Range of push fit stop valves with white plastic bodies. Maximum working pressure/temperature: 10bar @ 20°C and 4 bar @ 60°C.

Section:

2336 Valves

Section Subtitle:

Stop valve(s) with plastic body

WRAS Approval Number:

240702022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For use with John Guest LLDPE Tubing which is not considered part of this approval. Pipes inserts must be used for the following LLDPE Tube sizes: 3/8” and 10mm and 12mm.

Size:

See models below

Marking:

John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.) on operating member and body, Size and PPMF on collet

Installation Requirements:

R001 R008

Expiry date:

31/07/2029

Model:

Speedfit x Speedfit: PPSV040808W: 1/4" - 1/4" Speedfit Shut Off Valve PPSV041212W: 3/8" - 3/8" Speedfit Shut Off Valve PPMSV040606W: 6mm - 6mm Speedfit Shut off Valve PPMSV040808W: 8mm - 8mm Speedfit Shut Off Valve PPMSV041010W: 10mm - 10mm Speedfit Shut off Valve PPMSV041212W: 12mm - 12mm Speedfit Shut Off Valve Speedfit x Male (NPTF Thread): PPSV010822W: 1/4" Speedfit x 1/4" nptf Shut Off Valve PPSV010822W-R: 1/4" Speedfit x 1/4" nptf Shut Off Valve PPSV011223W: 3/8" Speedfit x 3/8" nptf Shut Off Valve Speedfit x Female (NPTF Thread): PPSV451223W: 3/8" x 3/8" nptf Female Shut Off Valve Speedfit x Female (NPTF Thread): PPSV500822W: 1/4" Speedfit x 1/4" nptf Female Elbow Shut Off Valve PPSV501222W: 3/8" Speedfit x 1/4" nptf Female Elbow Shut Off Valve PPSV501222W-Y: 3/8" Speedfit x 1/4" nptf Female Elbow Shut Off Valve

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘Wall mounted, electronically operated tap assemblies (brass bodies - in various finishes). The flow is controlled by a solenoid valve that is actuated via an infra-red sensor on the spout. The spout outlet incorporates plastic aerators. Maximum working pressure 6 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240604031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

Dolphin logo on spout.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

DS101.bbb.d.ee DS102.bbb.d.ee DS103.bbb.d.ee DS104.bbb.d.ee ‘aaa’ denotes the style type, the following options are available: DS101 - 90° bent spout, DS102 - 90° bent spout with wall plate fixing kit, DS103 - 55° bent spout or DS104 - 55° bent spout with wall plate fixing kit. ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 107mm – 330mm. ‘d’ denotes the surface finish (which is a non-water contact part). It will always be 1 digit and either a letter or numbers. As examples: 1 = brushed satin stainless steel, 3 = PVD coated brushed satin stainless steel. ‘ee’ denotes the surface colour (which is a non-water contact part) where applicable. It will always be 2 digits, which can be any combination of numbers and/or letters. As examples: 01 = RAL9005 Black, 51 = PVD Gold finish Models may include an additional ‘.R’ suffix which denotes that the tap is supplied without the rosette, or an additional ‘fff’ suffix to denote a non-standard size Rosette (which is a non-water contact part) It will always be 2-3 digits, which can be any combination of numbers and/or letters

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of single hole, single outlet electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240402075

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

TSL on body.

Installation Requirements:

R001 R006 R009

Expiry date:

30/04/2029

Model:

L142

Approval Holder:

The Splash Lab UK

Company Name

The Splash Lab UK

Address

Unit 34 Meadow Industrial Estate Stockport

Postcode

SK1 2BU

Country

United Kingdom

View All Listings by this Company

Deck mounted single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve actuated via an infra-red sensor. Temperature is manually blended using a single lever operating member. The spout outlets incorporate plastic aerators. The inlets incorporate approved check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection and stainless-steel strainers. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240402077

Size:

Stainless steel braided, PEX lined flexible hoses incorporating 3/8" captive nut end connections.

Marking:

TSL on top of tap

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2029

Model:

L994

Approval Holder:

The Splash Lab UK

Company Name

The Splash Lab UK

Address

Unit 34 Meadow Industrial Estate Stockport

Postcode

SK1 2BU

Country

United Kingdom

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via infra-red sensor. Temperature is controlled independently via a thermostatic cartridge with a dome operating member which incorporates a manual override button. The spout outlets incorporate plastic aerators, and both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240702043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M) x 1/2" BSP (M) offset unions.

Marking:

Aquis on tap body.

Installation Requirements:

R001 R010 R040 R570

Expiry date:

31/07/2029

Model:

110.305.11 - W35, 110.306.11 - W35, 110.307.11 - W45, 110.308.11 - W45.

Approval Holder:

Aquis Systems AG

Company Name

Aquis Systems AG

Address

Balgacherstrasse 17 9445 Rebstein Switzerland

View All Listings by this Company

Manufacturer:

Aquis Systems AG

Company Name

Aquis Systems AG

Address

Balgacherstrasse 17 9445 Rebstein Switzerland

View All Listings by this Company