Directory Search Results

Print List

#240355056

'ENDOPRENE® 851 Blanc'. Factory applied, white coloured, two-component polyurethane coating. Mix parts A & B in 50:50 volume ratio and apply as per manufacturer's TDS dated 10/07/2024. Cure for 6 days@40°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
240355056
Expiry date:
31/03/2029

Approval Holder:
BS Coatings
Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

Print This Approval


#240855022

'175-767 Polyester blue 5012'. Factory applied, blue coloured polyester coating. Apply as per manufacturer's instructions updated '15.03.2018'. Cure for 10 minutes@180°C. For use with water up to 55°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
240855022
Expiry date:
31/08/2029

Approval Holder:
Tambour
Company Name
Tambour
Address
Tambour 6 Meir Ariel St. Netanya, 2412102
Country
Israel

View All Listings by this Company

Print This Approval


#240855028

'Series 2000 RAL 5015'. Factory applied, blue coloured epoxy resin coating. Apply as per manufacturer’s data application sheet ‘Revision: 6 (2018/10/01)’ created ‘2015/11/11’. Cure for 10 minutes@180°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
240855028
Expiry date:
31/08/2029

Approval Holder:
Klinger (Pty) Ltd.
Company Name
Klinger (Pty) Ltd.

View All Listings by this Company

Print This Approval


#240855035

'MJ-6'. Factory applied, blue coloured epoxy resin powder coating. Mix in a 63%/21.8%/13.2%/2% ratio and apply as per manufacturers instructions 'v1', dated '06-05-2023'. Cure for 60 minutes@200°C. For use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
240855035
Expiry date:
31/08/2029

Approval Holder:
Anhui Meijia New Materials Co., Ltd.
Company Name
Anhui Meijia New Materials Co., Ltd.
Address
Economic Development Zone, Fanchang County, Wuhu City, Anhui Province
Country
China

View All Listings by this Company

Print This Approval


#240755058

'novapress®BASIC'. Orange coloured NBR/aramid fibre gasket material, manufactured by calendaring. For use with water up to 85°C. For use only as a gasket material having been tested at a reduced surface area to volume ratio.

Section:
5075 Fibre
Section Subtitle:
These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:
240755058
Expiry date:
31/07/2029

Approval Holder:
Frenzelit GmbH
Company Name
Frenzelit GmbH
Address
Frankenhammer, 95460 Bad Berneck
Country
Germany
Phone
Tel: 0049 9273 720 Fax: 0049 9273-222

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 955 of 1622

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.