Directory Search Results

Print List

#240555027

'TEC S27 R.-60 rosso 'O'-rings' & Gaskets. Red coloured, injection moulded silicone rubber 'O'-rings & gaskets. Shore hardness 60. Tested in-radii sizes between 0.5mm & 2.67mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
240555027
Expiry date:
31/05/2029

Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#240455050

`Loctite 587`. Blue coloured silicone sealant. Apply as per manufacturer`s TDS dated November 2004. Cure for 7 days at 7°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5500 Sealants - Flat Faced Joints
Section Subtitle:
Silicone.
WRAS Approval Number:
240455050
Expiry date:
30/04/2029

Approval Holder:
Henkel Loctite (China) Co., Ltd.
Company Name
Henkel Loctite (China) Co., Ltd.
Address
928 Zhangheng Road, Pudong, Shanghai, 201203
Country
China

View All Listings by this Company

Print This Approval


#240502016

Range of single-hole, single outlet (fixed) electronically operated, tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by a touch sensor. The spout outlets incorporate plastic aerators. Max working pressure 8.0 bar. Max operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240502016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided PEX lined flexible hose assembly incorporating a 10mm spigot end connection.
Marking:
Stern logo on tap cover.
Installation Requirements:
R001 R006 R009
Expiry date:
31/05/2029
Model:
225100 - Touch B 225200 - Touch E
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240402073

Range of single hole, single outlet electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240402073
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Dudley on body.
Installation Requirements:
R001 R006 R009
Expiry date:
30/04/2029
Model:
Electroflo Arc Battery Electroflo Arc Mains

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#240502717

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, bottom or side entry type with brass ½’’ or ¾” BSP inlet. The inlet incorporates a strainer, models incorporate a delay fill function. The bottom entry valves are height adjustable. Maximum working pressure - 10 Bar, Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240502717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models.
Marking:
Viva, BS1212-4 and Datum level on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
31/05/2029
Model:
SKYAIR01 with ½” BSP (M) SKYAIR02 with ½” BSP (M) SKYAIR03 with ¾” BSP (M) SKYAIR04 with ¾” BSP (M)
Product Images

Approval Holder:
Mercantile Ventures Ltd ta Viva Sanitary
Company Name
Mercantile Ventures Ltd ta Viva Sanitary
Address
Units 1-3 Capitol Trading Park Liverpool
Postcode
L33 7SY
Country
United Kingdom
General Email
allan.hanson@vivasanitary.co.uk

View All Listings by this Company

Print This Approval


#2209072

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209072
Marking:
MF, WRAS, , size, PN, flow arrow and CR on body.
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
M37040000DZR ½” BSP (F) inlet/outlet M37060000DZR ¾” BSP (F) inlet/outlet M37080000DZR 1” BSP (F) inlet/outlet M37100000DZR 1.1/4" BSP (F) inlet/outlet M37120000DZR 1½” BSP (F) inlet/outlet M37160000DZR 2” BSP (F) inlet/outlet

Approval Holder:
Masterflow Products Limited
Company Name
Masterflow Products Limited
Address
Globall House 95 Vantage Point West Mindlands
Postcode
DY6 7FT
Country
United Kingdom

View All Listings by this Company

Print This Approval


#240603002

Range of single-hole, single outlet, fixed combination tap assemblies, (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240603002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
BRISTAN on the body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2029
Model:
NAX BAS C RP3 NAX BAS C
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240603004

Single-hole, single outlet, fixed, combination tap assembly (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a click type pop-up waste (verified by test) Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240603004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
BRISTAN on the body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2029
Model:
MIO ECOBAS C
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240602024

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240602024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2" BSP (F)captive nut end connections
Marking:
Huanri on the body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2029
Model:
4001CE2 (Chrome) 4001CE2EB (Electrophoresis Black) 4001CE3 (Chrome) 4001CE3EB (Electrophoresis Black) 4006HG2 (Chrome) 4006HG2EB (Electrophoresis Black)
Product Images

Approval Holder:
Zhejiang Huanri Sanitation Co., Ltd.
Company Name
Zhejiang Huanri Sanitation Co., Ltd.
Address
Xuanmen Industrial Zone, Lupu Town, Yuhuan County
Country
Zhejiang Province,
Phone
+86(0) 576 8710 6830

View All Listings by this Company
Manufacturer:
Zhejiang Huanri Sanitation Co., Ltd.
Company Name
Zhejiang Huanri Sanitation Co., Ltd.
Address
Xuanmen Industrial Zone, Lupu Town, Yuhuan County
Country
Zhejiang Province,
Phone
+86(0) 576 8710 6830

View All Listings by this Company

Print This Approval


#240604014

Single hole, single outlet (fixed) combination tap assembies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240604014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.
Marking:
Hansgrohe on body or operating member.
Installation Requirements:
R001 R008 R010 R006
Expiry date:
30/06/2029
Model:
73 311 xx0 hansgrohe Tecturis S Single lever basin mixer 110 without waste set 73 312 xx0 hansgrohe Tecturis S Single lever basin mixer 110 CoolStart without waste set 73 313 xx0 hansgrohe Tecturis S Pillar tap 80 with lever handle for cold water or pre-adjusted water without waste set 73 314 xx0 hansgrohe Tecturis S Single lever basin mixer 110 CoolStart with pop-up waste set 73 320 xx0 hansgrohe Tecturis SSingle lever basin mixer 110 Fine CoolStart with push-open waste set 73 321 xx0 hansgrohe Tecturis S Single lever basin mixer 110 Fine CoolStart without waste set 73 323 xx0 hansgrohe Tecturis S Single lever basin mixer 110 Fine CoolStart with pop up-waste set 73 340 xx0 hansgrohe Tecturis S Single lever basin mixer 150 Fine CoolStart with push-open waste set 73 341 xx0 hansgrohe Tecturis S Single lever basin mixer 150 Fine CoolStart without waste set 73 370 xx0 hansgrohe Tecturis S Single lever basin mixer 240 Fine CoolStart for wash bowls with push-open waste set 73 372 xx0 hansgrohe Tecturis S Single lever basin mixer 240 Fine CoolStart for wash bowls without waste set 73 301 xx0 hansgrohe Tecturis S Single lever basin mixer 80 CoolStart EcoSmart+ without waste set 73 302 xx0 hansgrohe Tecturis S Single lever basin mixer 80 CoolStart EcoSmart+ with pop-up waste set 73 001 xx0 hansgrohe Tecturis E Single lever basin mixer 80 Cool Start EcoSmart+ without waste set 73 002 xx0 hansgrohe Tecturis E Single lever basin mixer 80 CoolStart EcoSmart+ with pop-up waste set 73 010 xx0 hansgrohe Tecturis E Single lever basin mixer 110 EcoSmart+ with pop-up waste set 73 011 xx0 hansgrohe Tecturis E Single lever basin mixer 110 EcoSmart+ without waste set 73 012 xx0 hansgrohe Tecturis E Single lever basin mixer 110 CoolStart EcoSmart+ without waste set 73 013 xx0 hansgrohe Tecturis E Pillar tap 80 EcoSmart+ with lever handle for cold water or pre-adjusted water without waste set 73 014 xx0 hansgrohe Tecturis E Single lever basin mixer 110 CoolStart EcoSmart+ with pop-up waste set 73 020 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with push-open waste set 73 021 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with push-open waste set 73 023 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with pop up-waste set 73 040 xx0 hansgrohe Tecturis E Single lever basin mixer 150 Fine CoolStart EcoSmart+ with push-open waste set 73 041 xx0 hansgrohe Tecturis E Single lever basin mixer 150 Fine CoolStart EcoSmart+ without waste set 73 070 xx0 hansgrohe Tecturis E Single lever basin mixer 240 Fine CoolStart EcoSmart+ for wash bowls with push-open waste set 73 072 xx0 hansgrohe Tecturis E Single lever basin mixer 240 Fine CoolStart EcoSmart+ for wash bowls without waste set 73 310 xx0 hansgrohe Tecturis S Single lever basin mixer 110 EcoSmart+ with pop up waste set Additional information. (list any further information regarding the product or range, e.g.: key for model code, prefix/suffixes describing finishes, variants of operating member, etc.) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 851 of 1109

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.