'Rubalit A 1896'. White coloured, dry-pressed ceramic disc. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

30/06/2030

Approval Holder:

CeramTec GmbH

Company Name

CeramTec GmbH

Address

Luitpoldstr. 15, 91207 Lauf

Country

Germany

Phone

+49 71536 11-0

General Email

info@ceramtec.de

View All Listings by this Company

EUROKOTE® 711.92BF bleu 5012, EUROKOTE® 711.92BF bleu 5015, EUROKOTE® 711.92BF bleu 5005 CR, EUROKOTE® 711.92BF bleu 5005 & EUROKOTE® 711.92BF bleu 5017. EUROKOTE® 711.92BF noir 9005. EUROKOTE® 711.92 bleu 5012, EUROKOTE® 711.92 bleu 5015, EUROKOTE® 711.92 bleu 5005, EUROKOTE® 711.92 bleu 5005 CR & EUROKOTE® 711.92 bleu 5017. EUROKOTE® 711.92 noir 9005. EUROKOTE® 711.92 BF Brun Rouge & 711.92 Brun Rouge Factory applied, blue, black or red coloured epoxy coatings. Apply as per manufacturer's technical data sheets dated 04/03/2025. Cure for 2 minutes@200°C. For use with water up to 85°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250855004

Expiry date:

31/08/2030

Approval Holder:

BS Coatings

Company Name

BS Coatings

Address

Allee Paul Sabatier, BP 88, 27940 Aubevoye

Country

France

Phone

+ 33 32773077

View All Listings by this Company

'Badadur PBT9 GF30 graphit 371 (grey coloured) & Badadur PBT9 GF30 Alpinweiss 230c (white coloured). Injection moulded Polybutylene terephthalate (30% glass fibres) materials. For use with water up to 65°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

1/12/2030

Approval Holder:

Bada AG

Company Name

Bada AG

Address

Untere Strut 1, D-77815 Bühl/Baden

Country

Germany

General Email

waldecker@bada.de

View All Listings by this Company

‘RIALENE P 100 SGFxx KTW grau K 7-128, RIALENE P 100 SGFxx KTW weiß K 9-112, RIALENE P 100 SGFxx KTW schwarz’, injection moulded polypropylene materials available in grey, white and black. ‘RIALENE P 100 SGFxx KTW natur(al)’, natural (appears off-white), injection moulded, polypropylene material was added to the approval in February 2026. The ‘xx’ in the material name can be replaced with any number between ‘10’ and ‘50’. For use with water up to 85°C.

Section:

5265 Polypropylene

Section Subtitle:

Material only. Components made from materials listed in this section may require to be submitted for audit tests.

WRAS Approval Number:

251055008

Expiry date:

31/10/2030

Approval Holder:

RIA-Polymers GmbH.

Company Name

RIA-Polymers GmbH.

Address

Schwarzwaldring 2, 78658 Zimmern o.R, BW 78658

Country

Germany

View All Listings by this Company

'CSTD/BS6920-BA60' (shore hardness 60), 'CSTD/BS6920-BA70' (shore hardness 70) and 'CSTD/BS6920-BA75' (shore hardness 75). Black coloured, compression moulded EPDM materials. Tested in-radius size 1.05mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

241255076

Expiry date:

31/12/2029

Approval Holder:

Gif Plastik Sanayi Ticaret Ltd. Sti

Company Name

Gif Plastik Sanayi Ticaret Ltd. Sti

Address

Kayapa OSB Mah. Nergiz (530) Cad. No. 7, Nilufer, Bursa 16315

Country

Turkey

View All Listings by this Company