Directory Search Results

Print List

#2207373

Range of wall hung, gas fired, combination boilers providing domestic hot water via a plate heat exchanger. The primary circuit incorporates an integral expansion vessel and a pressure relief valve set at 3.0 bar. The product is supplied with a rigid pipe filling loop, followed by a separate isolation valve. The filling loop pipe attaches to the cold water inlet valve which incorporates a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3) on the branch to the filling loop. The primary circuit includes an isolation valve on the flow and return and is also supplied with two loose 22mm compression isolation valves and a filter. Maximum working pressure of the primary circuit is 2.5 bar and the maximum supply pressure to the secondary circuit is 10.0 bar. Max operating temperature 65°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2207373
Size:
Secondary: 15mm compression. Primary: 22mm compression.
Marking:
KESTON printed on front casing. Model and size printed on drop down door.
Installation Requirements:
R001 R140 R360
Expiry date:
31/07/2027
Proviso:
Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
KESTON COMBI² C30 & KESTON COMBI² C35 COMBINATION BOILERS

Approval Holder:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Print This Approval


#2203035

Range of static ultrasonic bulk water meters with stainless steel bodies and EPDM 'O'-rings. The products are supplied with two sets of optional (green) gaskets. Maximum operating temperature: Products marked T50: 65°C. Products marked T30: cold water use only.

Section:
1505 Water Meters
Size:
DN50 - DN100 flanged inlet and outlet.
Marking:
DIEHL METERING, CE, DN, maximum pressure, model name, T30 or T90, and other technical info on meter housing. Diehl Metering GmbH logo and flow arrow on body.
Installation Requirements:
R001 R008 R120
Expiry date:
31/03/2027
Model:
HYDRUS 2.0 Type 174 stainless steel (DN50-80: 200mm length, DN100: 250mm length).

Approval Holder:
Diehl Metering GmbH
Company Name
Diehl Metering GmbH
Address
Industriestraße 13 91522 Ansbach
Country
Germany

View All Listings by this Company
Manufacturer:
Diehl Metering GmbH
Company Name
Diehl Metering GmbH
Address
Industriestraße 13 91522 Ansbach
Country
Germany

View All Listings by this Company

Print This Approval


#2302700

Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
Flanged inlet/outlet: DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400.
Marking:
Flow arrow & size on side of body, NWM Logo, size, Model number and pressure rating and product info on dial face.
Installation Requirements:
R001
Expiry date:
29/02/2028
Model:
WP-SDC

Approval Holder:
Ningbo Water Meter (Group) Co., Ltd
Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

Print This Approval


#2211317

Range of in-line ultrasonic water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
Please refer to model.
Marking:
Sensus on cover. Cordonel on box.
Installation Requirements:
R001
Expiry date:
30/11/2027
Model:
Cordonel DN65, Cordonel DN80 & Cordonel DN100.
Product Images

Approval Holder:
Sensus UK Systems
Company Name
Sensus UK Systems
Address
North Wing Central 40, Crockford Lane, Basingstoke
Postcode
RG24 8GU

View All Listings by this Company
Manufacturer:
SensusGmbH Hannover
Company Name
SensusGmbH Hannover
Address
Meineckestrasse 10 30880 Laatzen
Postcode
Germany

View All Listings by this Company

Print This Approval


#2201904

Leak detection and prevention device consisting of an inline solenoid valve and flow meter. Maximum working pressure 10.0 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at 23°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2201904
Note:
Leak detection or anti-flooding claims made by the approval holder. has not been tested as part of this approval
Marking:
Andel on outer casing.
Installation Requirements:
R001 R008
Expiry date:
31/01/2027
Model:
600460 - FlowStop

Approval Holder:
Andel Ltd
Company Name
Andel Ltd
Address
Unit 1 Dodworth Business Park South, Upper Cliffe Road, Dodworth, Barnsley
Postcode
S75 3SP
Phone
01484845000
General Email
Nick.Lee@andel.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 937 of 2264

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.