Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0470 : Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number: #251204002

Single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a quarter turn ceramic disc headworks and single lever operating members, with a pull out spray retained within a holster. The spout outlet incorporates a plastic aerator and the spout incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 251204002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:: DEVA (brand of Methven) on front of body. DTC, 25 (brand of Methven) on rear of body.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030
Model:: ABN104 BRG104

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #260204001

Range of single hole, single outlet, (swivel) combination tap assemblies, (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 260204001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined hose assembies incorporating ½” captive nut end connections.
Marking:: DEVA on front of body. DTC, 25 on rear of body for PTN104.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031
Model:: WTN104 MAL104 PTN104

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #250608017

Single hole, single outlet (swivel) combination tap assembly with a brass body (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 250608017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: PET braided HDPE lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:: Dolphin Solutions Ltd logo on rear of body.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/06/2030
Model:: DB2100.a.bbb. Where ‘aaa’ denotes the additional external surface finish (which is a non-water contact area) when applied. It can be one, two or three digits, which can be any combination of numbers and/or letters. As examples: ‘PVD’ or ‘.5’ to denote a PVD finish has been applied, ‘PC’ to denote a powder coat has been applied or alternatively .5. Examples of coatings include but is not limited to PVD, powder coating and ceramic coating. Where ‘yy’ denotes the external surface colour (which is a non-water contact area) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish. Also note the ‘-‘can be replaced/interchanged with a ‘.’ in the SKU – example DBS.xxx.yy.

Approval Holder:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #250608020

Single hole, single outlet (swivel) combination tap assembly (plated brass), incorporating ceramic cartridge headwork with dome type operating member, located at the end of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 250608020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined flexible hose assemblies with ¾” BSP captive nut end connection.
Marking:: Vado logo etched on mixer body.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/06/2030
Model:: CAM-150-XXX. Suffixes that replace XXX to denote colour finish: MB - Matt Black, MW - Matt White, SBR - Satin Brass, CP or C/P - Chrome.

Approval Holder:: VADO

Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar Somerset
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

WRAS Approval Number: #2311922

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 2311922
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:: WIX on rear of body.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2028
Model:: 232776 Zores Monobloc Sink Mixer - Chrome 232775 Zores Monobloc Sink Mixer - Brushed Nickle 232774 Zores Monobloc Sink Mixer - Antique Brass 173898 Contemporary Monobloc Sink Mixer - Chrome 173902 Contemporary Monobloc Sink Mixer - Brushed Nickle 180982 Toba Dual Lever Tap - Chrome 170428 Toba Mono Mixer - Brushed Nickle 313086 Toba Mono Mixer - Brushed Brass. 311144 Toba Monobloc Kitchen Mixer - Chrome 311148 Toba Monobloc Kitchen Mixer - Brushed Nickle 180981 Cosa Mono Mixer - Chrome 311143 Cosa Monoblock Kitchen Mixer Tap - Chrome 223122 Kumai Tap - Matt Black 223123 Kumai Tap - Brushed Gold

Approval Holder:: Wickes PLC

Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company