Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): ambient, near boiling, chilled or sparkling water. The spout incorporates a plastic aerator on the Sparkling/Ambient/Chilled outlet, and a separate outlet for the near boiling water. All models incorporate a vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature of 98°C. All other circuits have a maximum operating temperature of 65°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240102707

Note:

Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings and blue LLDPE tubing.

Size:

Sparkling/Ambient/Chilled inlet (model dependent): LLDPE pipe ¼”. Near boiling inlet: Silicone flexible pipe ID 7.7mm.

Marking:

Zip on operating member

Installation Requirements:

R001 R006 R008 R009 R160

Expiry date:

31/01/2029

Model:

95453xxx Arc Plus. 95454xxx Cube Plus. Where xxx denotes finish and can be replaced with: Z00 = CH Chrome, Z01 = BR Brushed Chrome, Z03 = FB Matt Black, Z05 = BRG Brushed Rose Gold, Z07 = BDG Brushed Gold, Z09 = BPT Gunmetal, Z11 = BNI Brushed Nickel. Each tap can be specified to dispense the following options: Near boiling and ambient. Near boiling, chilled and sparkling, Near boiling and chilled, Near boiling, Chilled and sparkling, Sparkling.

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Range of (swivel) spout outlets (brass bodies – various finishes) incorporating plastic aerators. Maximum operating temperature 65.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240402010

Note:

Open outlet use only.

Size:

M10 (F)

Marking:

Lefroy Brooks logo on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2029

Model:

PSH110 YY PSH109 YY Where YY denote the colour/plating options which can be replaced by, but not limited to: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Manufacturer:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of expansion vessels with stainless steel bodies and EPDM membranes. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1000 Expansion Vessels

Size:

See models.

Marking:

Varem, model, maximum temperature & maximum pressure on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

US050 - Maxivarem LS Pressure tanks for water pump systems 50L vert. 1” BSP (M). US060 - Maxivarem LS Pressure tanks for water pump systems 60L vert. 1” BSP (M). US080 - Maxivarem LS Pressure tanks for water pump systems 80L vert. 1” BSP (M). US100 - Maxivarem LS Pressure tanks for water pump systems 100L vert. 1” BSP (M). US150 - Maxivarem LS Pressure tanks for water pump systems 150L vert. 1”1/2 BSP (M). US200 - Maxivarem LS Pressure tanks for water pump systems 200L vert. 1”1/2 BSP (M). US300 - Maxivarem LS Pressure tanks for water pump systems 300L vert. 1”1/2 BSP (M). US500 - Maxivarem LS Pressure tanks for water pump systems 500L vert. 1”1/2 BSP (M). US051 - Maxivarem LS Pressure tanks for water pump systems 50L hor. 1” BSP (M). US061 - Maxivarem LS Pressure tanks for water pump systems 60L hor. 1” BSP (M). US081 - Maxivarem LS Pressure tanks for water pump systems 80L hor. 1” BSP (M). US101 - Maxivarem LS Pressure tanks for water pump systems 100L hor. 1” BSP (M). US151 - Maxivarem LS Pressure tanks for water pump systems 150L hor. 1”1/2 BSP (M). US201 - Maxivarem LS Pressure tanks for water pump systems 200L hor. 1”1/2 BSP (M). US301 - Maxivarem LS Pressure tanks for water pump systems 300L hor. 1”1/2 BSP (M).

Product Images

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Range of vertical and horizontal expansion vessels with EPDM membrane and stainless steel or galvanised steel connections. Maximum working pressures 10.0. Maximum operating temperature 85 °C.

Section:

1000 Expansion Vessels

Size:

¾” BSP (M) or 1” BSP (M).

Marking:

VAREM, year of production, model and further product information on adhesive label.

Installation Requirements:

R001 R535

Expiry date:

31/12/2028

Model:

Vertical models: S2005; S2008; S2012; S2019; S2020; E1024; S2025; S2040. Horizontal models: S2H19; S2H20.

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Range of shock arrestors with stainless steel bodies and EPDM diaphragm. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:

1000 Expansion Vessels

Size:

½” BSP(M).

Marking:

Center, model & WRAS on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Center Potable Shock Arrestor 0.16L G1/2”

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of filling loop assemblies, incorporating a stainless steel braided EPDM lined flexible hose, brass bodied isolation valve and a DZR brass non-verifiable double check valve assembly that incorporates an isolation valve. Model FL12041510 has a lanyard and end caps. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:

1015 Filling Loop

WRAS Approval Number:

240204702

Note:

To be used with copper pipe only to BS EN 1057

Size:

15mm Compression

Marking:

Intatec logo, flow arrow & CR on double check valve. Intatec logo, WRAS & year of manufacture (yyyy) on crimp connector

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

FL12041510 FL12041500 111341 111342 135202 120416.1 00107125

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Carbon block filter cartridge with plastic body. Maximum working pressure 8.2 bar. Cold water use.

Section:

1055 Filter Cartridges

Size:

32.94mm ØD

Marking:

Lincat, model and technical information on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Model:

FC04 Filter Cartridge Model added April 2024: FH04 Filter Head

Approval Holder:

Lincat Ltd

Company Name

Lincat Ltd

Address

Whisby Road Lincoln Lincolnshire

Postcode

LN6 3QZ

Phone

+44 (0) 1522 875500

General Email

sales@lincat.co.uk

View All Listings by this Company

Filter cartridge with plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

74mm OD 3.5 ISO Grohe thread.

Marking:

BWT, Grohe and flow arrow on body

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/01/2029

Model:

40691002 Grohe Blue Magnesium+Zinc

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

‘Hetta system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with multilayer pipe PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2311919

Size:

Compression: 16mm, 20mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.

Marking:

Compression fittings: Tweetop ‘T’ logo, size, EN1254-3, production date and manufacturing source on compression nut. Press fittings: Tweetop ‘T’ logo, letter for Type (L for elbow; T for Tee) and size on Body. Tweetop name and ‘T’ logo, size, U (press profile), ISO standard, production date and manufacturing source on sleeve. Key to production date/manufacturing source = aAY, with a (month), A (Year), Y (production facility). Where: a = Month, starting with a = January, b= February etc. A = Year, starting with G = 2018, H = 2019, I = 2020, J = 2021, K = 2022, L = 2023. Y = Manufacturing facility denoted by the letter L, S or A. e.g. bGA = manufactured February 2018 by facility A Pipe: , Hetta Systems, size, pressure ratings and date of manufacture (YYYY/MM/DD).

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

PRESS COUPLING: 06011003 - 16x16, 06011005 - 18x18, 06011007 - 20x20, 06011009 - 25x25, 06011011 - 32x32, 06011013 - 40x40, 06011015 - 50x50, 06011017 - 63x63. PRESS COUPLING-REDUCER: 06011103 - 18x16, 06011105 - 20x16, 06011107 - 25x16, 06011109 - 32x16, 06011111 - 20x18, 06011113 - 25x18, 06011115 - 32x18, 06011117 - 25x20, 06011119 - 32x20, 06011121 - 32x25, 06011122 - 40x20, 06011123 - 40x25, 06011124 - 50x25, 06011125 - 40x32, 06011126 - 50x32, 06011127 - 50x40, 06011120 - 63x25, 06011128 - 63x32, 06011129 - 63x40, 06011131 - 63x50. MALE PRESS CONNECTION: 06011205 - 16x½", 06011207 - 16x¾", 06011209 - 16x1", 06011211 - 18x½”, 06011213 - 18x¾”, 06011215 - 20x½", 06011217 - 20x¾", 06011219 - 20x1", 06011221 - 25x½", 06011223 - 25x¾", 06011225 - 25x1", 06011227 - 32x¾", 06011229 - 32x1", 06011231 - 32x1½", 06011233 - 32x1¼", 06011235 - 40x1¼", 06011237 - 50x1½", 06011239 - 50x2", 06011241 - 63x2". FEMALE PRESS CONNECTION: 06011305 - 16x½", 06011307 - 16x¾", 06011309 - 16x1", 06011311 - 18x½”, 06011313 - 18x¾”, 06011315 - 20x½", 06011317 - 20x¾", 06011319 - 20x1", 06011321 - 25x½", 06011323 - 25x¾", 06011325 - 25x1", 06011327 - 32x¾", 06011329 - 32x1", 06011331 - 40x1¼", 06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: 06011403 - 16x½", 06011405 - 20x¾", 06011407 - 20x1", 06011409 - 25x¾", 06011411 - 25x1", 06011413 - 32x1". PRESS ELBOW 90: 06012003 - 16x16, 06012005 - 18x18, 06012007 - 20x20, 06012009 - 25x25, 06012011 - 32x32, 06012013 - 40x40, 06012015 - 50x50, 06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: 06012103 - 16x½", 06012107 - 16x¾", 06012105 - 18x½”, 06012109 - 20x½", 06012111 - 20x¾", 06012113 - 25x½", 06012115 - 25x¾", 06012117 - 25x1", 06012119 - 32x1", 06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: 06012203 - 16x½", 06012205 - 16x¾", 06012207 - 18x½", 06012209 - 20x½", 06012211 - 20x¾", 06012213 - 25x½", 06012215 - 25x¾", 06012217 - 25x1", 06012219 - 32x1", 06012222 - 40x1½", 06012225 - 50x1½". PRESS ELBOW 90 REDUCER: 06012303 - 20x16, 06012305 - 25x16, 06012307 - 25x20, 06012309 - 32x20, 06012311 - 40x25, 06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: 06012403 - 16x½", 06012404 - 16x½"x16, 06012405 - 18x½", 06012407 - 20x½". PRESS TEE: 06013003 - 16x16x16, 06013005 - 18x18x18, 06013007 - 20x20x20, 06013009 - 25x25x25, 06013011 - 32x32x32, 06013013 - 40x40x40, 06013015 - 50x50x50, 06013017 - 63x63x63.

PRESS TEE WITH REDUCER: 06013103 - 16x25x16, 06013105 - 16x20x16, 06013106 - 16x18x16, 06013107 - 20x16x16, 06013108 - 18x16x16, 06013109 - 20x16x20, 06013110 - 18x16x18, 06013111 - 20x18x20, 06013113 - 20x20x16, 06013115 - 20x25x20, 06013117 - 25x16x25, 06013119 - 25x18x25, 06013121 - 25x20x25, 06013123 - 25x20x20, 06013125 - 25x25x20, 06013127 - 25x32x25, 06013129 - 32x16x32, 06013131 - 32x20x32, 06013133 - 32x25x32, 06013134 - 40x20x40, 06013135 - 40x25x40, 06013137 - 40x32x40, 06013138 - 50x25x50, 06013139 - 50x32x50, 06013141 - 50x40x50, 06013142 - 63x32x63, 06013143 - 63x40x63, 06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: 06013203 - 16x½"x16, 06013205 - 20x½"x20, 06013207 - 20x¾"x20, 06013209 - 25x½"x25, 06013211 - 25x¾"x25, 06013213 - 25x1"x25, 06013215 - 32x¾"x32, 06013217 - 32x1"x32, 06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: 06013303 - 16x½"x16, 06013305 - 20x½"x20. BRASS STOP END PRESS FIT: 06011803 - 16. COMPRESSION COUPLING: 06021001 - 16x16, 06021003 - 20x20 . COMPRESSION COUPLING REDUCER: 06021101 - 20x16, 06021103 - 25x20. MALE COMPRESSION CONNECTION: 06021201 - 16x½", 06021203 - 16x¾", 06021205 - 16x1", 06021207 - 20x½", 06021209 - 20x¾", 06021211 - 20x1". FEMALE COMPRESSION CONNECTION: 06021301 - 16x½", 06021303 - 16x¾", 06021305 - 16x1" , 06021307 - 20x½", 06021309 - 20x¾", 06021311 - 20x1". COMPRESSION ELBOW 90: 06022001 - 16x16, 06022003 - 20x20. COMPRESSION ELBOW 90 WITH MALE thread: 06022101 - 16x½", 06022103 - 16x¾", 06022105 - 20x½", 06022107 - 20x¾". COMPRESS. ELBOW 90 WITH FEMALE thread: 06022201 - 16x½", 06022203 - 16x¾", 06022205 - 20x½", 06022207 - 20x¾". COMPRESSION TEE: 06030201 - 16x16x16, 06030203 - 20x20x20. COMPRESSION TEE WITH REDUCER: 06031201 - 16x25x16, 06031203 - 20x16x20, 06031205 - 20x25x20. COMPRESSION TEE WITH FEMALE thread: 06032201 - 16x½"x16, 06032203 - 20x½"x20, 06032205 - 20x¾"x20. COMPRESSION TEE WITH MALE thread: 06033201 - 16x½"x16, 06033203 - 20x½"x20. COMPRESSION ELBOW 90 - TAP CONN: 06022401 - 16x½"F, 06022403 - 20x½"F. COMPRESSION FOUR WAY FITTING: 06024001 - 16x16x16x16, 06024003 - 20x20x20x20. MULTILAYER PIPE PERT/AL/PERT: 06010103/100 - 16x2, 06010103/200 - 16x2, 06010103/600 - 16x2, 06010103/4 - straight bars 16x2,0, 06010105/200 - 18x2, 06010107/100 - 20x2, 06010107/200 - 20x2, 06010107/4 - straight bars 20x2,0, 06010109/50 - 25x2,5, 06010109/100 - 25x2,5, 06010109/4 - straight bars 25x2,5, 06010111/50 - 32x3, 06010111/4 - straight bars 32x3,0, 06010113 - straight bars 40x4,0, 06010115 - straight bars 50x4,5, 06010117 - straight bars 63x6,0, 06010103/100 - 16x2.

Approval Holder:

Hetta Systems (UK) Ltd.

Company Name

Hetta Systems (UK) Ltd.

Address

UNIT E5 TRIDENT BUSINESS PARK DATEN AVENUE

Postcode

WA3 6AX

Country

WARRINGTON

View All Listings by this Company

Manufacturer:

Tweetop Sp Z.o.o

Company Name

Tweetop Sp Z.o.o

Address

ul.Ludowa 24 C 71-700 Szczecin Poland

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312082

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged

Marking:

Davinci on dataplate on body. SIZE, DN & EN545 casted on the body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

330

Approval Holder:

DAVINCI VALVES

Company Name

DAVINCI VALVES

Address

Room 3109 Unit 1 Building 2 No. 68 Zhiquan Section Dongda Street Jinjiang District CHENGDU

Postcode

610065

Country

China

Phone

+34616553797

General Email

alex@davincivalves.com

View All Listings by this Company