Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240402014

Three hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating quarter turn ceramic disc headworks with cross top or lever type operating members. The spout outlets incorporate a plastic aerator. The products are supplied with stainless steel braided PEX lined flexible connecting hose assemblies, for use between side body valves and spout. Maximum working pressure - 10 Bar. Maximum operating temperature - 70°C.

Section:: 0660 Combination Tap Assemblies
Section Subtitle:: Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 240402014
Note:: The products are supplied with a lever type pop up waste set – Not verified by test
Size:: Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connectors.
Marking:: AXOR on body
Installation Requirements:: R001 R006 R007 R009 R010
Expiry date:: 30/04/2029
Model:: 16 513 xx0 16 514 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #240402048

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): boiling, chilled or sparkling water. Ambient (hot and cold) water is controlled via a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator on the Sparkling/Chilled and the Ambient outlet, and a separate outlet for the boiling water. Both model ranges incorporate a vent outlet within the tap spout for the boiling water circuit. Maximum working pressure 5.0 bar (Ambient (hot and cold) circuit only). 95458xxx models - Boiling circuit has a maximum operating temperature of 100°C. All other circuits have a maximum operating temperature of 65°C. 95459xxx models - Boiling circuit has a maximum operating temperature of 100°C. The ambient circuit has a maximum operating temperature of 65°C. The chilled/sparkling circuit has a maximum operating temperature of 60°C.

Section:: 0682 Combination Tap Assemblies
Section Subtitle:: Spout outlet(s).
WRAS Approval Number:: 240402048
Note:: Boiling, chilled or sparkling water circuits - Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings.
Size:: Ambient hot and cold inlets: Hot: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Cold: ½” BSP (F) to tee piece installed prior to a stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Boiling water: 8mm OD s/steel spigot (attached to tubing). Chilled or Chilled/sparkling water (model dependent): 8mm OD s/steel spigot (attached to tubing).
Marking:: ZIP on operating member
Installation Requirements:: R001 R006 R007 R008 R009
Expiry date:: 30/04/2029
Model:: Celsius Plus All-in-one Boiling/Chilled: 95458xxx. Celsius Plus All-in-one Boiling/Chilled/Sparkling: 95459xxx. Where xxx denotes finish and can be replaced with: Z00 = Chrome, Z01 = Brushed Chrome, Z03 = Matt Black.

Product Images

Approval Holder:: Zip Heaters UK Ltd T/A Zip Water UK

Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

WRAS Approval Number: #240402057

Deck mounted, fixed, bath spout (brass bodies with various finishes) with a manual diverter to shower. Maximum working pressure 5.0 bar. Maximum operating temperature 85 °C.

Section:: 0682 Combination Tap Assemblies
Section Subtitle:: Spout outlet(s).
WRAS Approval Number:: 240402057
Size:: ½” BSP (M).
Marking:: Lefroy Brooks logo on underside of spout.
Installation Requirements:: R001 R005 R020
Expiry date:: 30/04/2029
Model:: PSH008 YY. Understanding the product codes: First group of three letters and three numbers (PSH008). These are codes that remains constant and relate to the individual design of the spout. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome

Product Images

Approval Holder:: Lefroy Brooks

Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

WRAS Approval Number: #240211001

Hep2O range of polybutylene fittings for use with Hep2O PB barrier pipe. In May 2024, Next generation (G5) of Hep20 pushfit fittings for use with the Hep20 range of PB barrier pipe, were added to the approval. Maximum working pressure 10.0 bar at 95°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240211001
Size:: 10, 15, 22 & 28mm
Marking:: Hep20 on fittings. Wavin, Hep20 and product info on pipe. Fittings added May 2024: Wavin, Hep2O, Keyless and size on fitting.
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: HD1/10W HEP2O PB STRAIGHT CONNECTOR WT 10 HD1/15W HEP2O PB STRAIGHT CONNECTOR WT 15 HD1/22W HEP2O PB STRAIGHT CONNECTOR WT 22 HD1/28W HEP2O PB STRAIGHT CONNECTOR WT 28 HD5/10W HEP2O PB ELBOW 90° WT 10 HD5/15W HEP2O PB ELBOW 90° WT 15 HD5/22W HEP2O PB ELBOW 90° WT 22 HD5/28W HEP2O PB ELBOW 90° WT 28 HD10/10W HEP2O PB EQUAL TEE WT 10 HD10/15W HEP2O PB EQUAL TEE WT 15 HD10/22W HEP2O PB EQUAL TEE WT 22 HD10/28W HEP2O PB EQUAL TEE WT 28 HD62/10W HEP2O PB DEMOUNTABLE PIPE END CAP WT 10 HD62/15W HEP2O PB DEMOUNTABLE PIPE END CAP WT 15 HD62/22W HEP2O PB DEMOUNTABLE PIPE END CAP WT 22 HD62/28W HEP2O PB DEMOUNTABLE PIPE END CAP WT 28 HX60/10W HEP2O SMARTSLEEVE PIPE SUPPORT 10 HX60/15W HEP2O SMARTSLEEVE PIPE SUPPORT 15 HX60/22W HEP2O SMARTSLEEVE PIPE SUPPORT 22 HX60/28W HEP2O SMARTSLEEVE PIPE SUPPORT 28 HD4/10W HEP2O ELBOW 90° SPIGOT W 10 PF/SP HD4/15W HEP2O ELBOW 90° SPIGOT WT 15 PF/SP HD4A/15W HEP2O ELBOW 90° SPIGOT RED W 15X10 PF/SP HD4/22W HEP2O ELBOW 90° SPIGOT WT 22 PF/SP HD2/15W HEP2O PB SOCKET REDUCER WT 15X10 PF/SP HD2/22W HEP2O PB SOCKET REDUCER WT 22X15 PF/SP HD2/28W HEP2O PB SOCKET REDUCER WT 28X22 PF/SP HD3B/15W HEP2O PB SKT/SKT REDUCER WT 15X10 HD3B/22W HEP2O PB SKT/SKT REDUCER WT 15X22 HD3C/22W HEP2O PB SKT/SKT REDUCER WT 22X10 HD8/10W HEP2O PB ELBOW 45° SPIGOT W 10 PF/SP HD8/15W HEP2O OBTUSE BEND 135° SPIGOT WT15 PF/SP HD8/22W HEP2O PB ELBOW 45° SPIGOT WT 22 PF/SP HD12/22W HEP2O PB END REDUCED TEE WT 22X15X22 HD12/28W HEP2O PB END RED TEE 28X22X28 HD18/15W HEP2O PB TEE REDUCED BOTH END W 10X10X15 HD18A/22W HEP2O PB TEE REDUCED BOTH END W 10X10X22 HD18/22W HEP2O PB TEE REDUCED BOTH END W 15X15X22 HD18/28W HEP2O PB TEE REDUCED BOTH END W 22X22X28 HD13/15W HEP2O PB BRANCH RED TEE 90° W 15X15X10 HD13A/22W HEP2O PB BRANCH RED TEE 90° W 22X22X10 HD13/22W HEP2O PB BRANCH RED TEE 90° WT 22X22X15 HD13A/28W HEP2O PB BRANCH RED TEE 90° W 28X28X15 HD13/28W HEP2O PB BRANCH RED TEE 90° W 28X28X22 HD15/15W HEP2O BRANCH REDUCED TEE SPIGOT W 15X10 HD15/22W HEP2O BRANCH REDUCED TEE SPIGOT W 22X15 HD14/15W HEP2O BRANCH & END RED TEE W 15X10X10 HD14A/22W HEP2O BRANCH & END RED TEE W 22X10X10 HD14/22W HEP2O BRANCH & END RED TEE W 22X15X15 HD14/28W HEP2O BRANCH & END RED TEE W 28X22X22 HX44/10W HEP2O BLANKING PEG 10 HX44/15W HEP2O BLANKING PEG 15 HX44/22W HEP2O BLANKING PEG 22 HX44/28W HEP2O BLANKING PEG 28 HX20/15W HEP2O TANK CONNECTOR 15X1/2 HX20/22W HEP2O TANK CONNECTOR 22X3/4 HX20/28W HEP2O TANK CONNECTOR 28X1" PF/TM HD25A/15W HEP2O PB STRAIGHT TAP CONN WT 15X1/2" HD25B/15W HEP2O PB STRAIGHT TAP CONN WT 15X3/4" HD25B/22W HEP2O PB STRAIGHT TAP CONNECTOR WT 22X3/4” HD27/15W HEP2O BENT TAP CONNECTOR 90° WT 15X1/2" HD26A/10W HEP2O HAND TITAN TAP CONNECTOR W 10X1/2 HD26A/15W HEP2O HAND TITAN TAP CONNECTOR WT 15X1/2 HD26B/15W HEP2O HAND TITAN TAP CONNECTOR WT 15X3/4 HD26B/22W HEP2O HAND TITAN TAP CONNECTOR WT 22X3/4 HX88/22W HEP20 2 PORT MANIFOLD 22 x 15 PF/SP SAME SIDE HX88B/22W HEP20 2 PORT MANIFOLD 22 x 15 PF/PF SAME SIDE ‘Hep2O’ PB barrier pipe: 10mm, - Mitsui P5250N+MB50 barrier pipe 15mm, 22mm & 28mm - LYB Barrier Pipes Models added May 2024: 3093456 - KL1-10 KL PB STRAIGHT CONNECTOR WT 10 3093604 - KL1-15 KL PB STRAIGHT CONNECTOR WT 15 3093492 - KL1-22 KL PB STRAIGHT CONNECTOR WT 22 3093641 - KL1-28 KL PB STRAIGHT CONNECTOR WT 28 3093500 - KL5-10 KL PB ELBOW 90° WT 10 3093458 - KL5-15 KL PB ELBOW 90° WT 15 3093611 - KL5-22 KL PB ELBOW 90° WT 22 3093545 - KL5-28 KL PB ELBOW 90° WT 28 3093508 - KL10-10 KL PB EQUAL TEE WT 10 3093561 - KL10-15 KL PB EQUAL TEE WT 15 3093485 - KL10-22 KL PB EQUAL TEE WT 22 3093636 - KL10-28 KL PB EQUAL TEE WT 28 3093631 - KL62-10 KL PB DEMOUNTABLE PIPE END CAP W 10 3093511 - KL62-15 KL PB DEMOUNTABLE PIPE END CAP WT 15 3093453 - KL62-22 KL PB DEMOUNTABLE PIPE END CAP WT 22 3093569 - KL62-28 KL PB DEMOUNTABLE PIPE END CAP WT 28 3093645 - HX60/10W SMARTSLEEVE PIPE SUPPORT 10 3093634 - HX60-15W SMARTSLEEVE PIPE SUPPORT 15 3093531 - HX60/22W SMARTSLEEVE PIPE SUPPORT 22 3093509 - HX60/28W SMARTSLEEVE PIPE SUPPORT 28 3093513 - KL4-10 KL ELBOW 90° SPIGOT W 10 PF/SP 3093659 - KL4-15 KL ELBOW 90° SPIGOT WT 15 PF/SP 3093629 - KL4A-15 KL ELBOW 90° SPIGOT RED W 15X10 PF/SP 3093605 - KL4-22 KL ELBOW 90° SPIGOT WT 22 PF/SP 3093585 - KL2-15 KL PB SOCKET REDUCER WT 15X10 PF/SP 3093598 - KL2-22 KL PB SOCKET REDUCER WT 22X15 PF/SP 3093665 - KL2-28 KL PB SOCKET REDUCER WT 28X22 PF/SP 3093585 - KL3B-15 KL PB SKT/SKT REDUCER WT 15X10 3093644 - KL3B-22 KL PB SKT/SKT REDUCER WT 15X22 3093638 - KL3C-22 KL PB SKT/SKT REDUCER WT 22X10 3093608 - KL8-10 KL PB ELBOW 45° SPIGOT W 10 PF/SP 3093454 - KL8-15 KL OBTUSE BEND 135° SPIGOT WT15 PF/SP 3093537 - KL8-22 KL PB ELBOW 45° SPIGOT WT 22 PF/SP 3093510 - KL12-22 KL PB END REDUCED TEE WT 22X15X22 3093495 - KL12-28 KL PB END RED TEE 28X22X28 3093632 - KL13-15 KL PB BRANCH RED TEE 90° W 15X15X10 3093656 - KL13A-22 KL PB BRANCH RED TEE 90° W 22X22X10 3093519 - KL13-22 KL PB BRANCH RED TEE 90° WT 22X22X15 3093576 - KL13A-28 KL PB BRANCH RED TEE 90° W 28X28X15 3093541 - KL13-28 KL PB BRANCH RED TEE 90° W 28X28X22 3093503 - KL15-15 KL BRANCH REDUCED TEE SPIGOT W 15X10 3093516 - KL15-22 KL BRANCH REDUCED TEE SPIGOT W 22X15 3093650 - KL14-15 KL BRANCH & END RED TEE W 15X10X10 3093615 - KL14A-22 KL BRANCH & END RED TEE W 22X10X10 3093591 - KL14-22 KL BRANCH & END RED TEE W 22X15X15 3093498 - KL14-28 KL BRANCH & END RED TEE W 28X22X22 3093560 - HX44/10W 10mm 3093556 - HX44/15W 15mm 3093530 - HX44/22W 22mm 3093647 - HX44/28W 28mm 3093544 - KL20-15 KL TANK CONNECTOR 15X1/2 3093507 - KL20-22 KL TANK CONNECTOR 22X3/4 3093568 - KL20-28HX KL TANK CONNECTOR 28X1" PF/TM 3093527 - KL25A-15 KL PB STRAIGHT TAP CONN WT 15X1/2" 3093653 - KL25B-15 KL PB STRAIGHT TAP CONN WT 15X3/4" 3093548 - KL25B-22 KL PB STRAIGHT TAP CONNECTOR WT 22X3/4" 3093552 - KL27-15 KL BENT TAP CONNECTOR 90° WT 15X1/2" 3093573 - KL26A-10 KL HAND TITAN TAP CONNECTOR W 10X1/2 3093626 - KL26A-15 KL HAND TITAN TAP CONNECTOR WT 15X1/2 3093525 - KL26B-15 KL HAND TITAN TAP CONNECTOR WT 15X3/4 3093481 - KL26B-22 KL HAND TITAN TAP CONNECTOR WT 22X3/4 3093616 - KL6-15 Wall Plate Elbow White 15x1/2” 3093526 - KL6-22 Wall Plate Elbow White 22x3/4” 3093613 - KL88-22 2 Port Manifold 22x15 PF-SP 3093577 - KL88B-22 2 Port Manifold 22x15 PF-PF 3093547 - KL89-22 3 Port Manifold 22x15 PF-SP 3093607 - KL89B-22 2 Port Manifold 22x15 PF-PF 3093657 - KL92-22 2 Port Manifold 22x10 PF-SP 3093622 - KL92B-22 2 Port Manifold 22x10 PF-PF 3093648 - KL94-22 4 Port Manifold 22x10 PF-SP 3093654 - KL94B-22 4 Port Manifold 22x10 PF-PF 3093520 - KL96-22 4 Port Manifold 22x10 PF-SP 3093506 - KL96B-22 4 Port Manifold 22x10 PF-PF 3093602 - KL18-15 KL PB TEE REDUCED BOTH END W 10X10X15 3093635 - KL18A-22 KL PB TEE REDUCED BOTH END W 10X10X22 3093595 - KL18-22 KL PB TEE REDUCED BOTH END W 15X15X22 3093581 - KL18-28 KL PB TEE REDUCED BOTH END W 22X22X28 3093483 – 31-15 KL BRASS ADAPTOR 15X1/2” SP/TM 3093553 – 31-22 KL BRASS ADAPTOR 22X3/4" SP/TM 3093567 – 31-28 KL BRASS ADAPTOR 28X1" SP/TM 3093533 – 30-15 KL BRASS ADAPTOR 15X1/2" SP/TF 3093489 – 30-22 KL BRASS ADAPTOR 22X3/4" SP/TF 3093588 – 30-28 KL BRASS ADAPTOR 28X1" SP/TF Hep2O PB Barrier Pipe – 10, 15, 22 & 28mm

Product Images

Approval Holder:: Wavin Ltd.

Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company
Manufacturer:: Wavin Ltd.

Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company

WRAS Approval Number: #240404010

Range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404010
Size:: see models
Marking:: YS, size etched on body. (Note: For 66.7mm models it will be marked as 67mm, for 76.1mm models it will be marked as 76mm, for 88.9mm it will be marked as 89mm)
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: STRAIGHT COUPLING CxC: 6270.15 - 15mm 6270.22 - 22mm 6270.28 - 28mm 6270.35 - 35mm 6270.42 - 42mm 6270.54 - 54mm 6270.67 - 66.7mm 6270.76 - 76.1mm 6270.89 - 88.9mm 6270.108 - 108mm SLIP COUPLING C x C: 6270L.15 - 15mm 6270L.22 - 22mm 6270L.28 - 28mm 6270L.35 - 35mm 6270L.42 - 42mm 6270L.54 - 54mm 6270L.67 - 66.7mm 6270L.76 - 76.1mm 6270L.89 - 88.9mm 6270L.108 - 108mm REDUCING COUPLING C x C: 6240.2215 - 22mm x 15mm 6240.2815 - 28mm x 15mm 6240.2822 - 28mm x 22mm 6240.3515 - 35mm x 15mm 6240.3522 - 35mm x 22mm 6240.3528 - 35mm x 28mm 6240.4215 - 42mm x 15mm 6240.4222 - 42mm x 22mm 6240.4228 - 42mm x 28mm 6240.4235 - 42mm x 35mm 6240.5415 - 54mm x 15mm 6240.5422 - 54mm x 22mm 6240.5428 - 54mm x 28mm 6240.5435 - 54mm x 35mm 6240.5442 - 54mm x 42mm 6240.6728 - 66.7mm x 28mm 6240.6735 - 66.7mm x 35mm 6240.6742 - 66.7mm x 42mm 6240.6754 - 66.7mm x 54mm 6240.7635 - 76.1mm x 35mm 6240.7642 - 76.1mm x 42mm 6240.7654 - 76.1mm x 54mm 6240.7667 - 76.1mm x 66.7mm 6240.8942 - 88.9mm x 42mm 6240.8954 - 88.9mm x 54mm 6240.8967 - 88.9mm x 66.7mm 6240.8976 - 88.9mm x 76.1mm 6240.10842 - 108mm x 42mm 6240.10854 - 108mm x 54mm 6240.10867 - 108mm x 66.7mm 6240.10876 - 108mm x 76.1mm 6240.10889 - 108mm x 88.9mm FITTING REDUCER F x C: 6243.2215 - 22mm x 15mm 6243.2815 - 28mm x 15mm 6243.2822 - 28mm x 22mm 6243.3515 - 35mm x 15mm 6243.3522 - 35mm x 22mm 6243.3528 - 35mm x 28mm 6243.4215 - 42mm x 15mm 6243.4222 - 42mm x 22mm 6243.4228 - 42mm x 28mm 6243.4235 - 42mm x 35mm 6243.5415 - 54mm x 15mm 6243.5422 - 54mm x 22mm 6243.5428 - 54mm x 28mm 6243.5435 - 54mm x 35mm 6243.5442 - 54mm x 42mm 6243.6728 - 66.7mm x 28mm 6243.6735 - 66.7mm x 35mm 6243.6742 - 66.7mm x 42mm 6243.6754 - 66.7mm x 54mm 6243.7635 - 76.1mm x 35mm 6243.7642 - 76.1mm x 42mm 6243.7654 - 76.1mm x 54mm 6243.7667 - 76.1mm x 66.7mm 6243.8942 - 88.9mm x 42mm 6243.8954 - 88.9mm x 54mm 6243.8967 - 88.9mm x 66.7mm 6243.8976 - 88.9mm x 76.1mm 6243.10842 - 108mm x 42mm 6243.10854 - 108mm x 54mm 6243.10867 - 108mm x 66.7mm 6243.10876 - 108mm x 76.1mm 6243.10889 - 108mm x 88.9mm 90DEG ELBOW C x C: 6002.15 - 15mm 6002.22 - 22mm 6002.28 - 28mm 6002.35 - 35mm 6002.42 - 42mm 6002.54 - 54mm 6002.67 - 66.7mm 6002.76 - 76.1mm 6002.89 - 88.9mm 6002.108 - 108mm 90DEG STREET ELBOW F x C: 6001.15 15mm 6001.22 22mm 6001.28 28mm 6001.35 35mm 6001.42 42mm 6001.54 54mm 6001.67 66.7mm 6001.76 76.1mm 6001.89 88.9mm 6001.108 108mm 45DEG ELBOW C x C: 6041.15 - 15mm 6041.22 - 22mm 6041.28 - 28mm 6041.35 - 35mm 6041.42 - 42mm 6041.54 - 54mm 6041.67 - 66.7mm 6041.76 - 76.1mm 6041.89 - 88.9mm 6041.108 - 108mm 45DEG STREET ELBOW F x C: 6040.15 - 15mm 6040.22 - 22mm 6040.28 - 28mm 6040.35 - 35mm 6040.42 - 42mm 6040.54 - 54mm 6040.67 - 66.7mm 6040.76 - 76.1mm 6040.89 - 88.9mm 6040.108 - 108mm CAP C x C: 6301.15 - 15mm 6301.22 - 22mm 6301.28 - 28mm 6301.35 - 35mm 6301.42 - 42mm 6301.54 - 54mm 6301.67 - 66.7mm 6301.76 - 76.1mm 6301.89 - 88.9mm 6301.108 - 108mm EQUAL TEE C x C: 6130.15 - 15mm 6130.22 - 22mm 6130.28 - 28mm 6130.35 - 35mm 6130.42 - 42mm 6130.54 - 54mm 6130.67 - 66.7mm 6130.76 - 76.1mm 6130.89 - 88.9mm 6130.108 - 108mm PART CROSSOVER F x C: 6086.15 - 15mm 6086.22 - 22mm CROSSOVER C x C: 6085.15 - 15mm 6085.22 - 22mm REDUCER ELBOW 6090.2215 - 22mm x 15mm 6090.2815 - 28mm x 15mm 6090.2822 - 28mm x 22mm REDUCING TEE: 6130R.221515 - 22mm x 15mm x 15mm 6130R.222215 - 22mm x 22mm x 15mm 6130R.282222 - 28mm x 22mm x 22mm 6130R.282822 - 28mm x 28mm x 22mm 6130R.281522 - 28mm x 15mm x 22mm 6130R.282815 - 28mm x 28mm x 15mm 6130R.352222 - 35mm x 22mm x 22mm 6130R.353522 - 35mm x 35mm x 22mm 6130R.353528 - 35mm x 35mm x 28mm 6130R.423535 - 42mm x 35mm x 35mm 6130R.152215 - 15mm x 22mm x 15mm 6130R.222822 - 22mm x 28mm x 22mm 6130R.221522 - 22mm x 15mm x 22mm 6130R.281528 - 28mm x 15mm x 28mm 6130R.282228 - 28mm x 22mm x 28mm 6130R.351535 - 35mm x 15mm x 35mm 6130R.352235 - 35mm x 22mm x 35mm 6130R.352835 - 35mm x 28mm x 35mm 6130R.421542 - 42mm x 15mm x 42mm 6130R.422242 - 42mm x 22mm x 42mm 6130R.422842 - 42mm x 28mm x 42mm 6130R.423542 - 42mm x 35mm x 42mm 6130R.541554 - 54mm x 15mm x 54mm 6130R.542254 - 54mm x 22mm x 54mm 6130R.542854 - 54mm x 28mm x 54mm 6130R.543554 - 54mm x 35mm x 54mm 6130R.544254 - 54mm x 42mm x 54mm 6130R.672867 - 66.7mm x 28mm x 66.7mm 6130R.673567 - 66.7mm x 35mm x 66.7mm 6130R.674267 - 66.7mm x 42mm x 66.7mm 6130R.675467 - 66.7mm x 54mm x 66.7mm 6130R.762276 - 76.1mm x 22mm x 76.1mm 6130R.762876 - 76.1mm x 28mm x 76.1mm 6130R.763576 - 76.1mm x 35mm x 76.1mm 6130R.764276 - 76.1mm x 42mm x 76.1mm 6130R.765476 - 76.1mm x 54mm x 76.1mm 6130R.766776 - 76.1mm x 66.7mm x 76.1mm 6130R.894289 - 88.9mm x 42mm x 88.9mm 6130R.895489 - 88.9mm x 54mm x 88.9mm 6130R.896789 - 88.9mm x 66.7mm x 88.9mm 6130R.897689 - 88.9mm x 76.1mm x 88.9mm 6130R.10854108 - 108mm x 54mm x 108mm 6130R.10867108 - 108mm x 66.7mm x 108mm 6130R.10876108 - 108mm x 76.1mm x 108mm 6130R.10889108 - 108mm x 88.9mm x 108mm

Product Images

Approval Holder:: Linhai Yongsheng Pipe Co., Ltd

Company Name
Linhai Yongsheng Pipe Co., Ltd
Address
NO 7-270 FENXI VILLAGE DUQIAO LINHAI
Country
Zhejiang
Phone
0086-576-85528969

View All Listings by this Company
Manufacturer:: Linhai Yongsheng Pipe Co., Ltd

Company Name
Linhai Yongsheng Pipe Co., Ltd
Address
NO 7-270 FENXI VILLAGE DUQIAO LINHAI
Country
Zhejiang
Phone
0086-576-85528969

View All Listings by this Company