2KPS EASF-V grey & 2KPS EASF-V Fading Blue. Site applied, two part, grey coloured anchor resins. 2KPS EASF-V grey is grey coloured when mixed and consists of Part A (shiny white liquid) & Part B (shiny black liquid). Mix, apply and cure 2KPS EASF-V grey as per manufacturer’s product information sheet 'EASF-V / VC / VE (EU07) V4.0'. 2KPS EASF-V grey is for use with water up to 60°C. 2KPS EASF-V Fading Blue is blue coloured when mixed. Mix and apply as per manufacturer’s product information sheet 'EASF-V / VC / VE (EU07) V4.01'. Cure for 145 minutes@5°C. 2KPS EASF-V Fading Blue is for use with water up to 23°C. Please note that the 2KPS EASF-V Fading Blue is approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:

5311 Resin Anchors

Expiry date:

30/06/2025

Approval Holder:

2K Polymer Systems Ltd.

Company Name

2K Polymer Systems Ltd.

Address

Venture Crescent, Alfreton, Derbyshire

Postcode

DE55 7RA

Phone

+44 (0) 1773 527 333

General Email

info@2kps.net

View All Listings by this Company

'E2514'. Black coloured, compression moulded EPDM rubber. Shore hardness 67. Tested in-radius size 1.03mm. For use with water up to 60°C,

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2205545

Expiry date:

31/05/2027

Approval Holder:

Semperit Technische Produkte GmbH

Company Name

Semperit Technische Produkte GmbH

Address

Triester Bundesstrasse 26, A-2632 Wimpassing im Schwarzatale

Country

Austria

Phone

+43 2630 310 0 Fax: +43 2630 475

General Email

office@semperit.at

View All Listings by this Company

‘PK-HM 8 natural (6145) & PK-VM 8 natural (6146)’. Natural (appear beige in colour), injection moulded polyketone materials. For use with water up to 85°C.

Section:

5585 Thermoplastic Moulding Compound

Expiry date:

30/09/2027

Approval Holder:

Akro Plastic GmbH

Company Name

Akro Plastic GmbH

Address

Industriegebiet Bronhital-Ost Im Stiefelfeld 1 56651 Niederzissen

Country

Germany

Phone

+49 2636 9742 0 +49 2636 9742 0 +49 2636 9742 0

General Email

info@akro-plastic.com

View All Listings by this Company

Wall mounted infra-red single hole, single outlet electronically controlled combination tap assemblies with brass body (chrome plated), incorporating a solenoid valve controlling the flow. The spout outlets incorporate a plastic aerator.Stainless steel strainer on inlet Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

2205350

Size:

½” BSP (M)

Marking:

Metlex (Brand of Croydex) on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

TB 330141 electronically controlled combination tap assemblies

Approval Holder:

Croydex DBA Metlex

Company Name

Croydex DBA Metlex

Address

Central Way Andover Hampshire

Postcode

SP10 5AW

View All Listings by this Company

Range of aerators with plastic bodies and filter screens. Maximum operating temperature 60°C

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

2211706

Size:

Please refer to model

Marking:

Solex on body

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

T10110 - Ф18.1×10.1 T10128 - Ф20.85×14.26 T10129 - Ф20.85×14.26 T10344 - Ф20.85×15.44 T10345 - Ф20.85×15.44 T10346 - Ф20.85×15.44 T10347 - Ф20.85×15.44 T10350 - M24*1×15.94 T10351 - M24*1×15.94 T10352 - M24*1×15.94 T10353 - M24*1×15.94 T10356 - M24*1×12.5 T10616 - M14*1×11.5 T10617 - M14*1×11.5 T10613 - M14*1×11.5 T10430 - Ф15×13 T10431 - Ф15×13 T10423 - Ф18.1×10 T10420 - Ф18.1×10.2 T10424 - Ф18.1×10.2 T10359 - M24*1×9.5 T10361 - Ф20.85×21.6

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company