‘MasterProtect® 180’. Site applied, grey coloured, two-component epoxy coating consisting of Part A (grey coloured liquid) and Part B (colourless liquid). Mix Part A and Part B in a mass ratio of 87:13 and apply as per manufacturer's TDS 'MBS_CC-UAE/Pr_180/ /03_23'. Cure coat 1 for 36 hours@20°C. Cure coat 2 for 21 days@20°C. For use with water up to 40°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2303536

Expiry date:

31/03/2028

Approval Holder:

Master Builders Solutions Construction Chemicals LLC

Company Name

Master Builders Solutions Construction Chemicals LLC

Address

PO Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Maxline 100 Potable Water Coating Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDSMLI100.rv5.04042023'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205574

Expiry date:

31/05/2027

Approval Holder:

Maxkote Ltd.

Company Name

Maxkote Ltd.

Address

Clifton Moor, York

Postcode

YO30 4XL

Phone

+44 1904 809 773

General Email

info@maxkote.co.uk

View All Listings by this Company

'Thoenes BA120'. Blue coloured fibre/NBR material manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2010577

Expiry date:

31/10/2025

Approval Holder:

Thoenes Dichtungstechnik GmbH

Company Name

Thoenes Dichtungstechnik GmbH

Address

Zeppelinstrabe 1, D-01665 Klipphausen

Country

Germany

View All Listings by this Company

'Thoenes BA110'. Green coloured NBR/fibre material manufactured by calendering. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2010578

Expiry date:

31/10/2025

Approval Holder:

Thoenes Dichtungstechnik GmbH

Company Name

Thoenes Dichtungstechnik GmbH

Address

Zeppelinstrabe 1, D-01665 Klipphausen

Country

Germany

View All Listings by this Company

'SHUANGSHI GRP PIPE 51160'. Yellow coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2303521

Expiry date:

31/03/2028

Approval Holder:

Jiangxi Shuangshi Technology Co., Ltd.

Company Name

Jiangxi Shuangshi Technology Co., Ltd.

Address

North Zone, Shangyou Industrial Park, Huangbu Town, Shangyou County, Ganzhou City, Jiangxi Province

Country

China

View All Listings by this Company