Directory Search Results

Print List

#2209008

‘Aquapoint APIII’ range of direct unvented under basin or over basin (wall mounted) electrically heated, enamel lined insulated steel storage cylinders. The cylinders are supplied with an expansion relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2209008
Size:
½” BSP (M) inlet and outlet.
Marking:
Zip Aquapoint on body. Zip Water, Aquapoint, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2027
Model:
Under basin (models): AP3/05, AP3/10 & AP3/15. Over basin (wall mounted) models: AP3/05/OB, AP3/10/OB & AP3/15/OB. Where 05, 10 & 15 indicate capacity in litres.
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Tiki Doo Stara Pazova
Company Name
Tiki Doo Stara Pazova
Address
Golubinacki Put 1B Stara Pazova 22300 Serbia
General Email

View All Listings by this Company

Print This Approval


#2207350

Range of wall hung, gas fired, combination boilers providing domestic hot water via a plate heat exchanger. The primary circuit incorporates an integral expansion vessel and a pressure relief valve set at 3.0 bar. The product is supplied with a rigid pipe filling loop, followed by a separate isolation valve. The filling loop pipe attaches to the cold water inlet valve which incorporates a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3) on the branch to the filling loop. The primary circuit includes an isolation valve on the flow and return and is also supplied with two loose 22mm compression isolation valves and a filter. Maximum working pressure of the primary circuit is 2.5 bar and the maximum supply pressure to the secondary circuit is 10.0 bar. Max operating temperature 65°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2207350
Size:
Secondary: 15mm compression. Primary: 22mm compression.
Marking:
Ideal heating printed on front casing. Model and size printed on drop down door.
Installation Requirements:
R001 R140 R360
Expiry date:
31/07/2027
Proviso:
Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
Logic Max Combi² C24 – UIN 228334, Logic Max Combi² C30 – UIN 228335, Logic Max Combi² C35 – UIN 228336, Logic + Combi² C24 – UIN 228329, Logic + Combi² C30 – UIN 228330, Logic + Combi² C35 – UIN 228331, Logic Combi² C24 – UIN 228307, Logic Combi² C30 – UIN 228308, Logic Combi² C35 – UIN 228309.

Approval Holder:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company
Manufacturer:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Print This Approval


#2203372

Permanent filling/ pressurisation device for primary heating and chilled water closed circuits in domestic and non-domestic premises. The mains and closed circuit system pressures are continuously checked by two pressure sensors and their differential monitored by microprocessors. In the event of a fall in system pressure, and only if the mains pressure is adequate, a solenoid valve operates to allow water into the system. At all other times a second solenoid valve drains the fill chamber to waste, via tundish (meeting the requirements of an air gap to drain), and allowing air to be admitted via an automatic air vent to create an atmospheric disconnection across the transfer chamber. Maximum working pressure 6.0 Bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2203372
Size:
½” BSP (M)
Marking:
BOSS on front case.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
BOSS Direct G4 PERMANENT FILLING/PRESSURISATION DEVICE

Approval Holder:
BSS Industrial
Company Name
BSS Industrial
Address
Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2205095

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure: See models Maximum working temperature 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2205095
Size:
See Models
Marking:
Stuart Turner, CE, Max Temperature and other Technical info on Data Plates
Installation Requirements:
R001 R415
Expiry date:
31/05/2027
Model:
VM(.) 1 >> Size from 2 to 39 stages VM(.) 3 >> Size from 2 to 33 stages VM(.) 5 >> Size from 2 to 27 stages VM(.) 10 >> Size from 2 to 23 stages VM(.) 15 >> Size from 1 to 17 stages VM(.) 20 >> Size from 1 to 16 stages VM(.) 32 >> Size from 1 to 14 stages VM(.) 45 >> Size from 1 to 13 stages VM(.) 64 >> Size from 1 to 8 stages VM(.) 90 >> Size from 1 to 6 stages ( ) = VM >> AISI304 Components (L) = VM >> AISI316L Components (K*) = VM>> AISI304 + PRESSURE SENSOR (LK*) = VM >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F VM(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 VM(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. VM(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. VM(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. VM(.) 32 >> Available with Loose round flange DN65. VM(.) 45 >> Available with Loose round flange DN80. VM(.) 64-90 >> Available with Loose round flange DN100. Model Bar VM( )1 2 16 VM( )1 3 16 VM( )1 4 16 VM( )1 5 16 VM( )1 6 16 VM( )1 7 16 VM( )1 8 16 VM( )1 9 16 VM( )1 10 16 VM( )1 11 16 VM( )1 12 16 VM()1 13 16 VM(L)1 14 16 VM( )1 16 16 VM( )1 18 16 VM( )1 20 16 VM( )1 22 16 VM( )1 24 16 VM( )1 26 16 VM( )1 27 25 VM( )1 29 25 VM( )1 32 25 VM( )1 34 25 VM( )1( 37 25 VM( )1 39 25 VM( )3 2 16 VM( )3 3 16 VM( )3 4 16 VM( )3 5 16 VM( )3 6 16 VM( )3 7 16 VM( )3 8 16 VM( )3 9 16 VM( )3 10 16 VM( )3 11 16 VM( )3 12 16 VM( )3 13 16 VM( )3 14 16 VM( )3 15 16 VM( )3 16 16 VM( )3 17 16 VM( )3 19 16 VM( )3 21 16 VM( )3 23 25 VM( )3 25 25 VM( )3 27 25 VM( )3 29 25 VM( )3 31 25 VM( )3 33 25 VM( )5 2 16 VM( )5 3 16 VM( )5 4 16 VM( )5 5 16 VM( )5 6 16 VM( )5 7 16 VM( )5 8 16 VM( )5 9 16 VM( )5 10 16 VM( )5 11 16 VM( )5 12 16 VM( )5 13 16 VM( )5 14 16 VM( )5 15 16 VM( )5 17 16 VM( )5 19 25 VM( )5 20 25 VM( )5 23 25 VM( )5 25 25 VM( )5 27 25 VM( )10 2 16 VM( )10 3 16 VM( )10 4 16 VM( )10 5 16 VM( )10 6 16 VM( )10 7 16 VM( )10 8 16 VM( )10 9 16 VM( )10 10 16 VM( )10 11 16 VM( )10 12 16 VM( )10 14 16 VM( )10 15 16 VM( )10 16 25 VM( )10 18 25 VM( )10 19 25 VM( )10 21 25 VM(L)10 22 25 VM( )10 23 25 VM( )15 1 16 VM( )15 2 16 VM( )15 3 16 VM( )15 4 16 VM( )15 5 16 VM( )15 6 16 VM( )15 7 16 VM( )15 8 16 VM( )15 9 16 VM( )15 10 16 VM( )15 11 16 VM( )15 12 25 VM( )15 13 25 VM( )15 15 25 VM( )15 17 25 VM()20 1 16 VM( L)20 2 16 VM( )20 3 16 VM( )20 4 16 VM( )20 5 16 VM( )20 6 16 VM( )20 7 16 VM( )20 8 16 VM( )20 9 16 VM( )20 10 25 VM( )20 11 25 VM( )20 12 25 VM( )20 13 25 VM( )20 14 25 VM( )20 15 25 VM( )20 16 25 VM( )32 1-1 16EVMS( )32 1-0 16 VM( )32 2-2 16 VM( )32 2-0 16 VM( )32 3-2 16 VM( )32 3-0 16 VM( )32 4-2 16 VM( )32 4-0 16 VM( )32 5-2 16 VM( )32 5-0 16 VM( )32 6-2 16 VM( )32 6-0 16 VM( )32 7-2 16 VM( )32 7-0 16 VM( )32 8-2 25 VM( )32 8-0 25 VM( )32 9-2 25 VM( )32 9-1 25 VM( )32 10-2 25 VM( )32 10-0 25 VM( )32 11-2 25 VM( )32 11-1 25 VM(L)32 12-2 30 VM(L)32 12-0 30 VM( )32 13-2 30 VM( )32 13-0 30 VM( )32 14-2 30 VM( )32 14-0 30 VM( )45 1-1 16 VM( )45 1-0 16 VM( )45 2-2 16 VM( )45 2-0 16 VM( )45 3-2 16 VM( )45 3-0 16 VM( )45 4-2 16 VM( )45 4-0 16 VM( )45 5-2 16 VM( )45 5-0 16 VM( )45 6-2 25 VM( )45 6-0 25 VM( )45 7-2 25 VM( )45 7-0 25 VM( )45 8-2 25 VM( )45 8-0 25 VM( )45 9-2 25 VM( )45 9-0 25 VM( )45 10-2 35 VM( )45 10-0 35 VM( )45 11-2 35 VM( )45 11-0 35 VM( )45 12-2 35 VM( )45 12-0 35 VM( )45 13-2 35 VM( )64 1-1 16 VM( )64 1-0 16 VM( )64 2-2 16 VM( )64 2-1 16 VM( )64 2-0 16 VM( )64 3-2 16 VM( )64 3-1 16 VM( )64 3-0 16 VM( )64 4-2 16 VM( )64 4-1 16 VM( )64 4-0 16 VM( )64 5-2 16 VM( )64 5-1 16 VM( )64 5-0 16 VM( )64 6-2 25 VM( )64 6-1 25 VM( )64 6-0 25 VM( )64 7-2 25 VM( )64 7-1 25 VM( )64 7-0 25 VM( )64 8-2 25 VM( )64 8-1 25 VM( )90 1-1 16 VM( )90 1-0 16 VM( )90 2-2 16 VM(L)90 2-0 16 VM(L)90 3-2 16 VM(L)90 3-0 16 VM(L)90 4-2 16 VM( )90 4-0 16 VM( )90 5-2 25 VM( )90 5-0 25 VM( )90 6-2 25 VM( )90 6-0 25

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#2207068

Range of shower handsets with chrome plated ABS bodies incorporating NBR o rings. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2207068
Size:
½” BSP (M)
Marking:
Elisa on shower face
Installation Requirements:
R001 R040
Expiry date:
31/07/2027
Model:
706074 – Elisa Vita Handset (Chrome) 706225 – Elisa Vita Handset (Matt Black) 706221 – Elsia Vita Handset (Brushed Brass)

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 875 of 2219

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.