Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240655006

'AEC 2/EPDM-50, AEC 3/EPDM-60, AEC 4/EPDM-70 & AEC.A5/EPDM-80'. Black coloured, compression moulded EPDM materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 240655006
Expiry date:: 30/06/2029

Approval Holder:: Allianz Elastomer

Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

WRAS Approval Number: #240655015

'AquaFlex T 5821'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 240655015
Expiry date:: 30/06/2029

Approval Holder:: Compounds AG

Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

WRAS Approval Number: #240655005

'6741'. Brown coloured, compression moulded FKM material. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 85°C.

Section:: 5375 Rubbers
Section Subtitle:: Fluorocarbon - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 240655005
Expiry date:: 30/06/2029

Approval Holder:: Gulf Rubber Group - Tumedei SpA

Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #240604031

‘Wall mounted, electronically operated tap assemblies (brass bodies - in various finishes). The flow is controlled by a solenoid valve that is actuated via an infra-red sensor on the spout. The spout outlet incorporates plastic aerators. Maximum working pressure 6 bar. Maximum operating temperature 65°C.

Section:: 0684 Combination Tap Assemblies
Section Subtitle:: Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:: 240604031
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP(M)
Marking:: Dolphin logo on spout.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2029
Model:: DS101.bbb.d.ee DS102.bbb.d.ee DS103.bbb.d.ee DS104.bbb.d.ee ‘aaa’ denotes the style type, the following options are available: DS101 - 90° bent spout, DS102 - 90° bent spout with wall plate fixing kit, DS103 - 55° bent spout or DS104 - 55° bent spout with wall plate fixing kit. ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 107mm – 330mm. ‘d’ denotes the surface finish (which is a non-water contact part). It will always be 1 digit and either a letter or numbers. As examples: 1 = brushed satin stainless steel, 3 = PVD coated brushed satin stainless steel. ‘ee’ denotes the surface colour (which is a non-water contact part) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish Models may include an additional ‘.R’ suffix which denotes that the tap is supplied without the rosette, or an additional ‘fff’ suffix to denote a non-standard size Rosette (which is a non-water contact part) It will always be 2-3 digits, which can be any combination of numbers and/or letters

Approval Holder:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company
Manufacturer:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #240602711

Range of spring loaded resilient trim check valve cartridges with plastic bodies, stainless steel spring and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 16 Bar Maximum operating temperature 65°C (model OV15/DN15-EPDM 31.0001.0 only) Maximum operating temperature 85°C for all other models

Section:: 0026 Backflow Prevention Devices
Section Subtitle:: Check Valve Cartridge(s) The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:: 240602711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Neoperl, size, flow arrow and WRAS on body Note: flow arrow is not on model 31.0022.0
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: OF15/DN10-F1 31.0015.0 MODELS ADDED OCTOBER 2024 OF15/DN15-HT 31.0024.0 OV15/DN15-HT 31.0022.0 MODELS ADDED NOVEMBER 2024 OF15/DN10-F1-pr 31.0074.0 OF15/DN15 31.0006.0 OF15/DN15-GF 31.0007.0 OF15/DN15-pr 31.0069.0 OV15/DN15-EPDM 31.0001.0 Models added December 2024: OV15/DN15-pr 31.0070.0 OF15/DN15-EPDM 31.0032.0 Models added December 2024 OF20/DN20 31.4520.0 OF20/DN20-EPDM 31.0057.0 OF20/DN20-PR 31.4289.0 OV20-DN20-pr 31.0072.0 OV40/DN40 31.4240.0 OV50/DN50 31.4250.0 Models added June 2025: OV20/DN20-HT 31.0012.0 OV25/DN25-HT 31.0028.0

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company