Directory Search Results

Print List

#2211507

'Addisil 2050E, 2060E, 2070E & 2080E'. Unpigmented (appear white, translucent), extruded silicone rubber materials. Shore hardness between 50 & 80. Tested in-radius size of 2.1mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2211507
Expiry date:
30/11/2027

Approval Holder:
Momentive Performance Materials GmbH
Company Name
Momentive Performance Materials GmbH
Address
Building V7 Chempark Leverkusen, D-51368, Leverkusen
Country
Germany
Phone
49-4152-938-300

View All Listings by this Company

Print This Approval


#2211509

'Permabond ET5365'. Site applied, grey coloured, two-component epoxy adhesive consisting of part A (light grey coloured paste) & part B (dark grey coloured paste). The product cartridge is heated to 30°C and the two-components are mixed in a 2:1 volume ratio. Apply as per manufacturer's TDS 'revision 1', dated 23 May 2018. Cure 24 hours@23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5460 Sealants - Flat Faced Joints
Section Subtitle:
Epoxide.
WRAS Approval Number:
2211509
Expiry date:
30/11/2027

Approval Holder:
Permabond Engineering Adhesives Ltd.
Company Name
Permabond Engineering Adhesives Ltd.
Address
Wessex Business Park, Wessex Way, Colden Common, Hampshire
Postcode
SO21 1WP
Phone
+44 (0) 1962 711 661
General Email
help.europe@permabond.com

View All Listings by this Company

Print This Approval


#2208544

'Interflon Paste HT1200'. Cream coloured ceramic paste. Apply as per manufacturer's instructions, document number 'IFUHT1200' dated 24/04/2017. Cure for 5 minutes@22°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2208544
Expiry date:
31/08/2027

Approval Holder:
Interflon UK Limited
Company Name
Interflon UK Limited
Address
Crofton House, Crofton Road, Portrack
Postcode
TS18 2QZ
Country
Stockton-on-Tees

View All Listings by this Company

Print This Approval


#2207532

'VRSY6090 + Nylon 6.6 Rubber Expansion Joint'. Black coloured, compression moulded composite rubber expansion joint which consists of chlorobutyl/EPDM rubber & embedded polyamide fabric. Shore hardness 55. Tested in-radius size 2.0mm. For use with water up to 23°C.

Section:
5335 Rubbers
Section Subtitle:
Butyl - components.
WRAS Approval Number:
2207532
Expiry date:
31/07/2027

Approval Holder:
ContiTech Luftfedersysteme GmbH.
Company Name
ContiTech Luftfedersysteme GmbH.
Address
Philipsbornstr. 1, 30165 Hannover, Germany

View All Listings by this Company

Print This Approval


#2207540

'ERV-R & ERP Rubber Expansion Joints'. Black coloured, compression moulded composite rubber expansion joint which consists of chlorobutyl/EPDM rubber & embedded polyamide fabric. The `ERV-R` joint has a red coloured band on the exterior and the `ERP` joint has a red coloured dot on the exterior. Shore hardness 55. Tested in-radius size 2.0mm. For use with water up to 23°C.

Section:
5335 Rubbers
Section Subtitle:
Butyl - components.
WRAS Approval Number:
2207540
Expiry date:
31/07/2027

Approval Holder:
ELAFLEX HIBY GmbH. & Co. KG
Company Name
ELAFLEX HIBY GmbH. & Co. KG
Address
Schnackenburgallee 121, 22525 Hamburg
Country
Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 898 of 2219

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.