Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2306325

Range of basin bidet mixers with brass bodies, incorporating a ceramic cartridge headwork, and a single lever operating member. The spout incorporates a plastic aerator within a swivel nozzle. This product is supplied with a lever type pop up waste (not tested). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0400 Combination Tap Assemblies - Bidet
Section Subtitle:: Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:: 2306325
Size:: Stainless steel braided PEX lined flexible hoses incorporating 3/8” captive nut end connections.
Marking:: Hansgrohe or handle
Installation Requirements:: R001 R006 R009
Expiry date:: 30/06/2028
Model:: 72 210 xxx 72 211 xxx 72 212 xxx 72 213 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2306014

Range of ceramic cartridges or 2-way ceramic disc diverter headworks with plastic bodies, EPDM ‘O’-rings and/or gaskets, for insertion into specifically dimensioned bores. The JA01AJ and AH01AJ models incorporate a thermostatic element. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 2306014
Size:: GL02GJ, GH02GJ: 25mm OD. FL02GJ, FL02BD, FH02GJ, FH02BD, FL19GJ: 35mm OD. DL02GJ, DL02BD, DH02GJ, DH02BD, JA01AJ, AH01AJ: 40mm OD.
Marking:: Hain-Yo, made in Taiwan, model number and batch code on body.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: Ceramic cartridge: GL02GJ, GH02GJ, FL02GJ, FL02BD, FH02GJ, FH02BD, DL02GJ, DL02BD, DH02GJ, DH02BD, JA01AJ, AH01AJ. 2-way ceramic disc: FL19GJ.

Approval Holder:: Hain-Yo Enterprises Co. Ltd.

Company Name
Hain-Yo Enterprises Co. Ltd.
Address
No. 102 Tien-Tung Rd. Ho-Mei, Changhua
Country
Taiwan,

View All Listings by this Company
Manufacturer:: Hain-Yo Enterprises Co. Ltd.

Company Name
Hain-Yo Enterprises Co. Ltd.
Address
No. 102 Tien-Tung Rd. Ho-Mei, Changhua
Country
Taiwan,

View All Listings by this Company

WRAS Approval Number: #2306026

Range of ceramic cartridges with plastic bodies, for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 2306026
Size:: 40, 41 or 42mm OD.
Marking:: Kerox and date of manufacture (DDMMYY) on body.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: K 40 A, K 40 A HWS, K 40 A HWS ND, K 40 B, K 40 B HWS, K 42 C, K 42 C HWS, K 42 D, K42 D HWS, K 40 A SMART, K 40 B SMART, K2 40 A, K2 40 B, KN 40 A HWS, KN 40 A HWS ECO, KN 40 B HWS, KN 40 B HWS ECO, KN 41 A HWS KLUDI ND, KO 40 A, KO 40 B, NKB 40 A HWS, NKJ 40 A HWS, NKB 40 B HWS, NKJ 40 B HWS, BK 40 A P, BK 40 B P, BK 42 C P, BK 42 D P. Models added February 2026: K 40 HF A HWS K 40 HF A HWS with metal lever Where: K and K2 = Standard models KO = Standard model for line fittings KN = Advanced standard model NKJ = Energy-saving single-lever type, right side NKB = Energy-saving single-lever type, left side BK = Water & Energy saving 40 = Ø40 mm 41 = Ø41 mm 42 = Ø42 mm A = Flat bottom, two locating pins B = Extended bottom, two locating pins C = Flat bottom, one locating pin D = Extended bottom, one locating pin ND = Model tor low pressurized supply system HWS = "Hot Water Supply" (sequential mixer) ECO = Economical function ND = Model for low pressurized supply system SMART = Optimized Standard model P = Plastic actuator stem KLUDI = Customised version of cartridge for KLUDI. K = Kerox, HF = High flow (flow improved of standard model)

Approval Holder:: Kerox Ltd.

Company Name
Kerox Ltd.
Address
Kerox u. 1. Sóskút
Country
Hungary
Phone
+36 23 560 700/150 ext.
General Email
evaszlauko@kerox.net

View All Listings by this Company
Manufacturer:: Kerox Ltd.

Company Name
Kerox Ltd.
Address
Kerox u. 1. Sóskút
Country
Hungary
Phone
+36 23 560 700/150 ext.
General Email
evaszlauko@kerox.net

View All Listings by this Company

WRAS Approval Number: #2305013

Thermostatic cartridge with brass body for insertion into specifically dimensioned bores Maximum operating temperature 85°C

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 2305013
Size:: 34mm
Marking:: SCCHHF (manufacturer’s trademark) and WRAS on body
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: TH100A-5S1

Approval Holder:: Kaiping S.C.C Cartridge Co Ltd

Company Name
Kaiping S.C.C Cartridge Co Ltd
Address
No 37 Minle road Shuikou Town, Kaiping City, Guangdong Province
Country
China

View All Listings by this Company
Manufacturer:: Kaiping S.C.C Cartridge Co Ltd

Company Name
Kaiping S.C.C Cartridge Co Ltd
Address
No 37 Minle road Shuikou Town, Kaiping City, Guangdong Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2306318

Thermostatic cartridges with plastic bodies, stainless steel mesh strainer and EPDM ‘O’ rings. For insertion into specifically dimensioned bores. Maximum operating pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 2306318
Size:: 35mm OD.
Marking:: Guoren on body
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: GR-FX-P50

Approval Holder:: Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.

Company Name
Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
Address
No. 2 RongShi Road, ChaYu Industrial Zone, Town ZeGuo
Country
WenLing,

View All Listings by this Company