Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250304728

Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: ESCO International, model, size, pressure and product info on label.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 31/03/2030
Model:: ECO-05, ECO-10, ECO-20, ECO-30, ECO-45, ECO-60, ECO-85 ECO-20LCD, ECO-20LCD-P ECO-45LCD, ECO-45LCD-P ECO-60LCD, ECO-60LCD-P ECO-75LCD ECO-85LCD, ECO-85LCD-P EC0-100LCD, ECO-100LCD-P ECO-200LCD, EC200LCD-P EC1-20R-LCD, EC1-20R-LCD-P EC1-30R-LCD, EC1-30R-LCD-P EC1-40R-LCD, EC1-40R-LCD-P AML24R-LCD, AML24R-LCD-P AML50R-LCD, AML50R-LCD-P AML60R-LCD, AML60R-LCD-P AML96-P AML125-P AML160-P UV4IT, UV10IT, UV40IT, UV80IT EC400-1 (TS/ECO), EC400-2 (TS/ECO), EC400-3 (TS/ECO), EC400-4 (TS/ECO), EC400-5 (TS/ECO), EC400-6 (TS/ECO), EC400-8 (TS/ECO) SIZE: 1/8" 1/2"M 3/4"M 1"M 1 1/2"M 2"M DN80 DN100 DN150 DN200 DN250

Approval Holder:: Esco International

Company Name
Esco International
Address
Unit 8 Cae Ffwt Business Park Pendraw'r Llan Road Glan Conwy
Country
LL28 5SP

View All Listings by this Company

WRAS Approval Number: #250604704

UV Home’ range of UV disinfection units with 304L or 316L stainless steel bodies (see models). Maximum working pressure for UV HOME 2 & 3 is 6 bar. Maximum working pressure for UV HOME 6 & 9 is 10 bar. Maximum operating temperature 35°C.

Section:: 2411 Disinfection Equipment
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M) or 1 ½” BSP (M).
Marking:: Bio UV logo on body. Label attached to control panel, Manufacture date WW/MM/YY & Other tech info on label.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 30/06/2030
Model:: UV HOME 2 – 304L Stainless Steel, UV HOME 3 – 304L Stainless Steel, UV HOME 6 - 316L Stainless Steel, UV HOME 9- 316L Stainless Steel.

Approval Holder:: Bio-UV group

Company Name
Bio-UV group
Address
850 avenue Louis Médard Lunel
Postcode
34400
Country
France
Phone
+ 33 (0)4 26 89 98 77
General Email
dedet@bio-uv.com

View All Listings by this Company
Manufacturer:: Bio-UV group

Company Name
Bio-UV group
Address
850 avenue Louis Médard Lunel
Postcode
34400
Country
France
Phone
+ 33 (0)4 26 89 98 77
General Email
dedet@bio-uv.com

View All Listings by this Company

WRAS Approval Number: #250355077

'Tuffkote Bituminous Aluminium'. Factory applied, grey coloured, two-component crude oil bitumen coating. Mix in a 17.1:2.9 volume ratio and apply as per manufacturer's data sheet 'SPL/PMG/2019100166', 'Rev 2', dated '04/2024'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 250355077
Expiry date:: 31/03/2030

Approval Holder:: Shalimar Paints Ltd.

Company Name
Shalimar Paints Ltd.
Address
A1 & A2, UPSIDC Industrial Area, Sikandrabad, Distt. Bulandshahr, Sikandrabad, Uttar Pradesh, 203205
Country
India

View All Listings by this Company

WRAS Approval Number: #250455022

'GIX96W-BR & GIX99.7W-BR'. Cream coloured ceramic bearing rings manufactured by pressing, sintering & re-working. For use with water up to 85°C.

Section:: 5023 Ceramic
Expiry date:: 30/04/2030

Approval Holder:: Gimex Technische Keramiek, a division of Ammertech BV

Company Name
Gimex Technische Keramiek, a division of Ammertech BV
Address
Grasbeemd 21, 5705 DE Helmond
Country
Netherlands

View All Listings by this Company

WRAS Approval Number: #250455014

'ET-52184 & ET-52185'. Factory applied, black coloured water-based silicone coating comprising of an under-coat (ET-52184) and finishing coat (ET-52185). Apply as per manufacturer's instructions 'V8.2' issued January 2019. Cure both undercoat and finishing coat for 10 minutes@25°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 250455014
Expiry date:: 30/04/2030

Approval Holder:: ANHUI SHINHOO CANNED MOTOR PUMP Co., Ltd.

Company Name
ANHUI SHINHOO CANNED MOTOR PUMP Co., Ltd.
Address
No. 780, Mingchuan Road, High-Tech Zone, Hefei Anhui
Country
China

View All Listings by this Company