installation Requirements:

R0001

Expiry date:

30/11/2025

Model:

5090 (Elbows), 5270 (Couplings) & 5130 (Tees).

Product Images

Approval Holder:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101805

Size:

SEE MODEL

Marking:

6mm & 8mm = JT (brand logo) and size on body. All other sizes = JT (brand logo) on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupler: EFC-08: 8mm. EFC-10: 10mm. EFC-12: 12mm. EFC-15: 15mm. EFC-L-15: 15mm. EFC-18: 18mm. EFC-22: 22mm. EFC-L-22: 22mm. EFC-28: 28mm. EFC-L-28: 28mm. EFC-35: 35mm. EFC-42: 42mm. EFC-54: 54mm. EFC-67: 67mm. EFC-76: 76mm. EFC-108: 108mm. EFC-133: 133mm. EFC-159: 159mm. Slip Coupler: EFCS-15: 15mm. EFCS-18: 18mm. EFCS-22: 22mm. EFCS-28: 28mm. EFCS-35: 35mm. EFCS-42: 42mm. EFCS-54: 54mm. EFCS-67: 67mm. EFCS-76: 76mm. EFCS-108: 108mm. EFCS-133: 133mm. EFCS-159: 159mm. Reducing Coupler: EFRC-1008: 10-08mm. EFRC-1508: 15-08mm. EFRC-1510: 15-10mm. EFRC-1512: 15-12mm. EFRC-2215: 22-15mm. EFRC-L- 2215: 22-15mm. EFRC-2815: 28-15mm. EFRC-L- 2815: 28-15mm. EFRC-2822: 28-22mm. EFRC-3515: 35-15mm. EFRC-3522: 35-22mm. EFRC-3528: 35-28mm. EFRC-4215: 42-15mm. EFRC-4222: 42-22mm. EFRC-4228: 42-28mm. EFRC-4235: 42-35mm. EFRC-5415: 54-15mm. EFRC-5422: 54-22mm. EFRC-5428: 54-28mm. EFRC-5435: 54-35mm. EFRC-5442: 54-42mm. Fitting Reducer: EFFR-1008: 10-08mm. EFFR-1208: 12-08mm. EFFR-1210: 12-10mm. EFFR-1508: 15-08mm. EFFR-1510: 15-10mm. EFFR-1512: 15-12mm. EFFR-2215: 22-15mm. EFFR-L-2215: 22-15mm. EFFR-2815: 28-15mm. EFFR-2822: 28-22mm. EFFR-3515: 35-15mm. EFFR-3522: 35-22mm. EFFR-3528: 35-28mm. EFFR-4215: 42-15mm. EFFR-4222: 42-22mm. EFFR-4228: 42-28mm. EFFR-4235: 42-35mm. EFFR-5415: 54-15mm. EFFR-5422: 54-22mm. EFFR-5428: 54-28mm. EFFR-5435: 54-35mm. EFFR-5442: 54-42mm. EFFR-6715: 67-15mm. EFFR-6722: 67-22mm. EFFR-6728: 67-28mm. EFFR-6735: 67-35mm. EFFR-6742: 67-42mm. EFFR-6754: 67-54mm. EFFR-7628: 76-28mm. EFFR-7635: 76-35mm. EFFR-7642: 76-42mm. EFFR-7654: 76-54mm. EFFR-7667: 76-67mm. EFFR-10835: 108-35mm. EFFR-10842: 108-42mm. EFFR-10854: 108-54mm. EFFR-10867: 108-67mm. EFFR-10876: 108-76mm. Long Fitting Reducer with long tail: EFFRL-1508: 15-08mm. EFFRL-1510: 15-10mm. 90° Long Street Elbow: EFESL-12: 12 mm. EFESL-15: 15 mm. EFESL-18: 18mm. EFESL-22: 22 mm. EFESL-28: 28mm. EFESL-35: 35mm. EFESL-42: 42mm. EFESL-54: 54mm. EFESL-67: 67mm. EFESL-76: 76mm. EFESL-108: 108mm. EFESL-133: 133mm. EFESL-159: 159mm. 90° Long Elbow: EFE-L-12: 12 mm. EFE-L-15: 15 mm. EFE-L-18: 18mm. EFE-L-22: 22 mm. EFE-L-28: 28mm. EFE-L-35: 35mm. EFE-L-42: 42mm. EFE-L-54: 54mm. EFE-L-67: 67mm. EFE-L-76: 76mm. EFE-L-108: 108mm. EFE-L-133: 133mm. EFE-L-159: 159mm. 90° Elbow: EFE-06: 6mm. EFE-08: 8mm. EFE-10: 10mm. EFE-15: 15mm. EFE-L-15: 15mm. EFE-18: 18mm. EFE-22: 22mm. EFE-L-22: 22mm. EFE-28: 28mm. EFE-L-28: 28mm. EFE-35: 35mm. EFE-42: 42mm. EFE-54: 54mm. EFE-67: 67mm. EFE-76: 76mm. EFE-108: 108mm. EFE-133: 133mm. EFE-159: 159mm. 45° Elbow: EFE/45-8: 8mm. EFE/45-10: 10mm. EFE/45-15: 15mm. EFE-L/45-15: 15mm. EFE/45-18: 18mm. EFE/45-22: 22mm. EFE-L/45-22: 22mm. EFE/45-28: 28mm. EFE-L/45-28: 28mm. EFE/45-35: 35mm. EFE/45-42: 42mm. EFE/45-54: 54mm. EFE/45-67: 67mm. EFE/45-76: 76mm. EFE/45-108: 108mm. EFE/45-159: 159mm. 90° Street Elbow: EFES-8: 8mm. EFES-10: 10 mm. EFES-15: 15mm. EFES-L-15: 15mm. EFES-18: 18mm. EFES-22: 22mm. EFES-L-22: 22mm. EFES-28: 28mm. EFES-L-28: 28mm. EFES-35: 35mm. EFES-42: 42mm. EFES-54: 54mm. EFES-67: 67mm. EFES-76: 76mm. EFES-108: 108mm. EFES-133: 133mm. EFES-159: 159mm. 45° Street Elbow: EFES/45-8: 8mm. EFES/45-10: 10 mm. EFES/45-15: 15mm. EFES/45-18: 18mm. EFES/45-22: 22mm. EFES/45-28: 28mm. EFES/45-35: 35mm. EFES/45-42: 42mm. EFES/45-54: 54mm. EFES/45-133: 133mm. EFES/45-159: 159mm. Equal Tee: EFET-06: 6mm. EFET-08: 8mm. EFET-10: 10mm. EFET-12: 12mm. EFET-15: 15mm. EFET-L-15: 15mm. EFET-18: 18mm. EFET-22: 22mm. EFET-L-22: 22mm. EFET-28: 28mm. EFET-L-28: 28mm. EFET-35: 35mm. EFET-42: 42mm. EFET-54: 54mm. EFET-67: 67mm. EFET-76: 76mm. EFET-108: 108mm. EFET-133: 133mm. EFET-159: 159mm. Reducing Tee: EFRT-101015: 10x10x15mm. EFRT-151010: 15x10x10mm. EFRT-151015: 15x10x15mm. EFRT-151508: 15x15x08mm. EFRT-151510: 15x15x10mm. EFRT-151512: 15x15x12mm. EFRT-151522: 15x15x22mm. EFRT-221515: 22x15x15mm. EFRT-221522: 22x15x22mm. EFRT-L-221522: 22x15x22mm. EFRT-222210: 22x22x10mm. EFRT-222215: 22x22x15mm. EFRT-L-222215: 22x22x15mm. EFRT-222228: 22x22x28mm. EFRT-281515: 28x15x15mm. EFRT-281522: 28x15x22mm. EFRT-281528: 28x15x28mm. EFRT-282215: 28x22x15mm. EFRT-282222: 28x22x22mm. EFRT-282228: 28x22x28mm. EFRT-282815: 28x28x15mm. EFRT-282822: 28x28x22mm. EFRT-282835: 28x28x35mm. EFRT-352222: 35x22x22mm. EFRT-352235: 35x22x35mm. EFRT-352822: 35x28x22mm. EFRT-352828: 35x28x28mm. EFRT-352835: 35x28x35mm. EFRT-353515: 35x35x15mm. EFRT-353522: 35x35x22mm. EFRT-353528: 35x35x28mm. EFRT-422828: 42x28x28mm. EFRT-422842: 42x28x42mm. EFRT-423535: 42x35x35mm. EFRT-423542: 42x35x42mm. EFRT-424215: 42x42x15mm. EFRT-424222: 42x42x22mm. EFRT-424228: 42x42x28mm. EFRT-424235: 42x42x35mm. EFRT-544254: 54x42x54mm. EFRT-545415: 54x54x15mm. EFRT-545422: 54x54x22mm. EFRT-545428: 54x54x28mm. EFRT-545435: 54x54x35mm. EFRT-545442: 54x54x42mm. EFRT-675467: 67x54x67mm. EFRT-676728: 67x67x28mm. EFRT-676735: 67x67x35mm. EFRT-676742: 67x67x42mm. EFRT-676754: 67x67x54mm. EFRT-767628: 76x76x28mm. EFRT-767635: 76x76x35mm. EFRT-767642: 76x76x42mm. EFRT-767654: 76x76x54mm. EFRT-767667: 76x76x67mm. EFRT-10810854: 108x108x54mm. EFRT-10810867: 108x108x67mm. EFRT-10810876: 108x108x76mm. EFRT-13313354: 133x133x54mm. EFRT-133133108: 133x133x108mm. EFRT-15915954: 159x159x54mm. EFRT-159159133: 159x159x133mm. Full crossover: EFFCO-10: 10 mm. EFFCO-12: 12 mm. EFFCO-15: 15 mm. EFFCO-18: 18mm. EFFCO-22: 22 mm. EFFCO-28: 28mm. Partial Crossover: EFPCO-10: 10mm. EFPCO-15: 15mm. EFPCO-18: 18mm. EFPCO-22: 22mm. End cap: EFEC-08: 8mm. EFEC-10: 10mm. EFEC-15: 15mm. EFEC-18: 18mm. EFEC-22: 22mm. EFEC-28: 28mm. EFEC-35: 35mm. EFEC-42: 42mm. EFEC-54: 54mm. EFEC-67: 67mm. EFEC-76: 76mm. EFEC-108: 108mm. EFEC-133: 133mm. EFEC-159: 159mm. Imp coupler: EFCOI-15: 15mm x 1/2”. EFCOI-15: 15mm x 3/4”. EFCOI-22: 22mm x 3/4”. EFCOI-28: 28mm x 1”. EFCOI-35: 35mm x 1 1/4”. EFCOI-42: 42mm x 1 1/2”. EFCOI-54: 54mm x 1 3/4”. EFCOI-67: 67mm x 2”. EFCOI-76: 76mm x 3”. EFCOI-108: 108mm x 4”. Male Adapter: EFMA-15 1/4: 15mm x 1/4”. EFMA-15 3/8: 15mm x 3/8”. EFMA-15 2/1: 15mm x 1/2”. EFMA-15 3/4: 15mm x 3/4”. EFMA-22 3/4: 22mm x 3/4”. EFMA-22 1: 22mm x 1”. EFMA-28 1: 28mm x 1”. EFMA-35 1 1/4: 35mm x 1 1/4”. EFMA-42 1 1/2: 42mm x 1 1/2”. EFMA-54 2: 54mm x 2”. EFMA-67 2 1/2: 67mm x 2 1/2”. EFMA-76 3: 76mm x 3”. Female Adapter: EFFA-15 1/4: 15mm x 1/4”. EFFA-15 3/8: 15mm x 3/8”. EFFA-15 1/2: 15mm x 1/2”. EFFA-22 3/4: 22mm x 3/4”. EFFA-28 1: 28mm x 1”. EFFA-35 1 1/4: 35mm x 1 1/4”. EFFA-42 1 1/2: 42mm x 1 1/2”. EFFA-54 2: 54mm x 2”. Straight Tap connector: EFSTC-15 1/2: 15mm x 1/2”. EFSTC-15 3/4: 15mm x 3/4”. EFSTC-22 3/4: 22mm x 3/4”. EFSTC-28 1: 28mm x 1”. EFSTC-22 1: 22mm x 1”. Bent tap connector: EFBTC-15 1/2: 15mm x 1/2”. EFBTC-15 3/4: 15mm x 3/4”. EFBTC-22 3/4: 22mm x 3/4”. EFBTC-28 1: 28mm. x1”. EFBTC-22 1: 22mm x 1”. Straight Tap connector (With Gasket): EFSCU-15 1/2: 15mm x 1/2”. EFSCU-15 3/4: 15mm x 3/4”. EFSCU-22 3/4: 22mm x 3/4”. EFSCU-22 1: 22mm x 1”. EFSCU-28 1: 28mm x 1”. Bent tap connector (with Gasket): EFBCU-15 1/2: 15mm x 1/2”. EFBCU-15 3/4: 15mm x 3/4”. EFBCU-22 3/4: 22mm x 3/4”. EFBCU-22 1: 22mm x 1”. EFBCU-28 1: 28mm x 1”. Straight cylinder union: EFSCC-151/2: 15mm x 1/2”. EFSCC-153/4: 15mm x 3/4”. EFSCC-223/4: 22mm x 3/4”. EFSCC-221: 22mm x 1”. EFSCC-281: 28mm x 1”. Models added April 2021: Fitting Reducer: EFFR-L-1510, 15-10mm EFFR-L-2822, 28-22mm 45° Elbow: EFE/45-133, 133mm End cap: EFEC-L-15, 15mm EFEC-L-22, 22mm

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of brass and copper fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 18.6 bar. Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011341

Size:

See model

Marking:

Endex Logo or Endbraze on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

N1 Straight Coupling: 88030 - 67mm 89600 - 76mm 89601 - 108mm 89697 - 133mm 89698 - 159mm B12 Elbow: 88456 – 67mm 89619 – 76mm N61 Stop End: 89090 – 67mm 89694 – 76mm 89695 – 108mm N69P Straight Male Union Connector: 89253 – 67mm N1IM Met x Imp Adaptor Coupling: 89617 – 76mm x 3” 89618 – 108mm x 4” N18 Slow Bend: 89639 – 67mm 89640 – 76mm 89741 – 108mm 89709 – 133mm 89710 – 159mm N1FMGI Bi-Metal Flange: 88028 – 42mm (4 holes) 88029 – 54mm (4 holes) 88114 – 67mm (4 holes) 89603 – 76mm (8 holes) 89604 – 108mm (8 holes) 89602 – 133mm (8 holes) 89719 – 159mm (8 holes) N3 Straight Male Connector: 88200 – 67mm x 2 ½” 89615 – 76mm x 3” 89616 – 108mm x 4” N21 Obtuse Elbow: 88653 – 67mm 89645 – 76mm 89646 – 108mm 89711 – 133mm 89712 – 159mm N1FMB Gunmetal Flange: 89605 – 76mm (8 holes) N6 Reducer: 88310 – 67mm x 28mm 88311 – 67mm x 35mm 88312 – 67mm x 42mm 88313 – 67mm x 54mm 89624 – 76mm x 35mm 89625 – 76mm x 42mm 89626 – 76mm x 54mm 89627 – 76mm x 67mm 89630 – 108mm x 42mm 89631 – 108mm x 54mm 89632 – 108mm x 67mm 89633 – 108mm x 76mm 89699 – 133mm x 42mm 89700 – 133mm x 54mm 89701 – 133mm x 67mm 89702 – 133mm x 76mm 89703 – 133mm x 108mm 89704 – 159mm x 54mm 89705 – 159mm x 67mm 89706 – 159mm x 76mm 89707 – 159mm x 108mm 89708 – 159mm x 133mm N24 Equal Tee: 88719 – 67mm 89648 – 76mm 89649 – 108mm 89713 – 133mm 89714 – 159mm N25 Tee Reduced Branch: 88807 – 67mm x 67mm x 28mm 89055 – 67mm x 67mm x 35mm 89056 – 67mm x 67mm x 42mm 89057 – 67mm x 67mm x 54mm 89058 – 76mm x 76mm x 28mm 89000 – 76mm x 76mm x 35mm 89654 – 76mm x 76mm x 42mm 89001 – 76mm x 76mm x 54mm 89059 – 108mm x 108mm x 35mm 89660 – 108mm x 108mm x 54mm 89002 – 108mm x 108mm x 76mm 89715 – 133mm x 133mm x 54mm 89716 – 133mm x 133mm x 108mm 89717 – 159mm x 159mm x 54mm 89718 – 159mm x 159mm x133mm

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of capillary end feed bronze fittings for use with copper tube (manufactured to BS EN 1057). 15mm – 54mm fittings have a maximum working pressure of 25.0 bar. 67mm – 108mm fittings have a maximum working pressure of 16.0 bar. Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105306

Note:

Above ground use only.

Size:

15mm – 108mm.

Marking:

Kembla & size on body.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

FEN – Female 90° Elbow 15mm x 1/2” code FEN015 22mm x 1/2” code FEN02215 22mm x 3/4" code FEN022 28mm x 1” code FEN028 MEN – Male 90° Elbow 15mm x 1/2" code MEN015 FTE – Female Tee 22mm x 1/2" code FTE02215 35mm x 3/4" code FTE03522 42mm x 3/4" code FTE04222 42mm x 1” code FTE04228 54mm x 3/4" code FTE05422 54mm x 1” code FTE05428 FCE – Female Cross Tee 35mm x 3/4" code FCE03522 42mm x 3/4" code FCE04222 42mm x 1” code FCE04228 54mm x 3/4” code FCE05422 54mm x 1” code FCE05428 FCC – Female Coupler 15mm x 1/2" code FCC015 22mm x 3/4” code FCC022 28mm x 1” code FCC028 35mm x 1-1/4” code FCC035 42mm x 1-1/2” code FCC042 54mm x 2” code FCC054 67mm x 2-1/2” code FCC067 BTR – Reducing Coupling 22mm x 1/2" code BTR022 MCC – Male Coupler 15mm x 1/2" code MCC015 22mm x 3/4” code MCC022 28mm x 1” code MCC028 35mm x 1-1/4” code MCC035 42mm x 1-1/2” code MCC042 54mm x 2” code MCC054 67mm x 2-1/2” code MCC067 76mm x 3” code MCC076 108mm x 4” code MCC108

Product Images

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company