Range of tap adaptors with chrome plated (brass or plastic) bodies. The outlet of some models incorporates a plastic flow restrictor. The side mount adaptors (except 90-001801) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The side mount adaptors (except 90-001804) incorporate a piston type component which is intended to stop the flow to change the filter. All side mount adaptors and 90-001869 & 90-001873 Fixed Position Adaptors have a maximum working pressure of 5.0 bar. All other models are open outlet use only. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241202044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model

Marking:

T safe on body

Installation Requirements:

R001 R040

Expiry date:

31/12/2029

Model:

Connectors: 01-990198 - M21,5/M24F 01-990246 - M24F 01-990247 - M18M to M24F 01-990248 - ½" BSPM to M24F 01-990260 - M16M to M24F 01-990265 - M16M to M24F 01-990267 - M20M to M24F 90-001851 - 15-29mm Jubilee clip Side Mount Adaptors: 90-001801 - M24M/M22 F 90-001804 with flow restrictor - M24M/M22F 90-001805 - M24M/M22F 90-001806 with flow restrictor - M24M/M22F 90-001814 with flow restrictor - M24M 90-001815 - M24M 90-001816 with flow restrictor - M24M 90-001844 with flow restrictor - M24M 90-001854 with flow restrictor - M24M Fixed Position Adaptor: 90-001861 - M24M/M22F 90-001862 - M24M/M22F 90-001864 - M21.5M 90-001865 - M24M 90-001866 - M21.5M 90-001867 - M24M 90-001868 - M24M 90-001869 - M24M 90-001871 - M24M 90-001872 - ½” BSP (F) 90-001873 - ½” BSP (F) 90-001875 - ½” BSP (F)

Product Images

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

View All Listings by this Company

Range of exposed bath fillers (brass body, various finishes) incorporating a ceramic cartridge headwork, controlling both flow and temperature with a single lever operating member. The products incorporate integrated overflow and click type pop-up waste systems. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2211066

Size:

3/4" BSP (M)

Marking:

Eastbrook Logo on operating member.

Installation Requirements:

R001 R576

Expiry date:

30/11/2027

Model:

98.4001 98.4002 98.4003

Approval Holder:

Eastbrook Company

Company Name

Eastbrook Company

Postcode

GL4 3DB

Country

United Kingdom

General Email

christopher.russell@eastbrookco.com

View All Listings by this Company

Range of Grohe ‘Atrio’ wall mounted spout outlets (brass bodies - various finishes), the outlet incorporates a plastic aerator. Maximum operating temperature: 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250102048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Grohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

13.139.xxx 13.487.xxx Where xxx / xx3 denotes finish, can be replaced by: 000 / 003 – Chrome DC0 / DC3 – Supersteel DA0 / DA3 – Warm sunset AL0 / AL3 – Brushed hard graphite GL0 / GL3 – cool sunrise

Product Images

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of press fittings (brass bodies - various finishes) with stainless steel press (‘TH’ profile) collars and EPDM O-rings for use with “SOUTH PRESS” range of PEX/AL/PEX multilayer pipe (for press fitting connections and compression for EHA adaptor fittings only) or copper pipe manufactured to EN1057 (compression connections). Maximum operating temperature: 95°C. Maximum operating pressure: 10 bar.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241102072

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Fittings: SCS Logo and size on body. Pipe: SOUTH PRESS, Size, Date of manufacture (DD/MM/YY), Pipe Standard and other information on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipes (diameter): SP – 16mm, SP – 20mm, SP – 25mm, SP– 26mm, SP – 32mm. Fittings: S71011 16MM STRAIGHT COUPLER P X P S71022 20MM STRAIGHT COUPLER P X P S71033 26MM STRAIGHT COUPLER P X P S71044 32MM STRAIGHT COUPLER P X P S71021 20MM X 16MM RED. STRAIGHT COUPLER P S71031 26MM X 16MM RED. STRAIGHT COUPLER P S71032 26MM X 20MM RED. STRAIGHT COUPLER P S71041 32MM X 16MM RED. STRAIGHT COUPLER P S71042 32MM X 20MM RED. STRAIGHT COUPLER P S71043 32MM X 26MM RED. STRAIGHT COUPLER P S71111 1/2" X 16MM STRAIGHT COUPLER MI X P S71112 1/2" X 20MM STRAIGHT COUPLER MI X P S71121 3/4" X 16MM STRAIGHT COUPLER MI X P S71122 3/4" X 20MM STRAIGHT COUPLER MI X P S71123 3/4" X 26MM STRAIGHT COUPLER MI X P S71132 1" X 20MM STRAIGHT COUPLER MI X P S71133 1" X 26MM STRAIGHT COUPLER MI X P S71134 1" X 32MM STRAIGHT COUPLER MI X P S71211 1/2" X 16MM STRAIGHT COUPLER FI X P S71212 1/2" X 20MM STRAIGHT COUPLER FI X P S71221 3/4" X 16MM STRAIGHT COUPLER FI X P S71222 3/4" X 20MM STRAIGHT COUPLER FI X P S71223 3/4" X 26MM STRAIGHT COUPLER FI X P S71232 1" X 20MM STRAIGHT COUPLER FI X P S71233 1" X 26MM STRAIGHT COUPLER FI X P S71234 1" X 32MM STRAIGHT COUPLER FI X P S71411 16MM X 1/2" STRAIGHT TAP CONNECTOR S71422 20MM X 3/4" STRAIGHT TAP CONNECTOR S71433 26MM X 1" STRAIGHT TAP CONNECTOR S71511 16MM ELBOW P X P S71522 20MM ELBOW P X P S71533 26MM ELBOW P X P S71544 32MM ELBOW P X P S74533 26mm 45° Elbow S74544 32mm 45° Elbow S71611 1/2" X 16MM ELBOW MI X P S71612 1/2" X 20MM ELBOW MI X P S71621 3/4" X 16MM ELBOW MI X P S71622 3/4" X 20MM ELBOW MI X P S71623 3/4" X 26MM ELBOW MI X P S71632 1" X 20MM ELBOW MI X P S71633 1" X 26MM ELBOW MI X P S71634 1" X 32MM ELBOW MI X P S71711 1/2" X 16MM ELBOW FI X P S71712 1/2" X 20MM ELBOW FI X P S71721 3/4" X 16MM ELBOW FI X P S71722 3/4" X 20MM ELBOW FI X P S71723 3/4" X 26MM ELBOW FI X P S71732 1" X 20MM ELBOW FI X P S71733 1" X 26MM ELBOW FI X P S71734 1" X 32MM ELBOW FI X P S72111 1/2"X 16MM WALL PLATE ELBOW FI X P S72112 1/2"X 20MM WALL PLATE ELBOW FI X P S72711 16MM ELBOW TAP CONNECTOR S718111 16MM EQUAL TEE P X P X P S718222 20MM EQUAL TEE P X P X P S718333 26MM EQUAL TEE P X P X P S718444 32MM EQUAL TEE P X P X P S718112 16MM X 16MM X 20MM RED. TEE P X P X P S718211 20MM X 16MM X 16MM RED. TEE P X P X P S718212 20MM X 16MM X 20MM RED. TEE P X P X P S718221 20MM X 20MM X 16MM RED. TEE P X P X P S718223 20MM X 20MM X 26MM RED. TEE P X P X P S718311 26MM X 16MM X 16MM RED. TEE P X P X P S718312 26MMX 16MM X 20MM RED TEE PXPXP S718313 26MM X 16MM X 26MM RED. TEE P X P X P S718321 26MM X 20MM X 16MM RED. TEE P X P X P S718322 26MM X 20MM X 20MM RED. TEE P X P X P S718323 26MM X 20MM X 26MM RED. TEE P X P X P S718331 26MM X 26MM X 16MM RED. TEE P X P X P S718332 26MM X 26MM X 20MM RED. TEE P X P X P S718334 26MM X 26MM X 32MM RED. TEE P X P X P S718411 32MM X 16MM X 16MM RED. TEE P X P X P S718414 32MM X 16MM X 32MM RED. TEE P X P X P S718422 32MM X 20MM X 20MM RED. TEE P X P X P S718423 32MM X 20MM X 26MM RED. TEE P X P X P S718424 32MM X 20MM X 32MM RED. TEE P X P X P S718432 32MM X 26MM X 20MM RED. TEE P X P X P S718433 32MM X 26MM X 26MM RED. TEE P X P X P S718434 32MM X 26MM X 32MM RED. TEE P X P X P S718441 32MM X 32MM X 16MM RED. TEE P X P X P S718442 32MM X 32MM X 20MM RED. TEE P X P X P S718443 32MM X 32MM X 26MM RED. TEE P X P X P S730111 16MM X 16MMX 1/2" TEE P X P X FI S730112 16MM X 16MMX 3/4" TEE P X P X FI S730221 20MM X 20MMX 1/2" TEE P X P X FI S730222 20MM X 20MM X 3/4" TEE P X P X FI S730331 26MM X 26MM X 1/2" TEE P X P X FI S730332 26MM X 26MM X 3/4" TEE P X P X FI S730333 26MM X 26MM X 1" TEE P X P X FI S730442 32MM X 32MM X 3/4" TEE P X P X FI S730443 32MM X 32MM X 1" TEE P X P X FI S75111 16MM STOP END S75122 20MM STOP END S75133 26MM STOP END S75144 32MM STOP END SCRE11 16MM RADIATOR ELBOW C/W 300MM CHROME PIPE (300MM) SJC11 1/2" X 16MM COMPRESSION COUPLER C X P SJC12 1/2" X 20MM COMPRESSION COUPLER C X P SJC21 3/4" X 16MM COMPRESSION COUPLER C X P SJC22 3/4" X 20MM COMPRESSION COUPLER C X SJC23 3/4" X 26MM COMPRESSION COUPLER C X P SJC33 1" X 26MM COMPRESSION COUPLER C X P SJC34 1" X 32MM COMPRESSION COUPLER C X P SJM11 15MM X 16MM COMPRESSION COUPLER CX P SJM12 15MM X 20MM COMPRESSION COUPLER CX P SJM21 22MM X 16MM COMPRESSION COUPLER CX P SJM22 22MM X 20MM COMPRESSION COUPLER CX P SJM23 22MM X 26MM COMPRESSION COUPLER CX P SJM33 28MM X 26MM COMPRESSION COUPLER C SJM34 28MM X 32MM COMPRESSION COUPLER CX P SEJC11 1/2" X 16MM COMPRESSION ELBOW SEJC22 3/4" x 20MM COMPRESSION ELBOW SEJM11 15MM X 16MM COMPRESSION ELBOW SEJM22 22MM X 20MM COMPRESSION ELBOW NI50028 28MM X 26MM PFP NUT & INSERT ADAPT TO COPPER COMP NI50001 1" X 26MM PFP NUT & INSERT ADAPT TO COPPER COMP NI40031 3/4"x16MM PFP NUT & INSERT ADAPT TO COPPER COMP NI40022 22 MM X 20MM PFP NUT & INSERT ADAPT TO COPPER COMP NI40001 3/4" X 20MM PFP NUT & INSERT ADAPT TO COPPER COMP NI30001 14.7/15MM x 16MM PFP NUT & INS ADAPT - COPPER COMP SSA11 1/2" X 16MM STUB ADAPTOR SSA12 1/2" X 20MM STUB ADAPTOR SSA22 3/4" X 20MM STUB ADAPTOR SSA23 3/4" X 26MM STUB ADAPTOR SSA33 1" X 26MM STUB ADAPTOR SSA34 1" X 32MM STUB ADAPTOR SSAM11 16MM X 15MM METRIC STUB ADAPTER SSAM22 22MM X 20MM METRIC STUB ADAPTER SSAM23 22MM X 26MM METRIC STUB ADAPTER SSAM33 26MM X 28MM METRIC STUB ADAPTER SSAM34 28MM X 32MM METRIC STUB ADAPTER SSB11 1/2" X 16MM SHOWER BRACKET 150MM CENTRES FI X P SCA11 1/2"/15MM X 16MM PRESS ADAPTOR TO COMPRESSION SCA22 3/4" X 20MM PRESS ADAPTOR TO COMPRESSION

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

A range of black polyethylene electrofusion fittings from DN 20 to DN 1200 for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. A range of black polyethylene butt-welded fittings from DE 20 to DE 1200 fittings for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. Maximum working pressure: 20.0 bar for SDR 9 Maximum working pressure: 16.0 bar for SDR 11 Maximum working pressure: 10.0 bar for SDR 17. For above and below ground and cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241204003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Plastialia logo, DN, PE100-RC, model code hot stamped on fitting body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

ELECTROFUSION FITTINGS PLASTFAST RANGE DN20 to DN400 PLAST RANGE DN450 to DN1200 BUTTWELDED FITTNGS PLAST RANGE DN 20 to DN1200 COUPLER MPXXXB - COUPLER SDR 17 - DN 90 – DN1200 MPXXXC - COUPLER SDR 11 - DN 20 – DN900 MPXXXG - COUPLER SDR 9 - DN 32 – DN450 ELBOW 90° GE9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN315 ELBOW 45° GE4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 315 ELBOW 22.5° GE2250PXXXC - ELBOW 22,5° SDR 11 - DN 90 – DN 315 ELBOW 11,25° GE1125PXXXC - ELBOW 11,25° SDR 11 - DN 90 – DN 315 TEE 90° TEPXXXC - TEE 90° SDR 11 - DN 20 – DN 315 REDUCED TEE 90° TREPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 315 DN REDUCER REPXXXC - REDUCER SDR 11 - DN 25 – DN 315 END CAP CAEPXXXC - END CAP SDR 11 - DN 20 – DN 315 TAPPING TEE CPCPXXXC - TAPPING TEE SDR 11 - DN 40 – DN 315 CPCPVXXXC - VALVE TAPPING TEE SDR 11 - DN 63 – DN 315 SADDLE CPSPXXXC - SADDLE SDR11 – DN 20 – DN 900 SPIGOT END FITTING ADAPTER FOR FLANGES CPXXXB - ADATTATORE PER FLANGE SDR 17 - DN 90 – DN 1200 CPXXXC - ADATTATORE PER FLANGE SDR 11 - DN 20 – DN 900 CPXXXG - ADATTATORE PER FLANGE SDR 9 - DN 32 – DN 450 END CAPS CAPXXXB - END CAP SDR 17 - DN 90 – DN 1200 CAPXXXC - END CAP SDR 11 - DN 20 – DN 900 CAPXXXG - END CAP SDR 9 - DN 32 – DN 450 TEE 90° TPXXXB - TEE 90° SDR 17 - DN 90 – DN 630 TPXXXC - TEE 90° SDR 11 - DN 20 – DN 630 TPXXXG - TEE 90° FROM DE 63 TO DE 630 SDR 9 - DN 32 – DN 450 REDUCED TEE 90° TRPXXXB - REDUCED TEE 90° SDR 17 - DN 90 – DN 630 TRPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 630 TRPXXXG - REDUCED TEE 90° SDR 9 - DN 110 – DN 450 CROSS CRPXXXB - CROSS SDR 17 - DN 90 – DN 355 CRPXXXC - CROSS SDR 11 - DN 63 - DN, 355 TEES 45° T4PXXXB - TEE 45° SDR 17 - DN 90 – DN 160 T4PXXXC - TEE 45° SDR 11 - DN 20 – DN 160 ELBOW 90° G9PXXXB - ELBOW 90° SDR 17 - DN 90 – DN 630 G9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN 630 G9PXXXG - ELBOW 90° SDR 9 - DN 63 – DN 450 ELBOW 45° G4PXXXB - ELBOW 45° SDR 17 - DN 90 – DN 630 G4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 630 G4PXXXG - ELBOW 45° SDR 9 - DN 63 – DN 450 DN REDUCER FITTINGS RPXXXB - REDUCER SDR 17 - DN 110 – DN 1200 RPXXXC - REDUCER SDR 11 - DN 25 – DN 900 RPXXXG - REDUCER SDR 9 - DN 250 – DN 450 TRANSITIONAL FITTINGS RTOMPXXXC - MALE TRANSITION PE/BRASS SDR 11 – DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTOFPXXXC - FEMALE TRANSITION PE/BRASS SDR 11 - DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTFZRPXXXC - MALE TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” RTSRPXXXC - WELD TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” First part explains the type of product (e.g. “M = coupler”, “GE9 = 90°elbow”, etc.) PXXXX is the dimension. B, C and G represent the different SDR.

Product Images

Manufacturer:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

Country

Italy

View All Listings by this Company