‘Safecure Super’. White coloured, spray applied SBR latex solution intended to act as a concrete curing membrane. Apply as per manufacturer`s 'Tech Data Sheet no. 306', 'Revision no. v4', dated '02.01.2026'. Cure for 14 days at 25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5057 Concrete, Cement and Mortar

Section Subtitle:

Curing compounds.

WRAS Approval Number:

260155016

Expiry date:

31/01/2031

Approval Holder:

Adomast Manufacturing Ltd.

Company Name

Adomast Manufacturing Ltd.

Address

Units 1 & 2 Barkston Road, Carlton Industrial Estate, Barnsley

Postcode

S71 3HU

View All Listings by this Company

'PT-100' Grease. White coloured (opaque), non-miscible grease. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

30/11/2030

Approval Holder:

Guangdong Zhuoyue New Materials Technology Co., Ltd.

Company Name

Guangdong Zhuoyue New Materials Technology Co., Ltd.

Address

Building 12, Gonghe Industrial Park, Heshan, Guangdong Materials Valley, Jiangmen City, Guangdong Province

Country

China

View All Listings by this Company

'MACONSIL 2312 E'. White coloured (opaque) silicone-based lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/12/2030

Approval Holder:

MACON RESEARCH S.R.L.

Company Name

MACON RESEARCH S.R.L.

Address

Via San Pietro 56, 36056 - Tezze sul Brenta (VI)

Country

Italy

View All Listings by this Company

'Durethan BKV30F 901510 SR1'. Black coloured, injection moulded nylon material. For use with water up to 65°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

260455004

Expiry date:

30/04/2031

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

'Grilamid TR ICR 12 LS natural' (appears white, transparent), 'Grilamid TR ICR 12 LS yellow 6908' (yellow coloured) and 'Grilamid TR ICR 12 LS blue 4271' (blue coloured). Injection moulded PA MACM12/X materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251255039

Expiry date:

31/12/2030

Approval Holder:

EMS-CHEMIE AG

Company Name

EMS-CHEMIE AG

Address

Via Innovativa 1, CH-7013 Domat/Ems

Country

Switzerland

Phone

+41 81 632 78 78

General Email

welcome@emsgrivory.com

View All Listings by this Company

'Neproplast HDPE Fittings'. Black coloured, injection moulded HDPE (PE100) fittings. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251255031

Expiry date:

31/12/2030

Approval Holder:

New Products Industries Co. Ltd. (Neproplast)

Company Name

New Products Industries Co. Ltd. (Neproplast)

Address

PO Box 460, Jeddah 21411, Jeddah

Country

Saudi Arabia

View All Listings by this Company

'FIRAT HDPE 100 fittings'. Black coloured, injection moulded HDPE electrofusion fittings. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251255028

Expiry date:

31/12/2030

Approval Holder:

Firat Plastik Kauçuk San. Tic. A.S.

Company Name

Firat Plastik Kauçuk San. Tic. A.S.

Address

Türkoba Mah. Firat Plastik Cad. No: 23 Büyükçekmece, Istanbul 34537

Country

Turkey

View All Listings by this Company

'FIRAT HDPE 100 Pipe'. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251155062

Expiry date:

30/11/2030

Approval Holder:

Firat Plastik Kauçuk San. Tic. A.S.

Company Name

Firat Plastik Kauçuk San. Tic. A.S.

Address

Türkoba Mah. Firat Plastik Cad. No: 23 Büyükçekmece, Istanbul 34537

Country

Turkey

View All Listings by this Company

'Polyatlas PE100 Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251255042

Expiry date:

31/12/2030

Approval Holder:

Atlas Ltd. & Co. Lp.

Company Name

Atlas Ltd. & Co. Lp.

Address

11th Km Edessa - Thessaloniki, Mavrovouni Skydras, 58500

Country

Greece

View All Listings by this Company

Hostalen 4731B HDPE-HT. White coloured, extruded polyethylene material. For use with water up to 60°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251255027

Expiry date:

31/12/2030

Approval Holder:

Baker Hughes Flexible Pipe Systems

Company Name

Baker Hughes Flexible Pipe Systems

Address

Walker Riverside, 2 Wellstream House, Wincomblee Road, Newcastle Upon Tyne

Postcode

NE6 3PF

View All Listings by this Company