Range of wall mounted, three-hole single outlet (fixed) bath and shower mixers with brass bodies (various finishes - see model), incorporating quarter turn ceramic disc headworks with cross top or single lever operating members (see model) and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

240602049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The 10 303 180 Basic set is not approved in its own right.

Size:

½” BSP (F)

Marking:

Axor logo on spout

Installation Requirements:

R001 R030

Expiry date:

30/06/2029

Model:

10 303 180 Basic set for 3-hole wall mixer for concealed installation, which must be installed in conjunction with the following models: 39 441 xx0 (Cross Top) 39 447 xx0 (Cross Top) Models added June 2024: 39 442 xx0 (Single Lever) 39 448 xx0 (Single Lever) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of deck mounted spout outlets (brass bodies - various finishes). Supplied with metal backnuts. Open outlet use only Maximum operating temperature: 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240604029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) ½” BSP (M) x ¾” BSP (M)

Marking:

THG on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2029

Model:

29NIA/A/W - N°11 - 166mm Spout 29NIA/A/W – NIAGARA - 230mm Spout 29NIA/B/W – NIAGARA - 300mm Spout 29NIA/E/W - BELUGA/SHAO - 350mm Spout 29NIA/D/W – ELLIPSE - 400mm Spout Series: - 29NIA/A/W : U2A-Le 11 ; U2B-Le 11 à manettes ; A38-Niagara - 29NIA/B/W : A38-Niagara -- 29NIA/D/W : A44-Ellipse ; A38-Niagara - 29NIA/E/W : A33-Bambou cristal noir ; A34-Bambou cristal Ambre ; A35-Bambou cristal clair ; A39-Urban ; G1T-Beluga ; G1UBeluga à manettes Finishes: A02-Polished chrome ; B01-Polished nickel ; C01-Matt nickel ; D01-Lacquered light bronze ; D05-Lacquered mat bronze ; D30-Black ceram ; F01-polished gold ; F07-matt gold ; F30-soft gold ; F31-soft matt gold ; F33-Bronze brown color PVD ; F34-Matt brown bronze color PVD ; H49-Brass color PVD ; H50-Matt brass color PVD ; H52-Gold color PVD ; H53-Matt gold color PVD ;H55-nickel color PVD ; H56-Matt nickel color PVD ; H60-Matt blush color PVD ; H62-Blush color PVD ; H64-Graphite color PVD ; H65-Matt graphite color PVD ; H66-Umber color PVD ; H67-Matt umber color PVD A complete model number of compiles of a three-digit code from each section above, for example A38.29NIA/A/W. A02. This would give you a rim mounted waterfall bath spout 230mm in Niagara style and polished chrome finish.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, Zilmet and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

11GS000804 (8L Tradetec). 11GS001204 (12L Tradetec). 11GS001904 (18L Tradetec). 11GS002404 (24L Tradetec). 11GS003504 (35L Tradetec). 11GS005004 (50L Tradetec). 11GS006004 (80L Tradetec). 11GS008004 (100L Tradetec).

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207089

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

CORE model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

CORE (35, 50, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). CORE (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). CORE (8, & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CORE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2310157

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

2” or 2 ½” BSP (F)

Marking:

CORE, model, pressure, capacity and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: CORE 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: CORE 750L

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company