`Novapress 260`. Green coloured, compressed fibre material (bound with NBR), manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2110513

Expiry date:

31/10/2026

Approval Holder:

Frenzelit GmbH

Company Name

Frenzelit GmbH

Address

Frankenhammer, 95460 Bad Berneck

Country

Germany

Phone

Tel: 0049 9273 720 Fax: 0049 9273-222

View All Listings by this Company

`Ruby Veg Soft Soap/EasyJoint Uni`. Translucent, amber coloured, soya oil lubricant. Apply as per manufacturer's technical datasheet 'revision 2' dated '22/09/21'. For use with water up to 23°C.

Section:

5160 Lubricants

Expiry date:

30/09/2026

Approval Holder:

Delf (UK) Ltd.

Company Name

Delf (UK) Ltd.

Address

Unit 2 Hickmans Road, Birkenhead, Merseyside

Postcode

CH41 1JH

View All Listings by this Company

'LATAMID 66 H2 G/30 BLACK F:3352'. Black coloured, injection moulded PA66 material. For use with water up to 65°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2105523

Expiry date:

31/05/2026

Approval Holder:

Lati Industria Termoplastici Spa

Company Name

Lati Industria Termoplastici Spa

Address

Via Francesco Baracca, 7 - 21040 Vedano Olona VA

Country

Italy

Phone

+39 0332 409111

General Email

info@lati.com

View All Listings by this Company

'CELANYL A2 WR GF30 NC 1102/2A & CELANYL A2 WR GF30 NC 1102/2B'. Off-white, injection moulded nylon materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2109534

Expiry date:

30/09/2026

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company

'POLYPOL-1052'. Pale yellow/beige coloured, isophthalic unsaturated polyester resin material. For use with water up to 50°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2112503

Expiry date:

31/12/2026

Approval Holder:

Polychem Resins International Industries LLC

Company Name

Polychem Resins International Industries LLC

Address

PO Box 37029, Jebel Ali Industrial Area, Phase-1, Dubai

Country

United Arab Emirates

View All Listings by this Company

'VICTREX' injection moulded PEEK thermoplastic materials. For use with water up to 85°C. VICTREX PEEK 450GL30, 450G, 450FE20 (natural – appears beige coloured), 450FC30, 450CA30 & 90GL30BLK-EU (black coloured). VICTREX FG™100, FG™120, FG™200, FG™220, FG™300 & FG™ 325 (natural – appears beige coloured). VICTREX FG™101, FG™121, FG™140, FG™201, FG™221, FG™240, FG™301 & FG™320 (black coloured). VICTREX FG™340 (dark grey coloured).

Section:

5220 Polyether Ether Ketone

Expiry date:

30/09/2026

Approval Holder:

Victrex Manufacturing Ltd./VICTREX Plc.

Company Name

Victrex Manufacturing Ltd./VICTREX Plc.

Address

Victrex Technology Centre Hillhouse International Thornton Cleveleys

Postcode

FY5 4QA

Country

Lancashire

Phone

01253 897700 Fax: 01253 897701

View All Listings by this Company

'Lucite Diakon ST25G8 Clear 0003'. Colourless, injection moulded PMMA material. For use with water up to 23°C.

Section:

5223 Polymethyl Methacrylate

Section Subtitle:

Material only.

WRAS Approval Number:

2108532

Expiry date:

31/08/2026

Approval Holder:

Mitsubishi Chemical UK

Company Name

Mitsubishi Chemical UK

Address

E212, The Wilton Centre Wilton Redcar

Postcode

TS10 4RF

Country

United Kingdom

View All Listings by this Company

'AO Roto Water Tank Panel'. White coloured, LLDPE tank panel manufactured by rotational moulding. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2109517

Expiry date:

30/09/2026

Approval Holder:

Amiantit Oman Company LLC

Company Name

Amiantit Oman Company LLC

Address

Post Box 417, PC 111, Near Al Rusayl Hotel, Muscat

Country

Sultanate of Oman

View All Listings by this Company

'Revolve N-525 Boat Blue M2-018D'. Blue coloured polyethylene material manufactured by rotational moulding. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2109515

Expiry date:

30/09/2026

Approval Holder:

Matrix Polymers Ltd.

Company Name

Matrix Polymers Ltd.

Address

Unit 2, Spindus Road, Compass Industrial Park, Speke, Liverpool

Postcode

L24 1YA

Phone

+44 (0) 604 641640 Fax: 01604 497744

General Email

sales@matrixpolymers.com

View All Listings by this Company

'Total 4041 Blue Polyethylene & Total 4041 Black Polyethylene'. Blue or black coloured, polyethylene material manufactured by rotational moulding. For use with water up to 65°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2109522

Expiry date:

30/09/2026

Approval Holder:

Reduction Plastics Ltd

Company Name

Reduction Plastics Ltd

Address

11-12 Silverwood Plastics Ltd 70 Silverwood Road Craigavon

Postcode

BT66 6LN

Phone

+44 (0) 2838 345 577

View All Listings by this Company