Range of chemical dosing equipment which incorporate self-closing valves with a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 9.0 bar. Maximum operating temperature – 60ºC

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2012065

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Must be installed in the vertical plane.

Size:

¾” BSP male inlet

Marking:

SEKO, max pressure, max temperature and other technical info on label on housing.

Installation Requirements:

R001 R160

Expiry date:

31/12/2025

Model:

PXB1F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB1F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB1F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXB4F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB4F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB4F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXS1F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS1F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS1F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT PXS4F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS4F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS4F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT

Product Images

Approval Holder:

SEKO SpA

Company Name

SEKO SpA

Address

Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Easyzon range of chemical blenders, consisting of a reaction chamber and pressure reducing valve inlet arrangement only. Maximum working pressure 8.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2010093

Note:

The approval covers the reaction chamber and inlet valve arrangement only.

Size:

½” BSP (F)

Marking:

LUTZ JESCO ON LABEL ON BODY

Installation Requirements:

R001 R008 R120 R160 R170 R415 R575

Expiry date:

31/10/2025

Model:

LJED5/230 EASYZON D 5G/H SYSTEM, LJED10/230 EASYZON D 10G/H SYSTEM, LJED20/230 EASYZON D 20G/H SYSTEM & LJED40/230 EASYZON D 40G/H SYSTEM DOSING EQUIPMENT

Approval Holder:

LUTZ-JESCO GB LTD

Company Name

LUTZ-JESCO GB LTD

Address

UNIT C1, LOADES ECOPARC BLACKHORSE ROAD COVENTRY

Postcode

CV7 9FW

General Email

tosh.singh@lutz-jesco.com

View All Listings by this Company

Filling loop assembly, consisting of a stainless steel braided EPDM lined flexible hose, a lever operated brass spherical valve and a DZR brass double check valve assembly that incorporates a lever operated spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 23°C.

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Caleffi logo, CR, and flow arrow on mould on double check valve assembly body Caleffi logo mould on isolation valve body

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

300600 300600 CST

Product Images

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of Aquaterra PP-RCT socket fusion fittings for use with Aquaterra PP-RCT SDR 6 pipe and Aquaterra PP-RCT SDR 7.4 pipe (manufactured to EN ISO 15874). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012068

Size:

20mm, 25mm, 32mm, 40mm, 50mm & 63mm. Male & Female connections ½” to 2”

Marking:

For PIPE Trade name “AQUATERRA”, “FASER COMPOSITE STABIL PIPE PP-RCT”, size, SDR, “EN ISO 15874” “DIN 8077/8078”, code for machine, manufacture date and time (DD/MM/YYYY) (HH:MM:SS), manufacturing location, Batch number on pipe For Fitting Trade name “AQTERRA”, “PP-RCT TYPE 4”, PN and size on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Aquaterra PP-RCT SDR 6 Fiber PIPE AT6622032 AT6622532 AT6623232 AT6624032 AT6625032 AT6626332 Aquaterra PP-RCT SDR 7.4 Fiber PIPE AT6622025 AT6622525 AT6623225 AT6624025 AT6625025 AT6626325 Aquaterra PP-RCT Coupler ATPPRCT6554020 ATPPRCT6554025 ATPPRCT6554032 ATPPRCT6554040 ATPPRCT6554050 ATPPRCT6554063 Aquaterra PP-RCT Elbow 90° ATPPRCT6555020 ATPPRCT6555025 ATPPRCT6555032 ATPPRCT6555040 ATPPRCT6555050 ATPPRCT6555063 Aquaterra PP-RCT Equal Tee ATPPRCT6557025 ATPPRCT6557025 ATPPRCT6557032 ATPPRCT6557040 ATPPRCT6557050 ATPPRCT6557063 AquaTerra PP-RCT Reducer ATPPRCT6562520 ATPPRCT6564020 ATPPRCT6563225 ATPPRCT6564032 ATPPRCT6565025 ATPPRCT6565032 ATPPRCT6565040 ATPPRCT6566340 ATPPRCT6566350 AquaTerra PP-RCT Female Adaptor ATPPRCT7052012 ATPPRCT7052512 ATPPRCT7052534 ATPPRCT7053201 Aquaterra PP-RCT Male Adaptor ATPPRCT7062012 ATPPRCT7062512 ATPPRCT7062534 ATPPRCT7063201 ATPPRCT7064014 ATPPRCT7065012 ATPPRCT7066302 Aquaterra PP-RCT Female Elbow 90° ATPPRCT7082012 ATPPRCT7082512 Aquaterra PP-RCT Female Tee ATPPRCT7102012 ATPPRCT7102512 ATPPRCT7103212

Product Images

Approval Holder:

Aquagas Plastic Industries LLC

Company Name

Aquagas Plastic Industries LLC

View All Listings by this Company

Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-Xc/Al/PE-Xc pipes. For above ground use only. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012344

Size:

Please refer to model.

Marking:

Viega, size & technical information on fitting body. Viega Raxofix PE/Xc/Al/PE-Xc & technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Gunmetal Fittings : 5311 - Adapter with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ 53118 - Adapter with BSP (F) 16x½ 5312 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ 5313 - Plug-in piece 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 5313P - Plug-in piece 16x15 - 16x18 - 20x15 - 20x18 - 20x22 -25x22 - 32x28 5314 - 90° elbow with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 531411 - 90° elbow with BSP (M) 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1 5315 - Coupling 16x16 - 20x20 - 20x16 - 25x25 - 25x16 -25x20 - 32x32 - 32x16 - 32x20 - 32x25 53153 - Coupling 16x16 - 20x20 - 25x25 - 32x32 5316 - 90° elbow 16x16 - 20x20 - 25x25 - 32x32 53168 - 90° elbow with BSP (F) 16x½ 5317 - T-piece with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 5318 - T-piece 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 53188 - T-piece with BSP (F) 16x½x16 - 20x½x20 53189 - manifold with BSP (M) ½x16 532161 - mounting unit with BSP (F) 16x½x80/100/150 532171 - mounting unit with BSP (F) 16x½x70/100/150 532181 - mounting unit with BSP (F) 16x½x150 53223 - Plug-in piece 16 – 20 5323 - mounting unit with BSP (F) 16x½ 53243 - wall plate T-piece with BSP (F) 16x½x16 - 20x½x20 5325 - wall plate with BSP (F) 16x½x70 - 16x½x90 53254 - wall plate with BSP (M) 16x½ - 20x½ 53255 - wall plate with BSP (F) 16x½ - 20x½ - 20x¾ 53256 - double wall plate with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 53257 - double wall plate with BSP (F) 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25 532578 - Y-double wall plate with BSP (F) 16x16x½ - 20x20x½ - 25x25x½ 53258 - T-piece with BSP(F) 16x½x16 - 20x½x20 - 20x¾x20 5326 - 45° elbow 25x25 - 32x32 532605 - manifold with BSP (M) 16x¾x4 532606 - manifold with BSP (M/F) 16x¾x2 532607 - manifold with BSP (M) 16x¾x3 532608 - manifold with BSP (F) 16x¾x3 532609 - manifold with BSP (F) 16x¾x5 532631 - T-piece with BSP(M) ½x16 532632 - T-piece with plug-in end 15x16 53264 - T-piece with BSP(M) ½x16x16 - ¾x16x16 – ¾x20x20 5329 - screw fitting with viega cone 16x¾ – 20x¾ 53321 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 16x ½ x ¾ x55 - 20x ½ x ¾ x35 - 20x ½ x ¾ x47 533211 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x18 - 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x55 533231 - wall lead-in with BSP (M/F) 16x ½ x ¾ x30 53324 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 20x ½ x ¾ x35x20 - 20x ½ x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 5355 - 90° adapter with BSP (F) 16x½ - 16x¾ 5356 - Cap 16 - 20 - 25 - 32 5363 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ 5381 - screw fitting with euro cone 16x ¾ - 20x¾ multilayer pipe (PE-Xc/Al/PE-Xc): 5301 - Pipe with protective pipe in grey 16x2,2 - 20x2,8 5302 - Pipe coil 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53023 - Pipe with 25mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 53024 - Pipe with 13mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53025 - Pipe with 9mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53026 - Pipe with 6mm concentric insulation 16x2,2 - 20x2,8 5303 - Pipe stick 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 5304 - Pipe with 25mm excentric insulation 16x2,2 - 20x2,8 - 25x2,7 53041 - Pipe with 9mm excentric insulation 16x2,2 - 20x2,8

Product Images

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Manufacturer:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company