Nylon

Section Code 5180 : Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#2004508

'KN133G30 (off-white in colour) & KN133G15BL (black coloured)'. Injection moulded PA6 materials. KN133G30 is for use with water up to 65°C. KN133G15BL is for use with water up to 23°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2004508
Expiry date:
30/04/2025
Approval Holder:
Kolon Plastics Inc.
Company Name
Kolon Plastics Inc.
Address
1018 Umgmyung - Dong, Gimcheon, Gyungsangbuk - Do
Country
Korea

View All Listings by this Company

Print This Approval

#2004518

'Plustek PB305G33BK37 (black)'. Black coloured, injection moulded, glass reinforced PA material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2004518
Expiry date:
30/04/2025
Approval Holder:
Polyram Ram-On Industries
Company Name
Polyram Ram-On Industries
Address
Ram-on 1920500, Israel
Phone
+972 6649 9555 Fax: +972 6649 9763

View All Listings by this Company

Print This Approval

#2006516

'Mapex AN4920SN FWB50'. Black coloured, injection moulded polyamide (with glass fibre) material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2006516
Expiry date:
30/06/2025
Approval Holder:
Ginar Technology Co. Ltd.
Company Name
Ginar Technology Co. Ltd.

View All Listings by this Company

Print This Approval

#2011506

'Ultramid S3EG6 Balance Aqua Uncoloured'. Uncoloured (appears beige), injection moulded PA6/10 material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2011506
Expiry date:
30/11/2025
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen
Country
Germany

View All Listings by this Company

Print This Approval

#2008526

'Plustek PA7001G7BK11'. Black coloured, injection moulded polyamide material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2008526
Expiry date:
31/08/2025
Approval Holder:
Polyram Ram-On Industries
Company Name
Polyram Ram-On Industries
Address
Ram-on 1920500, Israel
Phone
+972 6649 9555 Fax: +972 6649 9763

View All Listings by this Company

Print This Approval

#2012503

'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012503
Expiry date:
31/12/2025
Approval Holder:
EMS-CHEMIE AG
Company Name
EMS-CHEMIE AG
Address
Via Innovativa 1, CH-7013 Domat/Ems
Country
Switzerland
Phone
+41 81 632 78 78
General Email
welcome@emsgrivory.com

View All Listings by this Company

Print This Approval

#2010512

'TECHNYL ® SAFE A 219WFC V30 BK’ (black coloured) & ‘TECHNYL ® SAFE A 219WFC V30 NC’ (natural, appears off-white). Injection moulded, glass fibre reinforced polyamide 6.6 materials. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2010512
Expiry date:
31/10/2025
Approval Holder:
Polytechnyl S.A.S. Member of DOMO Chemicals
Company Name
Polytechnyl S.A.S. Member of DOMO Chemicals

View All Listings by this Company

Print This Approval

#2010544

'RADILON® DT RV300RKC2 106 NT to RADILON® DT RV500RKC2 106 NT and RADILON® DT RV300RKC2 306 BK to RADILON® DT RV500RKC2 306 BK'. Natural (appears off-white in colour) or black, injection moulded glass fibre filled PA6.12 materials. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2010544
Expiry date:
31/10/2025
Approval Holder:
Radici Novacips SpA
Company Name
Radici Novacips SpA
Country
Italy

View All Listings by this Company

Print This Approval

#2012504

‘TECHNYL ® SAFE D 219WFC V30 BK’ & ‘TECHNYL ® SAFE D 219WFC V50 BK’. Black coloured, injection moulded, glass fibre reinforced polyamide 6.10 materials. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2012504
Expiry date:
31/12/2025
Approval Holder:
Polytechnyl S.A.S. Member of DOMO Chemicals
Company Name
Polytechnyl S.A.S. Member of DOMO Chemicals

View All Listings by this Company

Print This Approval

#2007527

'Taromid A 260 HW GS10 Black & Taromid A 260 HW GS10 Blue'. Black or blue coloured, injection moulded PA66 materials. For use with water up to 23°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2007527
Expiry date:
31/07/2025
Approval Holder:
Taro Plast Spa.
Company Name
Taro Plast Spa.

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 14

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.