Front loading, commercial washing machine. Flow is supplied via solenoid valves and the unit incorporates a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2012326

Size:

Stainless steel braided EPDM lined flexible hose assembly with ¾” captive nut end connectors.

Marking:

Schulthess logo, Schulthess and Professional Swiss made on front of machine. Schulthess, model, address and technical information on rear of unit.

Installation Requirements:

R001 R160 R574

Expiry date:

31/12/2025

Model:

proLine W65– 7 Kg capacity – product code 4201.1 proLine W80 – 9 Kg capacity – product code 4202.1 proLine W100 – 11 Kg capacity – product code 4203.1 Models added September 2021: proLine W130 – 14 Kg capacity – product code 4204.1 proLine W160 – 18 Kg capacity – product code 4205.1 Variant codes can be applied after the product code and consist of the following: B – pre paid card system B1 – expert plus control H – elevated plinth with lint filter I – USB interface K – elevated plinth L – chrome steel housing N – powerline lock set P – drain pump (not applicable to W130 or W160 models) U – anthracite colour way V – drain valve Y – possibility to attach to external detergents

Product Images

Approval Holder:

Schulthess Maschinen AG

Company Name

Schulthess Maschinen AG

Address

Landstrasse 37 Wolfhaussen Switzerland

Postcode

CH8633

Phone

0041 (0)55 253 51 11

View All Listings by this Company

Manufacturer:

Schulthess Maschinen AG

Company Name

Schulthess Maschinen AG

Address

Landstrasse 37 Wolfhaussen Switzerland

Postcode

CH8633

Phone

0041 (0)55 253 51 11

View All Listings by this Company

Range of undercounter or deck mounted drinking water fountains which dispense ambient and/or chilled water. Flow is controlled via a solenoid valve and the products are activated via a push button or infa-red sensor . Maximum working pressure 7.0 bar. Cold water use only.

Section:

2420 Water Coolers

Section Subtitle:

Drinking.

WRAS Approval Number:

2101330

Size:

10mm copper tube

Marking:

Oasis on bottle filler. Model and other technical information on chiller unit.

Installation Requirements:

R001 R006 R150

Expiry date:

31/01/2026

Model:

Push button: PWSBFY MWSBFY PWSMSBFY MWSMSBFY MW8SBFY MWSM8SBFY Infa-red sensor: PWEBFY MWEBFY PWSMEBFY MWSMEBFY MW8EBFY MWSM8EBFY Code: PW = retrofit, MW = recessed, SM = surface mounted, EBF = IR activated, SBF button activated, S = non refrigerated, Y = 230v

Product Images

Approval Holder:

Oasis

Company Name

Oasis

Address

Bunree Industrial Estate Ballina Co. Mayo Republic of Ireland

Postcode

F26 D5RS

View All Listings by this Company

'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. Between 1st January 2021 to 22nd November 2021, the material is for use with water up to 50°C. Between 23rd November 2021 and 31st January 2026, the material is for use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2101522

Expiry date:

31/01/2026

Approval Holder:

Shalimar Paints Limited

Company Name

Shalimar Paints Limited

Address

Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403

Country

India

View All Listings by this Company

'81661723' washers. Black coloured, resin impregnated carbon graphite washer components manufactured by isotactic pressing, sintering and grinding. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

28/02/2026

Approval Holder:

John Crane

Company Name

John Crane

Address

29 Burdent Dr. #31, Crystal Lake, IL 60014

Country

United States

View All Listings by this Company

'D-1375-077'. Grey coloured, resin impregnated carbon graphite washers manufactured by isotactic pressing, sintering and grinding. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

28/02/2026

Approval Holder:

John Crane

Company Name

John Crane

Address

29 Burdent Dr. #31, Crystal Lake, IL 60014

Country

United States

View All Listings by this Company