Directory Search Results

Print List

#250302008

Range of wall mounted, manually operated blending valves with brass bodies (various finishes) and ceramic cartridge headworks controlling both the flow and temperature with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250302008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Needs to get installed in combination with Rapido Smart Box 35.600.
Size:
Only to be used with compatible Grohe products.
Marking:
Grohe SPA logo on rosette or Grohe logo on operating member. Models 24.259, 24.277 and 24.354 include the new Grohe SPA Logo, all other models include standard Grohe Logo.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
24.259.xxx 24.277.xxx 24.354.xxx 24.071.xxx 24.069.xxx 24.065.xx3 24.067.xxx 24.063xx1 24.061.xxx 24.059.xx3 24.057.xx1 24.055.xx2 24.053.xx1 24.051.xx2 24.046.xx3 24.048.xx3 24.044.xxx 24.042.xx2 Where xxx / xx1 / xx2 / xx3 denotes finish, can be replaced by: 000 / 001 / 002 / 003– Chrome DC0 / DC1 / DC2 / DC3 – Supersteel DA0 / DA1 / DA2 / DA3 – Warm sunset AL0 / AL1 / AL2 / AL3 – Brushed hard graphite GL0 / GL1 / GL2 / GL3 – cool sunrise IG0 / IG1 / IG2 / IG3 – chrome/gold
Product Images

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#250203004

Range of thermostatic bar shower mixers, incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type of operating member. The temperature is controlled independently via a thermostatic mixing cartridge incorporating a manual override button. Inlets incorporate single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower hose, handset and a riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250203004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” x ½” off set unions
Marking:
‘Center’ logo (brand of Wolseley) on Body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2030
Model:
D01196

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#250203005

Range of thermostatic bar shower mixers, (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with a dome type operating member. Temperature is controlled independently via a thermostatic mixing cartridge with a dome type operating member that incorporates a manual override button. The Inlets incorporate stainless steel strainer washers and approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250203005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
‘Nabis’ logo (brand of Wolseley) on Body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2030
Model:
D01197

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#250104010

Range of wall mounted concealed, shower valves (brass bodies – various plated trim sets) incorporating a ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250104010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with a shower hose, handset, riser rail or spout outlet. Product to be used in combination with 01700180 AXOR iBox universal Basic set or 01400180 AXOR iBox universal 2 Basic set + 13588000 Adapter plate for iBox universal 2.
Size:
¾” BSP (F)
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
46450xx0 46451xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250302013

Range of wall mounted, concealed, digitally controlled thermostatic blending valve with a 1, 2 or 3 outlets, incorporating a plastic body, the flow and temperature is controlled via a digital user interface. Products incorporate a built-in pump and a solenoid valve. Maximum working pressure 1.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm spigot connection
Marking:
Aqualisa logo, pressure, temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R040
Expiry date:
31/03/2029
Model:
705758 705759 705760 Models added July 2025 1013928 1013929 1001269 1001271 1001273
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250302017

Wall mounted, bar type thermostatic blending valve, (brass bodies - various finishes), incorporating a half turn ceramic disc for manually diverting the flow between the shower handset, on off position, and the overhead shower with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button with a dome type operating member. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) x ½” BSP (M) offset unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
27 633 xx0. Models added April 2025: 24592xx0, 24593xx0. Models added July 2025: 48 794 xx0 & 48 795 xx0. Model added September 2025: 24 594 xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250108016

Range of butterfly valves with black epoxy coated ductile iron bodies & aluminium bronze discs. The closing mechanism can be controlled by lever or handwheel (via gearbox). Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
250108016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
F621- DN50-200, F622: DN50-300. F624 DN50-150, F625 DN50-300, DM925LW DN65-150.
Marking:
Crane, model, WRAS, temp 80°C, temperature rating, PN, BS EN 593 & year of manufacture (YYYY) on ID plate on body. Size on body and disc. Crane on lever.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
Crane F621: Lever Operated semi-lugged Butterfly Valve. Crane F622: Gearbox Operated semi-lugged Butterfly Valve. Crane F624: Lever Operated fully lugged Butterfly Valve. Crane F625: Gearbox Operated fully lugged Butterfly Valve. DM925LW – Lever operated double regulating butterfly valve fully lugged.
Product Images

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#250108017

Range of butterfly valves with black epoxy coated ductile iron bodies & aluminium bronze discs. The closing mechanism can be controlled by lever or handwheel (via gearbox). Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
250108017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
950W- DN50-200 950WG - DN50-300 970W - DN50-150 970WG - DN50-300 973W DN65-150
Marking:
Hattersley, model, WRAS, temp 80°C, temperature rating, PN, BS EN 593 & year of manufacture (YYYY) on ID plate on body. Size on body and disc. Hattersley on lever.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
950W: Lever Operated semi-lugged Butterfly Valve. 950WG: Gearbox Operated semi-lugged Butterfly Valve. 970W: Lever Operated fully lugged Butterfly Valve. 970WG: Gearbox Operated fully lugged Butterfly Valve. 973W: Lever operated double regulating butterfly valve fully lugged.

Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#2310174

Range of lever operated butterfly valves with blue epoxy coated cast iron bodies, stainless steel discs and EPDM ‘O’ rings and seals. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2310174
Size:
DN50 – DN300
Marking:
Winners logo on dataplate on body PN and size on body
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
WNSD71X

Approval Holder:
Tongling Winners Flow Technology CO., Ltd
Company Name
Tongling Winners Flow Technology CO., Ltd
Address
NO 4688 Qifeng Road

View All Listings by this Company

Print This Approval


#250302009

Range of eccentric lugged or wafer type butterfly valves with stainless teel or blue epoxy coated bodies and stainless steel or epoxy coated ductile iron discs, incorporating EPDM or PTFE seats (see models). Max working pressure: 10.0 Bar, 16.0 Bar or 20.0 Bar (see models). Max operating temperature 80°C or 99°C (see models).

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
250302009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Models 301-371X-125LB Wafer Type & 302-371X-125LB Lug type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’, 12’’, 14’’, 16’’, 18", 20" & 24" Models: 811-372F-150LB Wafer Type & 812-372F-150LB Lug Type: 2", 2.5", 3’’, 4’’, 5’’, 6’’, 8’’, 10’’ & 12” Lug type connections Model: D342X-16Q: DN200, DN300, DN400, DN500, DN600, DN800, DN1000 & DN1200 Flange connections
Marking:
EMV, PN, temperature and other technical information on data plate on body. Shanghai Ever Mark Valves logo, flow arrow and size cast on body. Note Flow Arrow is only present on models 811-372F-150LB & 812-372F-150LB.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
301-371X-125LB Wafer type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 302-371X-125LB Lug type, Stainless steel discs with EPDM seats, 16.0 Bar (Size 2” to 12”) or 10.0 Bar (Size 14” to 24”), 80°C Max Temp. 811-372F-150LB Wafer type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C 812-372F-150LB Lug type, Stainless steel discs with PTFE seats, 20.0 Bar, 99°C D342X-16Q. Eccentric flanged type, Epoxy coated ductile iron discs and stainless steel seats, 16.0 Bar, 80°C
Product Images

Manufacturer:
Shanghai Ever Mark Valves Co., LTD
Company Name
Shanghai Ever Mark Valves Co., LTD
Address
No.88 Jinle Road, Bao Shan District, Shanghai, China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 859 of 1013

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.