'Hydradry Tanking slurry'. Site applied, grey coloured, cementitious tanking slurry supplied in powder form. Mix powder:water in a mass ratio of 3.85:1 and apply as per manufacturer's datasheet 'issue 5 - MC0320'. Cure for 7 days and 4 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201519

Expiry date:

31/01/2027

Approval Holder:

Mapei (UK) Limited

Company Name

Mapei (UK) Limited

Address

Mapei House Steel Park Road, Halesowen, West Midlands

Postcode

B62 8HD

View All Listings by this Company

'LATTYflon 4789'. Yellow coloured, braided fibre/PTFE gland packing. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2202548

Expiry date:

28/02/2027

Approval Holder:

LATTY International S.A.

Company Name

LATTY International S.A.

Address

1, Rue Xavier Latty, Brou

Postcode

28160

Country

France

Phone

+33 (0) 2 37 44 77 77

General Email

m.adjemout@latty.com

View All Listings by this Company

'Tecomid NB40 GR30 NL HC QW'. Off-white coloured (translucent), injection moulded PA6 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2202518

Expiry date:

28/02/2027

Approval Holder:

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Company Name

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Address

Karamehmet Mah. Avrupa Serbest Bolgesi, Avrasya Bulvari No: 8, TR 59930 Ergene

Country

Turkey

View All Listings by this Company

'Omnix DW 4050 BK 001'. Black coloured, injection moulded PA material (manufactured in Oudenaarde, BE and Changshu, China). For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2201530

Expiry date:

31/01/2027

Approval Holder:

Syensqo Specialty Polymers USA, LLC

Company Name

Syensqo Specialty Polymers USA, LLC

Address

4500 McGinnis Ferry Road, Alpharetta, Georgia 30005

Country

United States

View All Listings by this Company

'4MID 9B22130 W-A BNL100'. Off-white coloured (translucent), injection moulded PA6 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2202528

Expiry date:

28/02/2027

Approval Holder:

4Plas Ltd.

Company Name

4Plas Ltd.

Address

7 Aldin Way, Hinckley, Leicestershire

Postcode

LE10 0GE

View All Listings by this Company

'Genestar™ G1500D-L47WF BLACK'. Black coloured, injection moulded or extruded Polyamide 9T material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2202539

Expiry date:

28/02/2027

Approval Holder:

Kuraray Co.,Ltd.

Company Name

Kuraray Co.,Ltd.

Address

Tokiwabashi Tower, 2-6-4, Otemachi, Chiyoda-ku, Tokyo, 100-0004

Country

Japan

View All Listings by this Company

'Akoalit PB 4268 White & Akoalit PB 4267 Grey'. White or grey coloured, extruded polybutylene material. For use with water up to 85°C.

Section:

5200 Polybutylene

Expiry date:

31/03/2027

Approval Holder:

Basell Polyolefine GmbH

Company Name

Basell Polyolefine GmbH

Address

Industriepark Hochst, C657/R211 D-65926 Frankfurt

Country

Germany

View All Listings by this Company

'DBS0420-DBS0640'. Orange coloured HDPE ball float, manufactured by blow moulding. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2202513

Expiry date:

28/02/2027

Approval Holder:

Tricel (Weston)

Company Name

Tricel (Weston)

Address

Tricel ( Weston ) Winterstoke Road, Weston-Super-Mare, Somerset

Postcode

BS24 9AN

Phone

01934 421477

View All Listings by this Company

'NAFF ZPE PE40 LDPE'. Black coloured (with blue external stripes), extruded LDPE pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2111539

Expiry date:

30/11/2026

Approval Holder:

Netafim Netherlands

Company Name

Netafim Netherlands

Address

Nijverheidstraat 2, 4715 RZ, Rucphen

Country

Netherlands

View All Listings by this Company

'002DP48 Aiva Electrofusion Fittings'. Blue coloured, injection moulded HDPE electrofusion fittings. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2202520

Expiry date:

28/02/2027

Approval Holder:

M/s. Aiva Engineering Pvt. Ltd.

Company Name

M/s. Aiva Engineering Pvt. Ltd.

Address

39-10 Bahar Bungalow, Ground Floor Adarsh Nagar, Market Yard, Pune - 411037

Country

India

View All Listings by this Company